Latest copper bar Tenders | Government copper bar Tenders

Central Government/Public Sector

CTN :45055042

11 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of fiber board and bushing with copper bar

corporations/Associations/Others

CTN :45045205

14 May, 2026 1.63 Crore

Raigad - Maharashtra

Tender For supply of tent , chair , table , torch , dragon torch , rain suit , patrolman stick , punji , pick axe beater , walkie talkie , clip applicator , rail disc cutter , rail disc cutter wheel stone , rail drilling machine , rail drilling tool , chamfering kit , at welding trimmer , rail heating blower for at weld , thermit welding tool set , rail profile weld grinder , rail grinding stone , straight edge , track jack , track jack mechanical , rail dolly , rail tong , prc sleepers chain , joggled fish plate , fish plate 1 mtr long , c clamp , anti sabotage device , anti sabotage device key , fish bolt spanner , hammer 5kg , hammer 3kg , digital toe load measuring device , rail tensioner , hydraulic sleeper spacer , mono rail wheel barrow , portable dc welding generator , rail wear gauge , continuous rail thermometer , laser distance meter , electric jumper wire , jim crow , rail thermometer , pwi inspection kit , versine measuring kit , track gauge cum level , destressing roller , off track tamper , off track tamper trolley , tamping tools , acd male , acd female , electric arc welding machine , banner flag , hs flag red , hs flag green , safety jacket , safety helmet , safety shoe , tricolor torch , number plate , staff for patrol man , key man bag , breathe analyzer , keying hammer , pway inspection trolley , material trolley , dip lorrey , measuring tape 30mtr , measuring tape 15mtr , measuring tape 5mtr , steel sections cutting equipment , plate screw tubular spanner , wire basket , adjustable spanner , whistle , powrah spade , rake ballast , pan mortar , wooden blocks , chain saw , bush cutter , tarpaulin , grease , grease gun , caution indicator boards , speed indicator boards , termination boards , column posting for boards , generator , remote controlled gang hooter , safety goggles , ambient temprature thermometer , small testing hammer , inspection cum chipping hammer , elcometer , pocket steel tape , straight edge 1m , measuring tape 30m , log line with 20 kg mettalic clinder , probing rod , inside calliper outside calliper , feeler gauge , mirror 10x15 cm , bridge inspection torch light , magnifying glass 100 mm , piano wire with clamps , plumb bob , steel scraper , binoculars , current meter , echo sounder , schmidts hammer , dye penetration kit , magnetic crack detector , welding gauge , safety belt , duro meter , auto level , hydraulic torque wrench , hexagonal crowbar , tommy bar , fire buckets with stand , emergency medical hand stretcher , first aid box - first aid box , tool box , hammer 500gm , gum boots //bid details 2 / 96

Central Government / Public Sector

CTN :45037956

14 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of expansion type terminal connector suitable for 36 mm aluminum tubular bus bar to suit 25 kv isolator terminal pad (6481 & 6482) complete assembly as per rdso spec: ti/spc/ohe/fittings/0130-10/13-rev-1 or latest. drawing no: eti/psi/p 6480-1 . make: rdso approved sources. rdso item no.3100655008. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44539772

11 May, 2026 NA

Ukai - Gujarat

Tender For corrigendum : supply of various types lighting material for emd-iii-common, colony electrical maint. & electrical fuel section at gsecl ukai tps. (emd-iii (common) et-6227) - industrial exhaust fan 1 phase 230 v, size: 305 mm,900 rpm suitable for heavy duty having minimum sound, ring mounted to give maximum volume under free air flow., cg make,bracket type wall mounted fan,230volt,ac,50hz,sweep-450mm( 18 inch ),oscillating & tilting type, industrial wall mounted fan 1ph, pedestal fan, size 450mm (18-inch) ,rpm-1440,1-phase,3-speed, 230 volt,100 watt with regulator., heavy duty industrial pedestal fan with regulator, 1-phase,230 v ac, sweep: 450 mm, totally metal body., industrial wall mounted fan, sweep-750 mm, voltage - 230 v ac, 3 cx1.5 sqmm flexible copper conductor 1100 v, copper flexible wire 3 cx2.5 sqmm ,1.1 kv, flexible unsheathed pvc insulated copper cable of size 4 corex6 sqmm, 1.1kv,multi stranded anealed tinned copper,epr insulated,extruded pcp sheath flexible cable size 4cx4 sqmm, pvc twin wire 2.5mm sqr., ictpn switch 415 volts,200 amp. t.p. heavy duty., ictp switch 415 volts,100 amp. t.p. heavy duty., led tube light fixture 4 ft long 18/20 watt., mcb single pole 6 amp., elcb+mcb 32 amp,30 ma, 4-pole (3 + n) 240/415 v, 50 hz, miniature circuit breaker 3 - pole, 32 a, 415 v, rccb,240/415v ac, 63 amp, 4 pole, sens:30ma ,mounting- din rail, mcbs(3 pole+nutral) miniature circuit breker current rating 63amp., ring spanner set model 1812 taparia make, fix spanner size 6x7 mm to 30x32 mm jhalani make, tubular spanner set (8 pcs ) product no ts 08 taparia make, taparia combination plier, product no.1621-8,210 mm, crimping tools, capacity: 6 mm2 to 50 mm2., crimping tools capacity: 10 mm2 to 185 mm2., wooden lighting board with elcb+mcb, 5 pin switch socket, control fuse, flexible cable, industrial top etc as per detail specification, 2 switch + 2 plug wooden board with top sunmica, lighting panel with 18 outgoing c.k.t., supplied with double door, insulated busbar, insulated neutral bars, earth bar, cable ties, circuit identification lables, modular type 16/20 amp 1-way swich,240 volt, 5 / 6 ampere modular switch, 230 volts, 50 hz., switch socket combined 6 & 16 amp.anchor make, 6/16a uni.socket code -4191, 15 / 16 ampere modular socket, 230 volts, 50 hz., plug socket 6 amp 230v,5 hole, led lamp 9 watt, 230v, elmex terminal connector 35 sqmm type cst-35, indication led lamp 25.5 mm dia. 110v ac, 0.5w, red with lvgp, smc junction box : dimension (outside-mm) 730 x 510 x 220, dimension (inside-mm) 700 x 480 x 200, make : sintex, pvc adhesive insulation tape roll, ht tap roll, wolf make air blower, bosch make hot air gun model ghg 630 dce power input: 2000 watts, temprature range: 50-630 degree c, air flow rate: 150/300/5001/min, weight: 0.73kgs, digital multimeter, industrial exhaust fan 1 phase 230 v, size: 305 mm,900 rpm suitable for heavy duty having minimum sound, ring mounted to give maximum volume under free air flow., digital clamp meter, cg make,bracket type wall mounted fan,230volt,ac,50hz,sweep-450mm( 18 inch ),oscillating & tilting type, industrial wall mounted fan 1ph, pedestal fan, size 450mm (18-inch) ,rpm-1440,1-phase,3-speed, 230 volt,100 watt with regulator., heavy duty industrial pedestal fan with regulator, 1-phase,230 v ac, sweep: 450 mm, totally metal body., industrial wall mounted fan, sweep-750 mm, voltage - 230 v ac, 3 cx1.5 sqmm flexible copper conductor 1100 v, copper flexible wire 3 cx2.5 sqmm ,1.1 kv, flexible unsheathed pvc insulated copper cable of size 4 corex6 sqmm, 1.1kv,multi stranded anealed tinned copper,epr insulated,extruded pcp sheath flexible cable size 4cx4 sqmm, pvc twin wire 2.5mm sqr., ictpn switch 415 volts,200 amp. t.p. heavy duty., ictp switch 415 volts,100 amp. t.p. heavy duty., led tube light fixture 4 ft long 18/20 watt., mcb single pole 6 amp., elcb+mcb 32 amp,30 ma, 4-pole (3 + n) 240/415 v, 50 hz, miniature circuit breaker 3 - pole, 32 a, 415 v, rccb,240/

