Latest co2 cartridge scrap Tenders | Government co2 cartridge scrap Tenders

Central Government/Public Sector

CTN :45391086

18 Jun, 2026 NA

Ratlam - Madhya Pradesh

Tender For supply of refilling of n2 gas cylinder with capacity 50 l, 200 bar+/-10% in pantry & power cars as per attached specification & scope of work. note- refilling to be done from petroleum & explosive safety organization (peso) accredited refiller. [ warranty period: 30 months after the date of delivery ] ]

CTN :45370303

09 Jun, 2026 NA

Kamrup - Assam

Tender For supply of carbon dioxide co2 gas for cylinder , nitrous oxide n2o gas for cylinder , oxygen o2 gas for cylinder , nitrogen n2 gas for cylinder , liquid nitrogen

CTN :45351104

06 Jun, 2026 NA

Ri Bhoi - Meghalaya

Tender For supply of dgeme cash grant items e e - wc 1.8ltr peso certified n2 gas cylinder , cylinder outlet valve no20 connection , 6mm pu pipe , n2 gas cylinder pressure control regulator , fine pressure selection cum pressure safety device

State Government

CTN :45353021

18 Jun, 2026 NA

Kheda - Gujarat

Tender For supply of industrial oxygen (o2), dissolved acetylene (da) and nitrogen (n2) gas in cylinders at wanakbori t.p.s.

Central Government/Public Sector

CTN :45263257

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply of uhv deposition chamber - uhv chamber specification (vacuum better than 2 10-9 mbar uhv) chamber overview spherical (diameter 14 ) or equivalent square shaped uhv chamber with support frame equipped with three (3) x 2-inch magnetron sputtering sources. all cf flanges and uhv viewports/ss blanks, three (3) x 2-inch magnetron sputtering sources. each sputtering source has an individual gas inlet line for process gases. all cf flanges., substrate holder : diameter: 2 inches; heating molybdenum heater capable of heating substrate (a) from room temperature (rt) to 800 c during rotation and (b) from room temperature to 1000 c without rotation. rotation: substrate holder can rotate continuously, driven by a stepper motor. variable speed from 0 to 10 rpmmovement: up / down vertical movement of total 25mm to adjust substrate position during deposition sputtering geometry: one sputtering source mounted parallel to the substrate surface, tilt adjustable. two sputtering sources mounted confocally at an angle relative to the substrate. base pressure: lower than 2 10 mbar (ultra-high vacuum)., vacuum pumping system: turbo molecular pump: pfeiffer hipace300 / edwards next 300 / leybold turbovac 350i with cf100 flange or equivalent with integrated controller, ion pump with controller: included to maintain uhv vacuum levels and provide clean pumping., backing pump: pfeiffer hiscroll 12 / edwards nxds 15i / leybold scroll vac 15 plus or equivalent dry scroll pump used to back tmp, gate valves : one cf100 and one cf150 manual gate valves for isolating the chamber from the pumping systems as well as throttling, vacuum gauges and measurement: one cold cathode gauge with readout capable of measuring vacuum pressures down to1 10-10 mbar for precise uhv monitoring., one capacitance manometer gauge with measurement range from 1 10-1 to 1 10 mbar for accurate pressure reading during deposition phase, gas delivery system: two independent mass flow controllers (mfcs):a. one mfc (0-100 sccm) for argon gas feeding to all three sputtering sources via high vacuum valves.b. one mfc (0-100 sccm) for nitrogen gas feeding directly into the chamber with its own high vacuum valve.gas lines for ar and n2 are physically separated to avoid cross-contamination., chamber access and viewports: 1. two view ports installed on the chamber, each equipped with manual shutters. 2. access ports for gauges, pump, gas inlet and few spares for future upgradation., baking capability: entire chamber designed to bake-out at 150 c to reduce contamination and out gassing during operation, cooling capability : water manifold with flow switch / flow meters, near uhv chamber specification: chamber overview: spherical (diameter 14 ) or equivalent square shaped uhv chamber with stand., three 2-inch magnetron sputtering sources, each with individual gas inlet. all cf flanges and uhv viewports/ss blanks., substrate holder: a. diameter: 2inches; heating : molybdenum heater capable of heating substrate (a) from room temperature (rt) to 800 c during rotation and (b) from room temperature (rt) to 1000 c without rotation b. rotation : substrate holder driven by stepper motor. variable speed from 0 to10 rpmmovement: up / down vertical movement of total 25mm to adjust substrate position during deposition sputtering geometry: one sputtering source mounted parallel to substrate surface (tilt able preferred). two sputtering sources mounted confocally at an angle. base pressure : lower than 5 10 mbar (near uhv)., vacuum pumping system: turbo molecular pump : pfeiffer hipace 700 / edwards next 730 / leybold turbo vac 900 ix or equivalent with cf100 flange and integrated controller, suitable for near uhv vacuum., backing pump: pfeiffer hi scroll 12/edwards nxds15i / leybold scroll vac 15 plus or equivalent dry scroll pump used to back tmp, gate valves: one cf150 manual gate valve to isolate / throttle chamber from pumping system, vacuum gauges and measurement: cold cathode readout capable of dis

Central Government/Public Sector

CTN :45313720

30 May, 2026 1.10 Lacs

Kanhan - Maharashtra

Tender For supply of spares for hemm - o-ring , tube , lmt & quick rel. valve , butterfly valve , tee connector , elbow , repair kit , mount rubber , tran. oil temp gauge , trans. oil pressure gauge , air horn , pin , cyl compressed gas n2 (p. no. 4600001177)

Central Government / Public Sector

CTN :45084702

02 Jun, 2026 3.90 Lacs

Hyderabad-T - Telangana

Tender For corrigendum : sitc co2 and n2 gas pipeline system along with accessories as per bid - high-pressu seamle ste c g cylind filled , high-pressur seamles stee n2 nitrogen ga cylinde filled , co2 changeove hig pressur automati mechanical , n2 changeove hig pressur automati mechanical , gas distributio panel fo 1 outlets , ss tubin pipeline , p u tubing m od , fittings , support casin includin pv casing capping , testin and commissioning

CTN :45331521

05 Jun, 2026 NA

Delhi - Delhi

Tender For providing of custom bid for services - refillin of nitrogen gas (n2) of 2 cylinder

CTN :45302926

13 Jun, 2026 5.00 Lacs

Kolkata - West Bengal

Tender For supply of co2 gas , ar gas , n2 gas , refililing charges of pure co2 per kg , refilling charges of pure n2 per kg price , refilling charges of pure ar per kg price , per trip cost for minimum 10 cylinder per trip.

Central Government/Public Sector

CTN :45292060

12 Jun, 2026 NA

Nashik - Maharashtra

Tender For supply of points for first year , calibration of glueing m c 8930 by 3 sensor 3 cal points for first year , calibration of vul kettle 8760 by 3 sensor 3 cal points for first year , calibration of hot swaging m c plant no 6229 by 1 sensor 3 cal points for first year , calibration of salt peter n 5 by 3 sensor 3 cal points for first year , calibration of temp gauge by 1 sensor 3 cal points for first year , calibration of gas nitric 35 by 1 sensor 3 cal points for first year , calibration of air circulation by 3 sensor 3 cal pointsfor first year , calibration of high frequency 41 by 1 sensor 3 cal points for first year , calibration of digital graph recorder 1 16 ch without sensor by simulatrion 3 cal points for first year , calibration of hot swill n2 by 1 sensor 3 cal points for first year , calibration of anodising e6 by 1 sensor 1 cal points for first year , calibration of auto film proce 6768 by 1 sensor 3 cal points for first year , calibration of hot air blower 70 by 3 sensor 3 cal points for first year , calibration of hot water anodizing 20 by 1 sensor 3 cal points for first year , calibration of temp control of hot water 02 by 1 sensor 3 cal points for first year , calibration of digital temp. gauge with rtd sensor by 1 sensor 3 cal points for first year , calibration of tvc trolly by 3 sensor 3 cal points for first year , calibration of industrial freezer by 1 sensor 3 cal points for first year , calibration of industrial freezer 2019-14 by 1 sensor 3 cal points for first year , calibration of thermo lab 3c36 and 2c temp and rh measurement by 1 sensor 3 cal points for first year , calibration of oscilation disc rpm measurment for first year , calibration of grese drop point tester 538 1110 by 1 sensor 3 cal points for first year , calibration of quv by 1 sensor 3 cal points for first year , calibration of hot air dryer d1 and d2 by 1 sensor 3 cal points for first year , calibration of hot water cleaning station by 1 sensor 3 cal points for first year , calibration of temp clock for first year , calibration of ir gun up to 500 dec c for first year , calibration of furnace range upto 500 deg c by 1 sensor 3 cal points for second year , calibration of furnace range upto 500 deg c by 3 sensor 3 cal points for second year , calibration of furnace range upto 1250 deg c by 1 sensor 3 cal points for second year , calibration of furnace range upto 1250 deg c by 3 sensor 3 cal points for second year , calibration of furnace range upto 1250 deg c by 6 sensor 3 cal points for second year , calibration of bath range upto 400 deg c by 1 sensor 3 cal points for second year , calibration of bath range upto 400 deg c by 3 sensor 3 cal points for second year , calibration of bath range upto 400 deg c by 6 sensor 3 cal points for second year , calibration of thermometer range upto 100 deg c 3 cal points for second year , calibration of tank range by 1 sensor 3 cal points for second year , calibration of tank range by 3 sensor 3 cal points for second year , calibration of oven range upto 350 deg c by 1 sensor 3 cal points for second year , calibration of oven range upto 350 deg c by 3 sensor 3 cal points for second year , calibration of oven range upto 350 deg c by 6 sensor 3 cal points for second year , calibration of themohygrometer 3 cal points for second year , calibration of hydraulic press range upto 180 deg c by 1 sensor 3 cal points for second year , calibration of hydraulic press range upto 180 deg c by 3 sensor 3 cal points for second year , calibration of chambers furnace range upto 200 deg c by 1 sensor 3 cal points for second year , calibration of chambers furnace range upto 200 deg c by 3 sensor 3 cal points for second year , calibration of //bid details 2 / 81 chambers furnace range upto 200 deg c by 6 sensor 3 cal points for second year , calibration of auto film proce 6760 by 1 sensor 3 cal points for second year , calibration of extrasion mc 6580 by 1 sensor 3 cal points for second year , calibration of spot vulcanising

Co2 Cartridge Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector