Latest condensing unit Tenders | Government condensing unit Tenders

State Government

CTN :40214819

12 Jun, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ktps-vii stage-tm- procurement of debris filter spares and consumables for 800 mw condenser.

Central Government/Public Sector

CTN :40344499

05 Jun, 2025 NA

Anpara - Uttar Pradesh

Tender For corrigendum : supply of complete air-cooled type packaged air conditioning system (2 nos. condensing unit+ 2 nos. , installation and commissioning of complete air-cooled type packaged air conditioning system

State Government

CTN :40534114

05 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of rubber molded goods - moulded rubber goods, neoprene rubber square suitable to stand temp.200 c for juice heater size 5/8 x 5/8 , rubber square suitable to stand temp.200 c for v. line juice heater size 1/2" x 1/2", nitrile rubber seat for angle valve of juice heater suitable to stand temp.200 c, as per drg no. ksc/bh/296/02, nitrile rubber seat for double beat valve of juice heater size 240mm od x 94mm bore x 18 mm thick, neoprene rubber taper plug for evaporator tubesize: 37mm x 40mm as per drg.no. ksc/286/02, nitrile rubber seat for vapour angle valve (inlet of 4th evaporator body) suitable to stand at 200 c temp. as per drg.no.ksc/evp/97/2001 fig no.1, nitrile rubber seat for main exhaust valve of semi kestner as per our drawing no. ksc/bh/7898 fig. no. 1, nitrile rubber seat for surplus exhaust angle valve of semi kestner suitable to stand at 280 c as per drg. no.ksc/bh/7899 fig no. 3, nitrile rubber seat for outlet vapur valve of s.k. suitable to stand at 280 c as per drg. no. ksc/bh/7899 fig.-1, nitrile rubber seat for angle valve (inlet exhaust valve of v.cell) suitable to stand at 280 c as per drg. no. ksc/bh/8607 fig.-1, nitrile rubber seat for pan exhaust valve to stand at 260 c as per drg.no.ksc/bh/7899 fig no. 2, nitrile rubber seat for exhaust/vapour angle valve for pan no. 1, 3, 8 & 10 as per dr g. no. ksc/boil/221, fig. no. 1, fig. no. 2, fig. no. 3, fig. no. 4, nitrile rubber seat for discharge valve of pan no. 1 to 5 as per drg. no.ksc/bh/8607 fig.-2, nitrile rubber seat for discharge valve of pan no. 6 & 7 as per drg. no.ksc/8608, nitrile rubber seat for discharge valve of pan no. 9 & 10 as per drg. no.ksc/8609, synthetic rubber joint for main hole of pan 3, 4 & 5 size 517 od x 443 bore x 13 thick., synthetic rubber joint for main hole of pan 1, 2, 3,6, 7, 8, 9 & 10 size 26" od 12" bore 6 mm thick, synthetic rubber joint for pan condenser main hole (a) size 22"od, 12"bore, 6mm thick,, (b) 28"od,12"bore, 6mm thick, synthetic rubber joint for evaporator man hole od 19.11/16 bore 18. 7/16 & 5/8" thick, nitrile rubber seat for double beat valve of juice heatersize 240 mm od x 94 mm bore x 21 mm thick, nitrile rubber seat for double beat valve of juice heatersize 230 mm od x 94 mm bore x 21 mm thick, synthetic rubber ring suitable to stand at 150 ctemp. & 200 psi dia(inch.) bore(inch) thickness(mm), 24 12 6, 26 12 6, 28 12 6, 30 12 6, 36 18 6, 48 40 6, 54 46 6, synthetic rubber ring joint suitable to stand at 150 c temp. and 200 psi for sight glasses of pan & evaporator dia(mm.) bore(mm) thickness(mm), 230 180 6, 220 180 6, 210 165 2, 222 195 2, 218 190 2, 170 130 6, 150 110 6, neoprene rubber star for cane un-loader as per drg.no.ksc/cr/311286 size : 6", neoprene rubber star for cane un-loader as per drg.no.ksc/cr/17982 size : 9", rubber bushes, o.d.(inch) bore(inch) length(inch), 5/8 1, 7/8 1, 1 1, 1.1/4 1/2 1.1/2, 1.1/4 5/8 1, 1.1/4 1.1/4, 1.1/4 7/8 2, 1.1/2 1.1/4, 1.1/2 1.1/2, 1.1/2 7/8 1.3/4, 2 2, 2 7/8 2, 2 1 2, 2 1.1/2 7/8, 1 1/2" 3/4" 2", 2.1/2 1.1/4 2.1/2, 1 1/2 1, 1 1/2 1 1/4, 1 1/4 5/8 1 1/2, 1 1/4 3/4 1 1/2, 1 1/4 1/2 1 1/4, 1 1/2 3/4 2, 1/2 3/4 2, 1/2 5/8 1 1/2, spares for t.e.w. make type 36 dia juice clarifier, mud sealing ring as per sample/ drg., telescopic valve rubber ring as per sample/ drg., mud scraping rubber strip with wire netting size 32" x 5" x ", rubber seat for molasses weighing scale size- 14 dia, thickness- 16mm type ( silicon bitile rock hard rubber ), (a) rubber seat for water weighing scale (as per drawing ), (b) rubber seat for juice weighing scale (as per drawing ), neoprene rubber stoper(hard quality) for juice weighing scale 70/62 dia, 55 mm lenth as per drawing no-ksc/jk1/144, neopreme rubber seat for exhaust valve suitable for 200 0 c temerature as per drawing no : ksc/bh/1021, serial no 1 , od 510, id 365 mmthickness 40/15 mm, serial no 2 , od 555, id 380 mmthickness 40/15 mm, serial no 3 , od 655, id 480 mmthickness 40/15 mm, seri

CTN :40541399

10 Jun, 2025 NA

Mysore - Karnataka

Tender For supply of spares - supply of evaporator assembly , condenser assembly , drain hose 5 feet , r134a service valve discharge , r 134a service valve suction , receiver drier assembly , orifice drier assembly , coupler , coupler boot , receiver drier clamp , orifice drier clamp , hose 15mm id 19ft , hose 11mm id 18ft , hose 8mm id 2ft , hose 8mm id 4ft , heater valve , control panel-manual , louver , louver , diffuser , hose 8mm id 5ft , heater hose15mm id (engine to heater val) , heater hose 15mm id (heater valve to eva) , heater hose 15mm id (evaporator to engin) , rocker switch , wiring harness manual , sensor with wire , relay assembly , automatic temparature controller , relay board , heater valve , air filter assembly , hvac coil assembly , blower motor assembly , condenser coil , condenser fancondenser fan , condenser assembly , evaporator assembly , heater valve guard , evaporator side guard , orifice drier clamp , orifice guard , hose 15mm id 14ft , hose 11mm id 9.5ft , hose 8mm id 9.5ft , hose 8mm id 7ft , heater hose 15mm id 16ft , heater hose 15mm id 13ft , wiring harness manual , r134a service valves , condenser assembly , evaporator assembly , hose clamp 3/8 , hose clamp 1/2 , hose clamp 5/8 , front louvers assy , heater hose clamp , heater hose double clamp , heater valve , orifice drier assy (aries) , blower assembly , louver assembly , receiver drier clamp , orifice drier clamp , evaporator side guard , orifice guard , thermostat (eabd109) , air filter , compressor oil , filter knob , heater coil , colling coil , selector switch , knob selector switch , knob thermostat , rocker switch , breaker main , sensor wire , o-ring 3/8 , o-ring 1/2 , o-ring 5/8 , 3 duct hose 10ft , 3 duct hose clamp , hose 8mm id 12ft , hose 8mm id 6ft , hose 8mm id 2ft , heater hose 15mm id 15ft , heater hose 15mm id 9ft , heater hose 15mm id 18ft , hose 15mm id 16ft (aries) , hose 11mm id 9.5ft (aries) , hose 8mm id 2ft (aries) , pressure switch , control panel manual , wiring harness manual

Central Government/Public Sector

CTN :40543386

14 Jun, 2025 NA

Hyderabad-Ap - Andhra Pradesh

Tender For supply of 8 point 5 tr air cooled ductable split airconditioner equipped with scroll or rotary compressor expansion valve for optimal refrigerant feed galvanized constuction finished in powder coat , supply and installation of gss ducting fabricated as per is 655 standards will all accessories 22 gauge , supply and installation of gss ducting fabricated as per is 655 standards will all accessories 24 gauge , supply and fixing of canvass connections for connecting the ducting and ductable indoor units , refrigerant piping interconnecting condensing unit and indoor units using 11 by 8 inch 5 by 8 inch copper pipes and suction lines duly insulated with 9 mm thick tubular foam , drain piping using hard pvc pipes from indoor units to the nearest drain point for each indoor unit 32mm , pvc insulated copper un armoured cable 3 core 1 point 5 sqmm , supply and fixing of aluminium grill or diffusers , ms color dampers , itc of ac units including nitrogen pressure testing vaccumisation of the units initial refrigerant charge along with lifting and shifting of machines and other ancillary works , ms angle work for out door units , ms angle work for indoor units duct supports etc , timer for each machine , thermal insulation with 13 mm closed cell nitrile rubber , accoustic insulation with 10 mm thick open cell nitrile rubber , comprehensive amc charges for ducted ac units after completion of warranty first year , comprehensive amc charges for ducted ac unitsafter completion of warranty second year , comprehensive amc charges for ducted ac units after completion of warranty third year , comprehensive amc charges for ducted ac units after completion of warranty fourth year , comprehensive amc charges for ducted ac units after completion of warranty fifth year

Central Government/Public Sector

CTN :40225858

05 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : procurement of condensing unit controller for ahp area package airconditioner for ntpc nkstpp.

CTN :40469557

13 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - supply of washer(fig-130) , spring washer m12 (r.h)(ctlg fig-40) , bolt , 1 by 2 inch sq dr bi hex socket 27mm , switch panel 4wd 4wd actuator , ring snap throttle shaft , clamp , o ring (ctlg fig-2210) , o ring , piston , screen & cap filter , stud , gauge fuel (fig-12) , o ring , cable assy , hose , link ball , collar (fig-46) , cable , ring comp , shim assy , element , check valve , elbow , piston seal , flap rust 1300x24 , shim , bushing , shim , lamp , oil seal (fig-63) , cable (komatsu motor grader page 21-36) , guide , filter lub oil assy , cable assy , seal , belt water pump , service kit , hose(fig-70) , hose , bearing , shoe assy (chapter parking brake) , cushion assy , blade lift cylinder seal kit(fig-90) , tube compressure air inlet , cover assy (fig-19) , bearing , cyl kit (service kit) , valve shut down , service kit master cyl repair kit(ms sl no-697) , steering cyl kit , seal kit (fig no-96) , cable assy , techo service meter , seal kit (fig no-98) , cable assy , switch solenoid(44tc) , cable assy , seal kit (fig no -97) , seal kit(fig-99) , cable(fig-05) , unloader valve with tyre inflator , repair kit for scarifier cyl , guide , cable , cable , wheel cyl service kit , slave servo(ctlg fig-60f) , valve assy service kit , brake piping (2 by 4) air over hydraulic , cutting edge(fig-130) , propeller shaft assy , cylinder assy(komatsu motor grader page 24-23) , condensing unit & auto drain valve , wheel cyl assy (oem) , pilot check valve assy (fig no-108) , reservoir 10 litre(fig-60g) , steering cylinder(mg605r2 fig no 89) , steering cyl assy(fig-89) , kit , master cyl assy (fig-56) , hyd control valve (rh)(ispl fig-103) , hyd control valve (lh)(ispl fig-104) , leaning cyl assy (fig-86) , joint assy , propeller shaft , starter motor , blade shift cyl assy (fig-83) , shoe assy , valve assy

Central Government/Public Sector

CTN :40477707

05 Jun, 2025 NA

Durg - Chhattisgarh

Tender For tender for supply of spares required for komatsu hydraulic excavators - pulley hardening 6156 61 3640 komatsu , pulley hardening sd2080 21900x0 komatsu , compressor assy 20y 810 1260 komatsu , link assly 208 70 n2250 komatsu , arm bucket link 208 70 73140 komatsu , arm bucket link 208 70 73150 komatsu , cylinder assy pn 707 01 n1540 komatsu , evaporator pn nd446600 0992 komatsu , turbocharger assly 6156 81 8170 komatsu , starting motor asy 600 813 9323 komatsu , water pump pn 6154 61 1102 komatsu , bushing pn 208 70 61480 komatsu , bushing pn 209 70 52141 komatsu , tube pn 707 86 13080 komatsu , tube pn 208 63 73580 komatsu , cylinder assembly pn 70701n1530 komatsu , alternator assy pn 600 821 9690 komatsu , condenser assy pn 208 979 7520 komatsu

Central Government And Public Sector

CTN :40477958

16 Jun, 2025 NA

Kudankulam - Tamil Nadu

Tender For tender for supply of consumables and spares for debris filter - gear sealing screen bearing part number 21310 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , shaft sleeve part no. 21331 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , rear bearing part no. 21332 & 21365 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , ring part no. 21333 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , front bearing part no. 21334 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , o ring for dummy part no. 21336 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , u seal part no. 21338 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , shaft seal part no. 21340 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , bush part no. 21367 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , manhole o-ring part no. 51125 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , screen basket bearing part no. 21508 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , soft plastic part no. 21509 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , protection muff with clip set part no. 21402 , 21745 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , drive shat o-ring part no. 21724 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , double angular bearing part no. 21738 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , seal kit int & ext circlip , oil seal & deflector disc part no. 21740 , 21741 21742 , 21744 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , debris outlet bearing part no. 21823 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , v ring part no. 21824 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , cover sheet part no. 21878 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , sight glass part no. 21120 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , sight glass gasket part no. 21119 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , hex. socket counter sunk screw m12 part no. 21510 for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , worm wheel gear box for worm planetary gear box wpg part no. 21335a for gea-bgr make debris filter of size dn 2400 for condenser tube cleaning system , screen bearing part no. 21310 for gea-bgr make debris filter of size dn 600 for condenser tube cleaning system , screen bearing assembly part no. 21302-21310 for gea-bgr make debris filter of size dn 600 for condenser tube cleaning system , shaft sleeve part no. 21331 for gea-bgr make debris filter of size dn 600 for condenser tube cleaning system , sealing rear sleeve with bush part no. 21332 & 21365 for gea-bgr make debris filter of size dn 600 for condenser tube cleaning system , ring part no. 21333 for gea-bgr make debris filter of size dn 600 for condenser tube cleaning system , sealing front bush part no. 21334 for gea-bgr make debris filter of size dn 600 for condenser tube cleaning system , o-ring for dummy part no. 21336 for gea-bgr make debris filter of size dn 600 for condenser tube cleaning system , u seal part no. 21338 for gea-bgr make debris filter of size dn 600 for condenser tube cleaning system , shaft seal part no. 21340 for gea-bgr make debris filter of size dn 600 for condenser tube cleaning system , bush part no. 21367 for gea-bgr make debris filter of size dn 600 for condenser tube cleaning system , manhole o-rin

State Government

CTN :40495157

03 Jun, 2025 20.86 Lacs

Mumbai - Maharashtra

Tender For providing semi comprehensive maintenance of 5 nos. 8.75 tr air-cooled condensing units with ahu of walkin - cooler type cold room units and room ncubator allied

Condensing Unit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors