Latest coating compound Tenders | Government coating compound Tenders

Central Government/Public Sector

CTN :40122092

07 May, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of enamel synthetic exterior under coating pale cream spec.is:8662/2004 (second rev.) a nd rdso amendment no.1 (rev. 0) for pigment content as an additional requirement to is 8662/2004 w.e.f 1.8.2016 with additional requirement of icf/md/md/spec.-045, issue status -02, rev- no. 03, dt.1 4.6.2007 isc:352 with rdso amendment no.1a with fire retardant properties as per rdso spec. m & c/pcn/120-2011(rev.-1) dated feb'2011. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ]

Central Government/Public Sector

CTN :40107024

23 May, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of finishing anti-tracking varnish class 'h' for winding coating of auxiliary machines in capacity of con tainer 500ml and should be applied by spraying over winding with dielectric strength 60 v/micron and comparati ve tracking index (50 drops)>200 volts. item should be as per clw spec no. 4tms.092.106 alt-2 dated 10.02.19 92 and should pass the test as per is-10026-1982. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40084185

15 May, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply and application of 3 part composite high voltage insulated coating compound "electrobann" on bottom of rob, suitable for 25 kv ac traction as per specification on 1 meter area on either side of catenary wire with average coating thickness of 3.0 mm.

CTN :40090919

13 May, 2025 NA

Bidar - Karnataka

Tender For supply of publicity items - executive notebook with skat watermark on each page , official sqn print with grame a4 size with wooden frame and matte lamination , photo frames large size 2x3 ft with wooden frame and matte lamination , skat brouchers , skat postcard , skat pamphlets , skat drawing book , sqn memento with wooden frame with metal work , coffee mugs with skat logo , 3d aircraft shape fridge magnets , card board aircraft puzzle coloured , skat car stickers , click type ball pen with skat logo , metal key chain with embossed team logo , skat kids styrofoam rubber frisbee , wooden leather material pen stand with embossed skat logo , executive fountain pen with embossed skat logo , lapel pin 3d with embossed skat logo , skat jute bag medium with skat printed logo and inside plastic coating , skat paper bags medium with skat printed logo and with golden finish , stationery pouch with small stationery items like pencil, eraser, sharpener with custom skakt design on each item , small crayon set with customised cover , skat customised tie set with box , skat customised bookmarks bid number/ & ( * ) : gem/2025/b/6141993 dated/ + : 22-04-2025 bid document/ 2 2 1 / 23

CTN :40065916

08 May, 2025 NA

East Godavari - Andhra Pradesh

Tender For supply of material code: 0871959493 filler mastic roll item specification as per technical specification sheet , material code: 0871959363 perp roll item specification as per technical specification sheet , material code: 0871959543 two part high-build liquid epoxy coating system item specification as per , material code: 8601079213 primer item specification as per technical specification sheet

CTN :40045676

08 May, 2025 10.00 Crore

Jodhpur - Rajasthan

Tender For 01(2025-26) item no. 01 cardiothoracic equipments and implants - titanium ligaclips small with small diamond shape pyramidal heads, similar to needle holder inserts, ensuring a firm multi-directional atraumatic grip. interlocking atraumatic teeth designed for non-slip closure on the vessels. triangular shape of the titanium wire for the precision of the positioning of the clip into the jaws of the applier. should be us fda approved., titanium ligaclips medium with small diamond shape pyramidal heads, similar to needle holder inserts, ensuring a firm multi-directional atraumatic grip. interlocking atraumatic teeth designed for non-slip closure on the vessels. triangular shape of the titanium wire for the precision of the positioning of the clip into the jaws of the applier. should be us fda approved., titanium ligaclips large with small diamond shape pyramidal heads, similar to needle holder inserts, ensuring a firm multi-directional atraumatic grip. interlocking atraumatic teeth designed for non-slip closure on the vessels. triangular shape of the titanium wire for the precision of the positioning of the clip into the jaws of the applier. should be us fda approved., proximal aortic anastomosis device. it should provide stable blood field. it allows for up to three anastomosis from one insertion. size 3.5mm/4.0mm/4.5mm, membrane oxygenator (plasma resistant) with integrated arterial filter. should have surface area with surface area of 1.4 m2. it should have radial blood flows design to give efficient gas transfer. it should have quick priming inlet and vacuum assisted venous drainage. oxygenator should have self-venting facility. integrated arterial filter should be polyester/polycarbonate/equivalent material. integrated arterial filter pore size should be less than 40 micron with the surface area of around 60-80cm2. priming volume of around of less than 285ml visible path top to bottom should have maximum flow for large body surface area patient ranging from 0.5 to 6 l/m. should have phosphoryl choline (pc) coating like phisio. should be able to operate at venous reservoir level of minimum 150 ml. oxygenator reservoir should have polycarbonate/polyester/equivalent screen type venous filter with pore size less than 50 micron. should be us fda approved. should be supplied with appropriate stand., uw solution for organ transplant use., dacron graft knitted bioseal grafts diameter 6mm to 8mm length 30 cm, dacron grafts knitted bioseal diameter 6mm to 8mm length 60 cm, dacron grafts woven bioseal diameter 20mm to 32mm length 30 cm, aortobifemoral bioseal graft dacron sizes - 6x12x45 / 7x14x45 / 8x16x45, coronary osteal cannula10fr/12fr/14fr, intra cardiac sump20fr/12fr, eptfe grafts plain straight diameter 6mm/7mm/8mm length 20 cm us fda approved, eptfe grafts plain straight diameter 6mm/7mm/8mm length 40 cm us fda approved, eptfe grafts plain straight diameter 6mm/7mm/8mm length 50 cm us fda approved, eptfe grafts plain straight diameter 6mm/7mm/8mm length 60 cm us fda approved, eptfe grafts plain straight diameter 6mm/7mm/8mm length 70 cm us fda approved, eptfe grafts plain straight diameter 6mm/7mm/8mm length 100 cm us fda approved, eptfe grafts plain straight diameter 6mm/7mm/8mm length 75 cm us fda approved, eptfe grafts ring reinforced diameter 6mm/7mm/8mm length 20 cm us fda approved, eptfe grafts ring reinforced diameter 6mm/7mm/8mm length 40 cm us fda approved, eptfe grafts ring reinforced diameter 6mm/7mm/8mm length 50 cm us fda approved, eptfe grafts ring reinforced diameter 6mm/7mm/8mm length 60 cm us fda approved, eptfe grafts ring reinforced diameter 6mm/7mm/8mm length 70 cm us fda approved, eptfe grafts ring reinforced diameter 6mm/7mm/8mm length 75 cm us fda approved, eptfe grafts ring reinforced diameter 6mm/7mm/8mm length 100 cm us fda approved, iodine impregnated incision drape, size 55cm x 45 cm (ahesive area). should be gamma sterilize. should be polyurethane adhesive coated surgical film with povidone iodine.

Central Government And Public Sector

CTN :40081324

30 Apr, 2025 NA

Bongaigaon - Assam

Tender For supply of hex head bolt m16x70 high tensile. materials and specification as per is:1364 (part -1)- 2002, ce with property class 10.9 to is: 1367 (part -3)-2002 coating as per mdts-057make:-tvs/tuff/dfl/unbrako and all approved vendors for axle end steel high tensile cap screws to be used in end holes of bg freight axles ( item id-3100249, sub item id 3100249002 or 3100249003) borne in the rdso approved vendor list available on uvam portal.

Central Government/Public Sector

CTN :40054594

30 Apr, 2025 NA

Haridwar - Uttarakhand

Tender For only teflon coating of dabg item

CTN :40060991

28 Apr, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of set of spring washers for fiat bogie consisting of 03 items. item no.1 spring wahser b12 (36 nos.). item no.2. spring wahser b16 (16 nos.). item no.3. spring washer b20 (16 nos.), coating as per mdts-057 to is:3063/1994 with amndt. no. 1, grade 60c6.

Central Government/Public Sector

CTN :40060873

15 May, 2025 NA

Multi City - Multi State

Tender For supply of set consisting of 1) frame for stacking ramp as per drg. no. rdso/cg/drg/21013, qty.: rh-01 no. & lh - 01 no.2) ramp assembly for side entry door as per drg. no. rdso/cg/drg/21052, qty.: - 02 nos.item to be supplied with red oxide zinc chromate primer coating.

	Apr 2025
Su	Mo	Tu	We	Th	Fr	Sa
30	31	1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	1	2	3
4	5	6	7	8	9	10

	Mar 2025
Su	Mo	Tu	We	Th	Fr	Sa
23	24	25	26	27	28	1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31	1	2	3	4	5

	Apr 2025
Su	Mo	Tu	We	Th	Fr	Sa
30	31	1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	1	2	3
4	5	6	7	8	9	10

	Mar 2025
Su	Mo	Tu	We	Th	Fr	Sa
23	24	25	26	27	28	1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31	1	2	3	4	5

Coating Compound Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector