Latest collision protector Tenders | Government collision protector Tenders

Central Government And Public Sector

CTN :40534045

06 Jun, 2025 NA

Mandi - Himachal Pradesh

Tender For construction of foundation for 40m nblw tower at hadsar including dismantling of 40 mtr nblw tower at chatrokhari and its erection at hadsar distt mandi hp

CTN :40267906

03 Jun, 2025 NA

Chamoli - Uttarakhand

Tender For corrigendum : supply of fabrication and supply of complete structure of svl tower 12 mtr including all necessary fittings fixtures alongwith foundation bolt base plate as per ts , portable inverter generator with 5.5 kva rated output and 7 kva , lifting beam alongwith lifting hook for minimum lifting capacity 300kg , toughened glass16mm to protect the camera , ms plate for landing at the top of the tower 10mm thick , galvalume sheet of size 6 ft x 1 mtr , pvc conduit pipe 40mm dia , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 1989 , sand coarse confirming to is-383-9702 as per ts , crushed stone aggregate 20 mm graded , crushed stone aggregate 40 mm graded , crushed stone aggregate 40 to 63 mm graded , mild steel bar of size 10mm dia and above conforming to is 432 , mild steel bar of size 6 to 8mm dia conforming to is 432 , quick setting compound , ms binding wire , wooden planks for shuttering iine class wood of size 3.00 x 0.30 x 0.026m , connected store as per final design

Central Government And Public Sector

CTN :40515603

05 Jun, 2025 14.35 Lacs

Alappuzha - Kerala

Tender For erection of 24m roof top tower including transportation from harippad te construction of foundation dg bed equipment room painting earthing etc at edanadu alappuzha

Central Government And Public Sector

CTN :40515604

05 Jun, 2025 12.78 Lacs

Kayamkulam - Kerala

Tender For erection of 24m roof top tower including transportation from kayamkulam te construction of foundation dg bed equipment room painting earthing etc at poomkavu alappuzha

Central Government And Public Sector

CTN :40471418

02 Jun, 2025 93.16 Lacs

Bhubaneswar - Odisha

Tender For construction of 11 no. 40m. nblw ground based tower foundation including diesel generator set platform and ring earth for up gradation of 4g in micro bts sites under phulbani oa

State Government

CTN :40475951

08 Jun, 2025 NA

Delhi - Delhi

Tender For urgent repair of foundation of tower no. 02 of 220kv south of wazirabad - kashmere gate d/c transmission line

CTN :40486146

17 Jun, 2025 72.27 Lacs

Dibrugarh - Assam

Tender For construction of 132 kv d 0 tower (01 no) on pile foundation in place of river eroded tower at loc. no. 136 of 132 kv dibrugarh-tinsukia line including associated works

Central Government And Public Sector

CTN :40486820

11 Jun, 2025 13.99 Lacs

Visakhapatnam - Andhra Pradesh

Tender For construction of 40 m gbt foundation, including dg and odbts plinths, erection of tower in bsnl compound at anandapuram, visakhapatnam (by dismantling existing 40 m gbt including foundations at saripalli)

Central Government And Public Sector

CTN :40501773

02 Jun, 2025 2.40 Lacs

Ahmedabad - Gujarat

Tender For dismantling of amd325- 40 mtr nblw tower with foundation and refilling upto ground level at paldi kankaj, daskroi, ahmedabad

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

Collision Protector Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors