Latest clutch wire scrap Tenders | Government clutch wire scrap Tenders

State Government

CTN :45415497

18 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of spare materials/cards for msdac, frauscher make. - supply of power supply board psc101 as per rdso specification no. rdso/spn/176/2013 ver.-3 suitable with existing installations of msdac frauscher make. inspection- consignee, supply of reset box card as per rdso specification no. rdso/spn/176/2013 ver.-3 suitable with existing installations of msdac frauscher make. inspection- consignee, supply of communication board as per rdso specification no. rdso/spn/176/2013 ver.-3 suitable with existing installations of msdac frauscher make. inspection- consignee, supply of input/output board as per rdso specification no. rdso/spn/176/2013 ver.-3 suitable with existing installations of msdac frauscher make. inspection- consignee, supply of wheel sensor with 5 mtr moulded cable 60kg as per rdso specification no. rdso/spn/176/2013 ver.-3 suitable with existing installations of msdac frauscher make. inspection- rdso/rites, supply of wheel sensor rsr180-001 with 10m cable rsr180-001 as per rdso specification no. rdso/spn/176/2013 ver.-3 suitable with existing installations of msdac frauscher make. inspection- consignee, supply of wheel sensor rsr180-001 with 15m cable rsr 180-001 as per rdso specification no. rdso/spn/176/2013 ver.-3 suitable with existing installations of msdac frauscher make. inspection- rdso/rites, supply of over voltage protection (bsi004) as per rdso specification no. rdso/spn/176/2013 ver.-3 suitable with existing installations of msdac frauscher make. inspection- consignee, supply of evaluation board aeb, part no. 24050 as per rdso specification no. rdso/spn/176/2013 ver.-3 suitable with existing installations of msdac frauscher make. inspection- rdso/rites, supply of back plane bp-pwr, part no. 19952 as per rdso specification no. rdso/spn/176/2013 ver.-3 suitable with existing installations of msdac frauscher make. inspection- consignee, supply of back plane bp-exb-1, part no. 19956 as per rdso specification no. rdso/spn/176/2013 ver.-3 suitable with existing installations of msdac frauscher make. inspection- consignee, supply of lv (line verification) box - lvb-01 as per rdso specification no. rdso/spn/176/2013 ver.-3 suitable with existing installations of msdac frauscher make. inspection- consignee, supply of track side connection box, part no. pc0101 as per rdso specification no. rdso/spn/176/2013 ver.-3 suitable with existing installations of msdac frauscher make. inspection- consignee, supply of rail claw as per rdso specification no. rdso/spn/176/2013 ver.-3 suitable with existing installations of msdac frauscher make. inspection- consignee

corporations/Associations/Others

CTN :45424585

08 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For auction sale of scrap sheared body scrap(l),scrap door with bonnet, fender & boot trunk with glass and plastic,scrap glass,scrap wiring harness,scrap alloy wheel,scrap fabric,scrap mix steel with dead axle, fuel tank etc,scrap brake booster w/o cylinder,mix miscellaneous waste with sand,plastic scrap-bumper (pcb),plastic scrap-dashboard (pcb),plastic scrap- headlights tail lights (pcb),plastic scrap (pcb),scrap automotive seats,scrap compressor,scrap shocker,scrap rubber (pcb category),scrap defaced engine (4w),scrap alternator/ starter,scrap battery bulk (pcb category),scrap motor-radiator fan/blower/wiper motor (w/o),scrap e-waste with speakers (pcb category),scrap cutted seat belt,scrap empty catalytic converter,scrap tyres with and without rim (4w),scrap piping,scrap chassis,scrap steering column w/o motor,scrap leaf spring,scrap wiper blade w/o motor,scrap steering rack w/o motor,scrap defaced cng/lpg cylinder,scrap radiator and condenser,scrap clutch wire,scrap aluminum piping with rubber,scrap brake booster cylinder,used mix oil and fuel,defaced engine scrap (2w),defaced engine scrap (cv),scrap tyres with and without rim (2w),scrap sheared body scrap(h)

State Government

CTN :45431816

16 Jun, 2026 69.6 Thousand

Allahabad - Uttar Pradesh

Tender For for laying work of spare 33 kv 1x630 sq mm copper cable for 40 mva tf4 lv bay at 132 kv ss minto park,prayagraj

Central Government / Public Sector

CTN :45438006

03 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For supply of set of panels to edts-355, rev-1, amd-1 to 6 (amendment-5 not applicable) without pump circuit switch gears i.e. mpcb & contactors mentioned at s. no. 36, 43 & 44 of bom of annexure-a (not required in the hv panel) for regular lhb non ac coaches. (1) low voltage panel shall be supplied as per rcf drg.no. cc-72445 alt-a or latest and additional requirement, top & bottom cable entry holes & earthing lugs shall be provided as per icf drg.no icf/sk3-7-2-082, alt-nil or latest. (2) drg.no.ls71103 alt-a anx-1&2 shall be followed for door stopper arrangement and stiffener in hv panel. (3) drg.no.sked-646 icf anx-2 shall be followed for hv panel lh & rh side holes, wsp mounting holes & provision of poly-carbonate sheet. (4) the rbc cum ebc mcb's and its indications shall be provided in the hv & lv panels as per rdso modification sheet no. rdso/pe/ms/ac/0094-2024 (rev 0) and rdso/pe/ms/ac/0095-2024 (rev 0). (5) packing instruction: pi-115 ver.3.0 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45417869

01 Jul, 2026 67.00 Lacs

Patiala - Punjab

Tender For repair / maint of hv / lv electrcal line overhead/under ground cable, lt panel/feeder pillar, security light panels, timer box at sec b under ge (south) patiala

Central Government/Public Sector

CTN :45407088

12 Jun, 2026 NA

Ramgarh - Jharkhand

Tender For supply of lv bushing arrangement with connecting palm , neutral bushing arrangement with connecting palm , hv supporting insulator , hv cable glands , hv copper bus bar , neutral bushing ct

Central Government/Public Sector

CTN :45405774

02 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of set of panels to edts-355, rev-1, amd-1 to 6 (amendment-5 not applicable) with pumpcircuit switch gears for lhb non-ac scn coaches with under slung water tank. note: 1. low voltage panel shall be supplied as per rcf drg.no. cc-72445 alt-a or latest and additional requirement, top & bottom cable entry holes & earthing lugs shall be provided as per icf drg.no icf/sk3-7-2-082 alt-nil or latest. 2. drg.no.ls71103 alt-a anx-1&2 shall be followed for door stopper arrangement and stiffener in hv panel. 3. drg.no.sked-646 icf anx-2 shall be followed for hv panel lh & rh side holes, wsp mounting holes & provision of poly-carbonate sheet. 4. the rbc cum ebc mcb's and its indications shall be provided in the hv & lv panels as per rdso modification sheet no. rdso/pe/ms/ac/0094-2024 (rev 0) and rdso/pe/ms/ac/0095-2024 (rev 0). 5. provision of individual mpcb for water pump & mounting provision of its controller shall be provided as per the rdso modification sheet no. rdso/pe/ms/tl/0090-2023 (rev-0). 6. packing instruction: pi-115 ver 3.0. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45392875

02 Jun, 2026 NA

Mysore - Karnataka

Tender For supply of fire retardant pvc covering for cable protection with worm clip suitable for lv coupler of garib rath coaches as per s. lnternationals part no. si/sa/4a and rcf spec no. rcf/el/ac/57 (rev.-a) corr-l,2 & 3, amendment no. 1 & 2 or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45365822

19 Jun, 2026 39.99 Lacs

Bikaner - Rajasthan

Tender For repair to security lights panels dg sets fire alarm ups with covered items at af stn bikaner under ge (af) nal - excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5m depth, getting out the excavated earth, forming bottom surfaces to required gradient complete all as specified and directed by engineer-in-charge., removal of excavated material soils to a distance n exc 50 m and depositing where directed at a level not exceeding 1.5m above the startly point complete all as specified and directed., returning filling in, including spreading, levelling watering and well ramming in layers n exc 25 cm as in any type of soil complete all as specified and directed., material and labour for sand cushioning using dry and clean tibba sand in two layers, first layers of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable in trenches/ducts including consolidation of each layers complete all as specified and directed. note : punned thickness shall be measured for payment., material and labour for un-reinforced pre-cast concrete cable covers, class lv type-1, flat size 250mm x 150mm x 40mm thick complete all as specified and directed., taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 2 core, 6 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 2 core, 10 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 4 core, 16 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 3.5 core, 25 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 3.5 core, 35 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 3.5 core, 50 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 2 core 6 sqmm laid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by engineer-in-charge , supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 2 core 10 sqmm laid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by engineer-in-charge, supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 4 core 16 sqmmlaid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by engineer-in-charge, supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 3.5 core 25 sqmm laid in trenches/duct/pipe inc

Central Government/Public Sector

CTN :45375193

20 Jun, 2026 NA

Khadki - Maharashtra

Tender For maint and repair of street lights security lights and solar lights and its connected items including repair to lt distribution network at mh and 41 arty div under ge mh and rh khadki - taking down old unserviceable lt ug cables of size upto 50 sq mm from trenches / poles / ducts etc complete all as specified and directed., supplying, laying, jointing, commissioning and testing xlpe insulated screened pvc bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade confirming to is-7098 (part-i-1988) laid in trenches/ducts/wall / floor / pipes/ poles including cable glands and aluminium lugs of appropriate size, pvc sleeve etc complete all as directed by engr in -charge for following sizes . make :- polycab/havells / gloster / finolex note :- earth work , bricks , riddled earth , gi pipe for protection of cable will be measured & paid under relevant items of schdule . , 50 sq mm 3.5 core ., 35 sq mm 3.5 core, 25 sq mm 3.5 core, 16 sq mm 4 core., 10 sq mm 2 core, 6 sq mm 2 core, excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed., ditto item no 3 but in hard/dense soil., removing excavated material soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed, returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed., material and labour for riddled earth for cushioning to under ground electric cable including spreading , levelling and hand punning complete all as directed. note - punned thickness shall only be measured & paid ., material and labour for road cutting/foot path and making good with pcc 1:3:6 type c-2 ( using 40 mm graded stone aggregate ) of 150 mm depth complete all as specified and directed., supply and laying un-reinforced precast concrete cable cover lv, type i, flat, size 250mm x 150mm x 40mm for under ground cable all as specified and directed., supply and laying gi tubes light grade, galvanized, 40 mm bore in repair ,laid in trenches or under floor or fixed with poles/walls for protection of electric cable all as directed, ditto item no -10 but 80 mm bore., material and labour for plain cement concrete (pcc) 1:3:6 type c2 using 40mm graded stone aggregate for making foundation of pole/stay assembly complete all as specified and directed., material and labour for plain cement concrete (pcc) 1:3:6 type c1 using 20mm graded stone aggregate for making copings of poles etc complete all as specified and directed. ., material and labour for earthing complete with galvanised steel earth plate eletrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level, connected to the earth lead wire 4.0 mm dia (gi wire) size, by means of bolts, nuts, check buts and washers of galvanised iron, earth lead wire 4.0 mm dia protected by provision of gi medium grade pipe 15 mm bore including provision of 40 mm thick cover of rcc (1:2:4) 20mm graded stone aggregate re-inforced with xpm (weight not less than 4 kg per sqm) and frame of angle iron 40x40x3 mm with lugs 02 nos and with 6 mm dia ms bar handle made to shape, gi light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edged of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning filling in distance not exe 50 mtr and removal of surplas soil to plate no 3 of ssr 2009 part-i and connecting to earth test point all as specified or indicated including testing on completion complete all as specified and directed. , material and labour fo

Clutch Wire Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors