Latest connection set Tenders | Government connection set Tenders

corporations/Associations/Others

CTN :40496874

06 Jun, 2025 6.13 Lacs

Gondal - Gujarat

Tender For providing and installation of straight joint kit suitable for 132kv 1cx800 sq.mm. al. conductor xlpe insulated copper wire screen poly aluminum-armored power cable at 132kv lilo visavadar line originating from the from existing 132kv s/c gondal-haripur line, under construction division office-junagadh.

corporations/Associations/Others

CTN :40494808

09 Jun, 2025 NA

Thanjavur - Tamil Nadu

Tender For supply of 11 kv 3x300 sqmm termination kit 11 kv 3x300 sqmm straight joint kit lt 4x240sqmm straight joint kit lt 4x120sqmm straight joint kit

State Government

CTN :40279012

16 Jun, 2025 274

Bengaluru - Karnataka

Tender For e- tender for supply of orthopaedic trauma and arthroplasty implants high end - hemihydrate calcium sulphate kit 10- cc, hemihydrate calcium sulphate kit -5 cc, distal femur nails for standard and periprosthetic fractures with larger distal bends and with locking attachment washer or condular nuts and washers, us fda approved, reamer bone harvesting kit with reamer head and reaming rod , us fda approved , variable angle locking calcaneal plate 2.7mm with/without tab small/medium/large -, 2.7mm va locking screw -, 2.7 mm metaphyseal screw 2.7mm cortex screw variable angle locking screw should have option to lock at plus -15 degree off axis in any direction compele range of size shape and side specific implant with instumentation at the time of surgery.implant should be us fda/eu-ce/bis standard compliant., low profile distal tibial medial plate 3.5mm,6-14 holes,titanium, locking head screw 3.5 mm, l 10-60 mm, titanium, cortical screw 3.5 mm self tapping, l 10-60 mm, titanium, cancellous screws 4mm full/half threaded, l-20-80mm,titanium variable angle locking screw should have option to lock at plus -15 degree off axis in any direction compele range of size shape and side specific implant with instumentation at the time of surgery.implant should be us fda/eu-ce/bis standard compliant., lcp anterolateral distal tibia plate 3.5mm, right or left,(5-21)holes, titanium, locking head screw 3.5 mm, l 10-60 mm, titanium, cortical screw 3.5 mm self tapping, l 10-60 mm, titanium, cancellous screws 4mm full/half threaded, l-20-80mm,titanium, radial head replacement system is a solution for replacing the radial head for radial head fractures to restore elbow stability and forearm rotation to maintain the legth of radius. implants should be available in 19 mm,22 mm,25 mm variant and available in stem varing 5.5 mm to 8.5 mm and stem length 21 mm to 24. the implants should be uncemented with all instruments in sterile form for one time use., polymethylmethacrylate (pmma) injectable bone cement system for augmentation of proximal femoral nailing system (tfna) through cannulated implants and instruments for patients with poor bone quality (such as osteoporosis). its applicator allows surgeons to inject cement into the femoral head through cannulated implants, reducing the risk of cut-out, locking attachment plate 3.5 mm is a fixed-angle construct in periprosthetic fractures and fractures in the presence of intramedullary implants, particularly in osteopenic bone where screw purchase is compromised the plate is attached to existing locking compression plates (lcp using a connecting screw, to augment stabilization of fractures.the arms on each side of the plate offer the possibility of bypassing the prosthesis stem with 3.5 mm locking screws (or 3.5 mm cortex screws)., locking anterior patella variable angle plate for simple and complex patella fractures should have range of plates - core, to address different fracture pattern with 2.7 mm va locking screws and 2.7 cortex screws. variable angle locking screw should have option to lock at 15 degree off axis in any direction compele range of size shape and side specific implant with instumentation at the time of surgery.implant should be us fda/eu-ce/bis standard compliant., variable angle locking hand system consists of plates that are anatomic, procedure-specific for the fracture fixation of metacarples and phalanges, 1.3 mm profile plate configuration includes either straight plate/ t-plate/phalangeal base plate/y- plate/strut plate/web plate/phalangeal head plate, the construct consists of plate 1.3 mm, va locking head screw 1.3mm, cortical screws 1.3 mm., variable angle lcp clavicle plate which can be used for lateral extension, medial, shaft, anterior and for ac joint fracture. the construct consist of plate, locking head screw 2.7 mm and cortical screws 2.7 mm, (compele range of size shape and side specific implant with instumentation at the time of surgery.implant should be us fda/eu-ce stan

CTN :40478759

16 Jun, 2025 49.45 Lacs

Hyderabad-T - Telangana

Tender For providing of custom bid for services - outsourcing of services for operation and maintenance of 132 / 11 kv mrs extra high voltage with 50 kva dg set and connected equipments at mrs and certain distribution system under ge (i) r&d rci, hyderabad. - boq item no 1 skilled electrician per shift of 08 hours 1023 shifts,custom bid for services - boq item no 2 high skilled electrician per shift of 08 hours 1023 shifts,custom bid for services - boq item no 3 un skilled helper per shift of 08 hours 1023 shifts,custom bid for services - boq item no 4 supply only outdoor end termination, heat shrink type joint complete with jointing suitable for 3 core xlpe armoured size 120 sqmm to 185 sqmm for 11kv (earthed) grade complete all as specified and directed 1..,custom bid for services - boq item no 5 all as per item no 4 above but cable of size 3 core 95 sqmm 08 each,custom bid for services - boq item no 6 supply only straight through heat shrink type joint complete with for 3 core xlpe armoured aluminium conductor cable of size 120sqmm to 185sqmm for 11kv (earthed) grade complete all as specified and directed ..,custom bid for services - boq item no 7 all as per item no 6 above but cable of size 3 core 95 sqmm 12

CTN :40477659

16 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - washer for nozzle holder , rubber bush , nut for clamp , washer(p-9) , spanner oj fixed be nominal a f mn 7x8 , washer for sump (os sl no-76) , spanner de 10 x 12mm , gasket nozzle(os em oblique r655 dt 01.02.19) , split pin 1 by 8 dia (os sl no-43) , joint(ms sl no-06) , valve split cone (400 by 402 engine p-11 sl no25) , spnt ojde 10x13 mm by 10x11mm , de spanner 3 by 16 x 1 4 , dowel shot (os sl no-19) , nut 1 by 2 bsf (os sl no-42) , valve cap , dowel (os sl no-59) , normal nut(ms sl no-18) , key woodruff(ms sl no-68) , copper washer(p-9) , stud 3.8 bsf for manifold(ms sl no-15) , bolt 3x8 bsf self locking(chicago) , joint(ms sl no-8) , valve spring coller , nyloc nut thin(ms sl no-14) , sealing ring , bolt 5 by 16 bsf , stud 1 by 2 bsf , screw f by w to adapter , stud 5 by 16 bsf , plug(ms sl no-07) , stud 3 by 8 inch bsfx1.625 inch long , bolt 5 by6 bsf (os sl no-13) , key drain plug , lock plate , de spanner 5 by 16 x 3 by 8 inch , ce bush (ashok leyland p-107 sl no-26) , lock nut(ms sl no-24) , ball end(ms sl no-25) , oil gallery plug , gasket (os sl no-298) , gasket (os sl no-297) , screw driver 200mm , hose 7 by 16-0.45 mtr , hose 9 by 16-0.33 mtr , jubilee clip (os sl no-245) , stud 3.8 bsf for manifold(ms sl no-17) , bush (os sl no-172) , seal insert rubber (os sl no-95) , hose 9 by 16-0.8mtr , key (os sl no-47) , clamping piece (os sl no-99) , clamp(p-25) , rocker lever bush(ms sl no-26) , elbow (os sl no-240) , stud 1 by 2 feet bsf (os sl no-12) , o ring(chicago260) , hose 9 by 16-1 mtr , 6 inch cutting plier , straight coupling(p-10) , gasket , joint for side cover rh front (os sl no-160) , screw driver engr 300mm(ces-45) , hose 9 by 16-1.5mtr , pipe clip (os sl no-253) , o ring (cps-260) , small end bush (os sl no-38) , stud 1 by 2 feet bsf (os sl no-10) , o ring(chicago260) , pressure gauge , hose 7 by 16-1.2mtr , oil seal (ms sl no-66) , pliers side cutting , push rod(ms sl no-10) , gasket , injector clamp , oil seal (os sl no-222) , hose , bolt 1 by 2 bsf (os sl no-41) , straight flex hose (os sl no-242) , driving plate (os sl no-86) , radiator outlet hose(ms sl no-190) , s a of rocker lever rh(with bush) , hose(os sl no-243) , sealing washer (os sl no-232) , hammer 750 gms , sleeve (os sl no-49) , insulator bush (os sl no-230) , split pin (os sl no-87) , s aof dipstick guaide , hose 7 by 16-02mtr(cps-260 instrument panel and pipin , fuel filter (os sl no-91) , s a of dipstick (os sl no-250) , diaphragm(chicago260) , breather(p-9) , 3 by 4 inch female coupling , oil level sight glass (os sl no-299) , rocker bracket(ms sl no-28) , insulator bush (main) (os sl no-233) , insulator plate (os sl no-234) , seal nut spanner , hose (os sl no-239) , cyl hd cover gasket , thrust washer , oil flinger (os sl no-48) , button-stop cable(p-10) , non return valve fuel (os sl no-107) , s a of rocker lever lh(ms sl no-23) , grease gun , cable for rpm meter(ms sl no-186) , anti-vibration pad (cps260 instrument panel) , hose 9 by 16-1.8 mtr (os sl no-328) , ball valve rc 3 by 4 inch (cps-260 page no 14) , elbow coupling(p-29) , oil pump assy , crank shaft oil seal(ms sl no-50) , seal solenoid terminal (os sl no-229) , oil seal service kit(cps-260) , s a of injection leak of pipe , rubber elbow (pneumatic air system page18) , pressure gauge , thermostat western thomson(ms sl no-111) , low oil pressure switch(ms sl no-05) , pressure plate (os sl no-217) , belt driving , temprature gauge(ces-12) , hose assy rubber pneumatic 20mm 1d x 3.05m lg , claw coupling(os em r655 dt 01.02.19) , con rod bearing set (chicago) , hose pipe assy 1 by 2 inch x 63 inch , con rod bearing set u oblique s 1 (al-p-15 by 22) , hose pipe assy 3 by 4 inch x 96 , air & oil separator (os sl no-248) , suction filter (os sl no-112) , rain cap(p-25) , hose pneumatic 3 by 4 inch mk2 10 feet , composite valve seat kit , s a of seal housing (os sl no-56) , kit valve guide & valve seal(os sl no-26) , inner cartridge , hose pneumatic wi

CTN :38412040

06 Jun, 2025 10.00 Lacs

Surat - Gujarat

Tender For corrigendum : tenders location the fault and repairing the same by providing 11/22kv straight through joint kit and outdoor termination at various places of sachin 02 ind s/dn under surat ind dn.

CTN :40218045

31 May, 2025 49.45 Lacs

Hyderabad-T - Telangana

Tender For corrigendum : providing of custom bid for services - boq item no 1 skilled electrician per shift of 08 hours 1023 shifts,custom bid for services - boq item no 2 high skilled electrician per shift of 08 hours 1023 shifts,custom bid for services - boq item no 3 un skilled helper per shift of 08 hours 1023 shifts,custom bid for services - boq item no 4 supply only outdoor end termination, heat shrink type joint complete with suitable for 3 core xlpe armoured aluminium conductor cable of size 120 sqmm to 185 sqmm for 11kv (earthed) grade 14 each,custom bid for services - boq item no 5 all as per item no 4 above but cable of size 3 core 95 sqmm 08 each,custom bid for services - boq item no 6 supply only straight through heat shrink type joint complete with jointing for 3 core xlpe armoured aluminium conductor cable of size 120sqmm to 185sqmm for 11kv (earthed) 15 each,custom bid for services - boq item no 7 all as per item no 6 above but cable of size 3 core 95 sqmm 12 each

CTN :39964618

02 Jun, 2025 NA

Uttara Kannada - Karnataka

Tender For corrigendum : tender for supply of valves permut and distributor safety valve - pressure reducing valve set at 25 bar , o-ring 32.5x3.6-20a8 , o-ring 31.50x1.80-20a8 , spring e1457 f1472 , friction ring , counter gasket , friction washer , sealing ring , friction ring , counter gasket , counter gasket , o-ring , spare seals kit for wafer valve dn32 , electric actuator , straight-flow ball valve3-4 g female thread with hand lever. , straightflow ball valve1 1-4 g female thread hand lever , o-ring 224x7 20a8 , o-ring 47.5x3.55 20a8 , o-ring 75x3.55 20a8 , o-ring 75 , 00 x 3 , 55 20a8 an , grounding braid , pre-stressing washer , lock washer nd10 , lock washer nd8 stainless steel , lock wire , spring , lock washer , lock washer , valve packing p8-23736-0 , pilot non return valve , ap hoisting-lowering control solenoid valve , internal valve grinding electrodistributor , repairing kit dn450 , o-ring 12 , 00x1 , 50 elastomer cl4 c8 , cardan joint , o-ring 140.00x2 elastomer cl64 c8 , o-ring 18.30x3.60 20a8 , cover seal mrgh v01 ame monel , upper scraper ring , lower scraper ring , bushing , gasket bs d39 20a8 aviation , o-ring 079.50x2.5 elastomer cl 64 c8 , cartridge 200u , ring bs a6 , pump gasket , o-ring 113.67x5.33 , o-ring 56.52x5.33 , lock plate , washer nl m14 stainless steel , lock tab washer nd10 galvanized steel , lock tab washer nd14 , lock tab washer nd5 galv. steel , non-return valve dia.19.4 (18cr000c0025) , separator cartridge , spring washer 112x6 , safety disc , motor gasket , o-ring , valve gasket , double delta turcite ring , lock tab washer nd8 galvanized steel , bearing scraper 25 x 28 x 1.5 , four-way seat nd32 , spring no.81 , packing , copper gasket 14.3x18x1.5 , gasket jf4 67.64x78 3x5.33 , fourfold seal-ring 50.17x5.33 , copper gasket 18x24x1 , o-ring 6.30x1.80 20a8 , spring pin e8-30 (cut to 10 mm) stainless stee , lock washer dn8 , plastic valve , valve washer , valve , o-ring , coil , pt100 sensor assembly , level sight gauge , pivot seat , gland , o ring 2 , 9 x 1 , 78 an1 80 shore nitrile , stainless steel seat , stainless steel valve assembly pctfe insert , discharge needle , nitrile diaphragm , o ring 2 , 9 x 1 , 78 an1 80 shore nitrile , o ring 6 , 4 x 1 , 9 r5a 80 shore nitrile , o ring 20 x 2 , 5 80 shore nitrile , o ring 23 , 39 x 3 , 53 an18 80 shore nitrile , o-ring dia.33.5 - 2.65 , pressure limiter set at 30 bar , bearing gasket , stem gasket , valve gasket , snap ring , cylinder o ring , joint torique int. 24 , 6 tore 3 , 6 ref. r19 , joint torique int. 107.5 tore 3.53

Central Government And Public Sector

CTN :40447106

13 Jun, 2025 NA

Dibrugarh - Assam

Tender For procurement of laboratory items for bcpl laboratory - 1beakers griffin low form 100 ml , 2funnel plain 60 angle 100 mm , 3measuring pipette mohr type 5 ml , 4measuring pipette mohr type 10 ml , 5reagent bottle amber 250 ml , 6burette straight bore ptfe key 50ml , 7condenders graham coiled 24 29 , 8condensers , 9erlenmeyer flask 24 29 500 ml , 10volumetric flask 100 ml class a , 11separating funnel ptfe stop cock pear , 12separating funnels ptfe 1000 ml , 13dean stark apparatus , 14reagent bottle plain 250 ml , 15bottle reagent narrow mouth 125ml plain , 16burette straight bore ptfe class a 25ml , 17cetrifuge tube 15 ml capacity 17 120 , 18iodine flask capacity 250 ml , 19volumetric flask 250 ml , 20volumetric flask 500 ml class a , 21volumetric flasks 1000 ml class a , 22volumetric flasks class a 2000 ml , 23adapter receiver plain bent socket joint , 24adapter recovery bent with sloping , 25enlarging connecting adaptors socket , 26boropure glass filtration assembly , 27rotary evaporator flask , 28measuring cylinder 100 ml class a , 29measuring cylinder 500 ml a class , 30measuring cylinder 1000 ml a class , 31measuring cylinder capacity 25 ml , 32measuring cylinder capacity 10 , 33beakers griffin low form 1000ml , 34bottles reagent amber narrow 125ml , 35utility tray size 540 435 130 mm , 36plastic bottle narrow mouth pp 1 l , 37plastic bottle narrow mouth pp 500 ml , 38plastic bottle wide mouth pp grd 1 l , 39plastic bottle wide mouth pp 500 ml , 40plastic bottle wide mouth pp 250 ml , 41plastic bottle wide mouth pp 125 ml , 42wash bottle wide mouth 1000ml , 43draining tray size 400 300 100 mm , 44burette clamp pp double , 45desiccator plain dia 300 mm pp made , 46glassware cleaning nylon brush , 47silicon tubing 8mm id 12mm od 10meter , 48silicon tubing 6mm id 9mm od 10meter , 49heating mantles energy regulators 500ml , 50heating mantles energy regulators 1000ml , 51buchner funnel with sintered disc 80ml , 52vetroclean 5000 ml , 53tripod stand for holding beaker , 54ashless whatmannfilterpaper 40 dia 110m , 55ashless filter paper grade 4 dia150 mm , 56ashless filter paper grade 42 dia 125mm , 57silica crucible 50 ml , 58uv cuvette quartz path length 10 mm , 59ordinary filter paper sheet rim , 60viscometer cannon fenske tube , 61viscometer cannon fenske tube

CTN :40468732

14 Jun, 2025 NA

Pune - Maharashtra

Tender For supply of lv2 icvs cqa icv 675-71-sa spent case collector , lv2 icvs 765-50-1554 bracket lh , lv2 icvs cqa icv 675-77- sa stowage clamp , lv2 icvs 5340720327404 765-58- 146 sector seperator gauge sector , lv2 icvs 4710720260065 765-05-sb377 tube assembly metal , lv2 icvs 3040720494030 ak150b-07 web , lv2 icvs 2590- 72-030-7931 675-58-208 bracket vehicular components , lv2 icvs 4730720104493 6745-05-sb3049 swivel joint pipe , lv2 icvs 4730-080074 6745-05- sb3044 adapter straight t-pipe to tube , lv2 icvs gost 7795-70 m6-8gx30 46 019 bolt m6-8gx30 46 019 , lv2 icvs ost 17-600-81 3gd-96 rivet steel nickel plated 3gd-96 , lv2 icvs cqa icv 675-39-sa- lmg support bracket , lv2 icvs gost 7796-70 m8-6gx20 46 019 bolt m8-6gx20 46 019 , lv2 icvs gost 5915-70 nut m3-6h-016 nut m3-6h 016 , lv2 icvs gost 7798-70 m6- 6gx14 46 019 bolt m6-6gx14 46 019 , lv2 icvs gost 2526-70 m8-7h 4 019 nut m8-7h 4 019 , lv2 icvs fg125- 3711-002 ring , lv2 icvs 765-50-sb581 box rh , lv2 icvs 31 bmp mr cqa icv 002 2019 mr kit for idler wheel with track adjust , lv2 icvs 303072015358 765- 77sb124 belt felt , k9 bmp nbc 5330381742 765-71-480 gasket , lv2 icvs 47 bmp mr cqa icv 002 2019 mr kit for fenders and splash panel cons , lv2 icvs 4710- 042390 765-05-sb319 tube assy metal , lv2 icvs nbcrv esp 384 280350118 gear box , lv2 icvs 5330720115592 765-58-29 gasket

Connection Set Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

State Government

Central Government And Public Sector