Get complete information related to latest Coating Compound Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Coating Compound Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Coating Compound Tenders.
Tender For supply of cut resistant hand gloves with nitrile butadine rubber (nbr) palm coating made with a blen d of hppe & glass fibre certified with specification standard en 388: 2016 - 4543d , ultra light , palm coated knit wrist , optimum grip in wet and dry environment for standard palm size 8,9 in ratio of 1:2 respectively. [ warranty period: 30 months after the date of delivery ]
Tender For supply of gss sheet metal ducting , double layer canvas connection , supply air grills with aluminium volume control damper , aluminum conductor armoured cable , copper conductor armoured cable , plumbing work for drainage requirement , powder coating m.s. cable trays , wall opening , dismantling and removing the existing laid old power or control cables , dismantling or removing the existing fitted old package a.c. units , recovering the existing laid refrigerant piping of old hot gas and cold gas , dismantling the existing fitted old ms racks , dismantling or removing the old condensate drain piping , dismantling the existing old ducts of package units , dismentalling of lt panel from ac plant room , transportation of the existing fitted old dissmantled package a.c. units , itc of 7tr hpac package , supplying and charging of the refrigerant gas , copper referigerant piping , laying of recovered copper referigerant piping , providing ms structure , itc of following old recovered items , providing and fixing 25 mm x 5 mm g.i. strip , 06 mm thick rubber matting , liquid line filter drier , installation testing commissioning of existing electrical lt panel , end termination with brass compression gland and aluminium lugs , aluminium conductor power cable of 1.1 kv grade
Tender For purchase of materials for repairs to 25hp vertical turbine pumpset intake well centrifugal pumpset 40hp at wtp in manuguru municipality (reserved for sc societies/ individuals) - supply and delivery of centrifugally cast (spun) ductile iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to is: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification k9 with cement mortar lining inside the pipes with outside zinc coating. rates are ex-factory, excluding transportation & taxes. 2m length for intake well pumpset iii, manufacture, supply and delivery of ss shaft of 42mm suitable for pumpset including threading, finishing and foundary works etc complete for intake well pumpset. , manufacture, supply and delivery of stainless steel (ss 304 grade) impeller suitable for 25hp vt pumpset, manufacture, supply and delivery of pumpset new body diset aluminium mould for pumpset with wooden support, manufacture, supply and delivery of pumpset body mould metal of cast iron suitable for 25hp vt pumpset including all machinery charges, manufacture, supply and delivery of ss line shaft including threading, finishing and foundary works etc complete , manufacture, supply and delivery of brass bushes for impeller including all finishing and foundary works etc complete , alignment of existing 25.4 line shafts using dual indicator on balancing machine including all machinery charges., manufacture, supply , delivery and fixing of rubber bushes for impeller for intake well pumpset , manufacture, supply , delivery and fixing of rubber bushes for spiders , supply and delivery of m.s bolts & nuts with double washers excluding all taxes (1/2" to 1"), supply, delivery and fixing of mccbs 250 du for transformer at intake well, supply, delivery and fixing of mccbs 100 du at wtp, supply, delivery of ss shaft 40" for 40hp at wtp, supply, delivery of bearings (6319) for 40hp pumpset at wtp, supply, delivery of impeller brass bushes for 40hp pumpset at wtp, supply, delivery of 6mm packing sheet, supply, delivery of hoarings for 40hp pumpset at wtp, supply, delivery of ss nuts and bolts for pumpset at wtp, supply, delivery of nuts and bolts for couplers at wtp, supply, delivery of couplings sets, supply, delivery of ltlk starter to vaccum motor, supply, delivery of air blower regulator oil
Tender For diagnostic and therapeutic items for cardiac cath lab (group b) - manifold with two side ports for ptca (fda/ce approved), manifold with three side ports for ptca (fda/ce approved), teflon coated guide wires (j-tip & straight-tip) standard length-145 or 150cm (fda/ce approved), teflon coated guidewires(j-tips & straight-tip) exchange length-260 or 300cm (fda/ce approved), femoral introducer sheath with puncture needle for adults (sizes 5 - 11 fr.) standard length; 10-16-25 cm long; 0.021 or 0.025-inch guide wire compatible. material of sheath tubing should be made of etfe, cross cut valve should be made up of silicon rubber & should have silicone coating. dilator tube should be made up of polypropylene and should have silicon coating. must have with haemostatic crosscut valve; with integrated side arm with attached 3-way stopcock; with suture eye for securing sheath and click sound; kink resistant. must have with dilator-hub lock mechanism to prevent its back-out during insertion; pack must include with or without metallic needle usfda approved, long introducer sheath (20-50cm long) (fda/ce approved), extra-long introducer sheath (>50 cm) (fda/ce approved), radial introducer kit with puncture needle for adults (sizes 5 - 7 fr.) standard length 7 cm long; 0.035 or 0.038-inch guide wire compatible, include surflash 20g*2 entry needle (plastic iv catheter) and 0.025 mini plastic guidewire must have etfe sheath tubing, dilator tube should be made up of polypropylene and should have silicon coating.should contain a haemostatic crosscut valve to prevent back leak of blood and aspiration of air; with integrated side arm with attached 3-way stopcock., trans radial coronary diagnostic catheter (us fda approved) of various lengths, syringe for pressure injector-150ml with pressure tubing compatible with the available system in the cath lab(medred-mark-7) arterion, high pressure connecting tubing up to 50 cms long for pressure syringe, a). coronary diagnostic angiography catheter(judkins type- left and right) (us fda, b). coronary diagnostic angiography catheters ( judkins type) europeance approved), a). diagnostic coronary angiography catheter(amplatz type- left and right) (us fda), b). diagnostic coronary angiographic catheter ( amplaz type left & righce approved), pigtail catheters (fda/ce approved), short pigtail for pericardiocentesis, diagnostic multipurpose catheters (fda/ce approved), nih catheter (fda/ce approved), ima catheter (fda/ce approved), ptca inflation device-analog display (balloon inflationdevice analog display, 30 atm pressure with tubing and 3way stopcock) (fda/ce approved), y-connector set with extension tubing tuohy burst, pci,needle and 3-way, special y-connector set with both fixed and haemostaticvalve with upto 10 fr inner diameter, pci needle with/without torquer device, disposable plastic sterile luer lock syringer for angiography and ptca (leur lock), large lumen ptca guiding catheters of 5 to 8 fr sizes-fda approved, large lumen ptca guiding catheters of 5 to 8 fr sizes-ce approved, brk needle (fda/ce approved) for paediatrics/adults, embolic protection (distal protection) device (epd) for ptca (fda approved), embolic protection (distal protection) device (epd) for ptca (ce approved), manual thrombosuction catheter for ptca (fda approved), manual thrombosuction catheter for ptca (ce approved), radial artery compression device, cross over arterial sheaths(fda approved), snare loop (fda approved), snare loop (ce approved), micro grabber (fda approved), micro grabber(ce approved), intra vascular retriever snare of various sizes with single foldable loop, intra vascular retriever snare-two loops (gooseneck type), intra vascular retriever snare-three or more loops (gooseneck type), pericardiocentesis kit (fda/ce approved), pigtail catheter with multiple markers (fda approved), rotalink plus system, rotalink pro system, rotalink guidewire, intracoronary pressure wire (ffr) for ptca-compatible with
Tender For supply of training aids for uac and amar training facility e e - knife rubber coating , knife wooden , pistol rubber coated , rifle rubber coated , chest guard , helmet , knee pad , elbow pad , thigh pad , martial arts dummy , judo mat , punching kit bag
Tender For supply of bellows set consisting of 1 no. of supply air below, 2 nos of fresh bel lows and 2 nos of return air bellow ducts made of meta aramid / para aramid fabric with si licone rubber coating on both sides for lhb eog /hog type ac coaches as per rdso specifica tion no. rdso / pe / spec / ac / 0197 -2020. scope of the supply as per clause no. 2 of the above specification. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : diagnostic and therapeutic items for cardiac cath lab (group b) - ecgelectrodesofhighqualitymaterialtominimize interference and signal distortion during prolonged cardiology procedurest (fda/ce approved), manifoldwithtwosideportsforptca(fda/ce approved), manifoldwiththreesideportsforptca(fda/ce approved), tefloncoatedguidewires(j-tip&straight-tip)standard length-145 or 150cm (fda/ce approved), tefloncoatedguidewires(j-tips&straight-tip)exchange length-260 or 300cm (fda/ce approved), femoral introducer sheath with puncture needle for adults (sizes 5 - 11 fr.) standard length; 10-16-25 cm long; 0.021 or 0.025-inch guide wire compatible. material of sheath tubing should be made of etfe, cross cut valve should be made up of silicon rubber & should have silicone coating. dilator tube should be made up of polypropylene and should have silicon coating. must have with haemostatic crosscut valve; with integrated side arm with attached 3-way stopcock; with suture eye for securing sheath and click sound; kink resistant. must have with dilator-hub lock mechanism to prevent its back-out during insertion; pack must include with or without metallic needle usfda approved, longintroducersheath(20-50cmlong)(fda/ce approved), extra-longintroducersheath(>50cm)(fda/ceapproved), radial introducer kit with puncture needle for adults (sizes 5 - 7 fr.) standard length 7 cm long; 0.035 or 0.038-inch guide wire compatible, include surflash 20g*2 entry needle (plastic iv catheter) and 0.025 mini plastic guidewire must have etfe sheath tubing, dilator tube should be made up of polypropylene and should have silicon coating.should contain a haemostatic crosscut valve to prevent back leak of blood and aspiration of air; with integrated side arm with attached 3-way stopcock, transradialcoronarydiagnosticcatheter (us fda approved) of various lengths, syringeforpressureinjector-150mlwithpressuretubing compatiblewiththeavailablesysteminthecathlab(medred-mark-7)arterion, highpressureconnectingtubingupto50cmslong for pressuresyringe, a). coronarydiagnosticangiographycatheter(judkinstype- leftandright)(us fda, b). coronary diagnostic angiography catheters ( judkins type) europeanceapproved), a). diagnosticcoronaryangiographycatheter(amplatztype- leftandright)(us fda), b). diagnostic coronary angiographic catheter ( amplaz type left &righceapproved), pigtailcatheters(fda/ceapproved), shortpigtailforpericardiocentesis, diagnosticmultipurposecatheters(fda/ceapproved), nihcatheter(fda/ceapproved), imacatheter(fda/ceapproved), ptcainflationdevice-analogdisplay(ballooninflation, deviceanalogdisplay,30atmpressurewithtubingand3, waystopcock)(fda/ceapproved), y-connectorsetwithextensiontubingtuohyburst,pci, needleand3-way, specialy-connectorsetwithbothfixedandhaemostatic, valvewithupto10frinnerdiameter, pcineedlewith/withouttorquerdevice, disposableplasticsterileluerlocksyringerfor angiographyandptca(leurlock), largelumenptcaguidingcathetersof5to8fr sizes-fda approved, largelumenptcaguidingcathetersof5to8fr sizes-ce approved, brkneedle(fda/ceapproved)for paediatrics/adults, embolicprotection(distalprotection)device(epd)for ptca (fda approved), embolicprotection(distalprotection)device(epd)for ptca (ce approved), manualthrombosuctioncatheterforptca(fda approved), manualthrombosuctioncatheterforptca(ceapproved), radialarterycompressiondevice, crossoverarterialsheaths(fdaapproved), snareloop(fdaapproved), snareloop(ce approved), micrograbber(fda approved), micrograbber(ceapproved), intravascularretrieversnareofvarioussizeswithsingle foldable loop, intravascularretrieversnare-twoloops(gooseneck type), intravascularretrieversnare-threeormoreloops (gooseneck type), pericardiocentesiskit(fda/ceapproved), pigtailcatheterwithmultiplemarkers(fdaapproved), rotalinkplussystem, rotalinkprosystem, rotalinkguidewire, intracoronarypressurewire(ffr)forptca-compatible with abbott vascular, ivuscatheterforcoronaryinterventionscompatiblewith boston scientific vasc
Tender For corrigendum : supply of ht motors spares for emd-1,wtps,gsecl. - skf make induction heater model no. tih 100m / 230v for bearing fitting work., hydraulic jack with pump & accesories capacity: 100 mt., hydraulic jack with pump & accesories capacity: 50 mt., greasing pipe for ht motors - r1 type hydraulic hose pipe ( rubber hose with single inner wire braiding), araldite 180 gram/tube, red insulating varnish-class f epoxy insulation & protection coating., dr. back make backtol red in 1 lit. tin varnish, digital multimeter 4.1/2 digit (true rms), digital clamp on meter lcd display with backlight, 3-3/4 digit., digital megger (insulation tester) dual voltage 500/1000 v 0 to 2000 megaohms resolution of 1 m? weght: 500 gm approx., analog multi range insulation tester.hand driven type,voltage range-250v/500v/1000v., brass connectors for pstb of ht motor, plastic dori (sutari) for binding of plastic ,0.5 thick &2mm width., insulating cable gland for pstb of ht motor, grease gun, fevicol sr 998 (200 ml/tin), self fusing rubber tape black , class b , 31 kv die electric strength , size 2.5 cm x 10 mtr., pvc tap roll, insulating box for pstb for ht motor, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink:50 mmdia. after shrink :20 mm, heat shrinkable sleeve,size:45mm/18 mm( for 240/300 sq.mm )for 11 kv, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink: 75 mm dia. after shrink : 28 mm for 11 kv ht cable, z 801 fast steel epoxy stick (1 stick - 114 grm), impact wrench power/battery operated, cordless screw driver power/battery operated, w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, w963 play safe high voltage tape (25 mm x 0.76 mm x 9.1 mtr) roll, becktol gray varnish in 1 ltr tin dr.back make, electical saftey equipment tester taparia product no:814 voltage range:110v to 230v