CTN :44926927

27 Apr, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply and delivery of school requisites 2026 - angle grinder-grinding wheel, diameter 110 mm , power range, 750w to 2000w, 240v + key (eu), band saw-table size 400 x 548, mm, 900 w or 340 x 335 mm, 350, w 240 v + blade and sense (eu), bench drilling machine-13mm, chuck, 240v, minimum table size, 260 x 180 mm + chuck key (eu), bench grinder-minimum 250 w,, 240v, circular saw-minimum 1.5kw,, 240 v + fence and cross-cut guide, (eu) (table mounted), compressor -output 50l/min, 6, bar, 340 w + supply hose and clips, (eu), spraygun-0.7 mm nozzle, diameter, 800 cl capacity (approx), (0.7 mm - 1.4 mm), drilling machine (portable)-, chuck diameter 3 - 16mm, 240 v +, chuck key, extension cable-20 metres, hot wire cutter-40 w, 240v, jig saw (portable)- power range, 300 600 w, 240v + allen, key(eu), metal lathe-1.5kw, distance, between centres 750 mm, including tool bit, boring bar,, knurling tools, parting tools, tail, stock, chuck key, centre drill, dead, centre, revolving centre, face, plate, 4-jaw and 3-jaw chucks., (eu), planer / thicknesser-maximum, planing width 310mm,maximum, thicknesser capacity 230, mm,power range 3kw to 4kw,, 240 v + fence(eu, router (portable)- power range, 1200w to 1800 w, 240v + key, (eu), sander orbital-power range 250, w to 300 w, 240v (eu), soldering iron-80 w, strip heater-140 w, 240v, welding machine-electric arc, 6kw, 150a, 240v (with protective, casing) incluing clamp, cables and, shield. (eu), wood working lathe-distance, between centres 1093 mm, 550, w, 500 - 2000 revolutions per, minute including face plate, dead, centre, revolving centre, turning, tools and tool rest., abrafile frame-4" deep/blade, length 6" (+ blade on frame), adjustable spanner-jaws open : 22, mm length: 200 mm, adjustable spanner-jaws open : 31, mm length: 300 mm, anvil-50kg, bench hook*-material: beech, size:250 mm x 150 mm, bench shear (guillotine)- up to 4, mm sheet and 10 mm rod, bradawl-minimum blade length, 32 mm, carpenters mallet-4.5 head width, centre punch-round head,, knurled body, 4" length, centre square-std size 75 mm, chisels- mortice-size: 6 mm, chisels- mortice-size: 9 mm, chisels -bevelled edge-size: 12, mm, chisels -bevelled edge-size: 19, mm, chisels -bevelled edge-size: 25, mm, chisels- firmer-size: 6 mm, chisels- firmer-size: 12 mm, chisels- firmer-size: 25 mm, cold chisels-type: flat, size:150 mm x 12 mm, combination drill-std drill set, combination pliers-size: 200 mm, coping saws-blade length: 150, mm, corner clamps-cramping capacity, 4" mild steel type, countersunk bit-head diameter:, 3/8" length: 2", dividers-length 6", engineers square-length 6", engineers vice-jaw width: 6", engineer's swivel base table (50, mm), forstner bit-bit set: sizes 10, 12,, 15, 16, 18, 20, 22, 25, 26, 28, 30,, 35, 40, 45 & 50 mm, gcramps-capacity: 6", gcramps-capacity: 12", hacksaw-non-adjustable 12", tubular frame wing nut tensioning, device for 12" blades, hammer: ballpein-0.5 lb, hammer: ballpein-0.75 lb, hammer: ballpein-1 lb, hammer claw-0.5 lb, hammer cross pein-0.75 lb, hand drill-chuck capacity 8 mm, hand files including handles-size:, 6", hand files including handles-size:, 8", hand files including handles-size:, 10", hand saws-22" long - cross cut, hand saws-22" long -rip, inside calipers-arm length 6", jack plane-14" long, jenny calipers-arm length 6", junior hacksaw-length blade 6", machine vice-maximumm jaws, opening 85mm, marking gauge-minimum length, 240mm, marking knife-length of body, 15cm, measuring tape-measuring length:, range 3m to 5 m, metalwork bench-size 2010 x 810, x 800mm, mitre box-mitre block 9" long, (plastic), mole grip-length 7, nail punch-set of 4 nail punches;, 1.5, 2.5, 3 & 5 mm, needle files-set of 6 - 14cm, oil can-2 pints capacity (1-2 pint), oil stone-150 mm length, outside calipers-arm length 6", pincers-length of body: 180 mm, pipe wrench-length: 300 mm, rasps-length size: 200 mm - 350, mm, ring spanner-set 6mm 25mm, riveting machine kit-sets rivets, up to 5 mm

CTN :44806175

25 Apr, 2026 NA

Kamrup - Assam

Tender For bid to ras corrigendum : supply of double shutter incl all fitting and as directed make jindal or hindalco isi makred , aluminium ventilator three track frame section weight 1.5 kg per rm less than 1.5 kg per rm size 1200 mm x 600 fixed type with glass 4 mm thick 0.45 mm dia ss wire mesh including all fitting , ceramic tiles of size 600 x 600 mm for floor thickness between 9 to 10 mm thick make kajaria or johnson or orient isi equivalent 1st quality conform to is 156 of 2006 , white cement conform to is 8042 of 1989 make acc or birla white or ambuja or isi equivlent , moveable pvc panel 12 mm thick aluminum frame work 6 ft height and 4 feet long 2 panel in each frame room divider for privacy officer accents including holding system complete , app based polymeric membrane min weighing 30 kg per sqm and minimum 3 mm thick reinforced with polyster non wove frabic all specition as per ts , priming surface and applying bitumen as a primer in base of app membrane , ms rhs size 100 x 50 x 4.5 ms frame work for roof trusses purlin rafter and ms plate etc all as directed make tata or sail or jsw , ms rhs size 50 x 25 x 2.9 , ms rha of size 96 x 48 x 3.2 , ms flat 40 x 5mm thick for wind tie make tata or sail or jsw , ms plate of size 10mm thick , ms plate of size 8mm thick , ms angle of size 40 x 40 x 6 for cleat , ms plate of size 12 mm thick , ms nuts and bolts of length 100 mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25 mm of shank and 2 wahsers 3 mm thick complete all as directed , ppgi ridge sheet 0.80 mm thick 10 x 3 ft make sail or tata or jindal incl treating galvanised surface with mordan solution 2 coat synthetic camoglage paint over one coat of red oxide primer , ppgi ridge sheet 0.80 mm thick of 90 cm wide make sail or tata or jindal incl treating galvanised surface mordant solution two coat synthetic camoglage paint over one coat red oxide primer , hdpe sand bags og colour of size 0.75 x 0.375 x 0.15 , self taping steel screw half thread with rawl plug of 1and half 2 inch 100 nos per pkt , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 to 1989 make gold or ambuja or ultratech or acc or jk or dalmia retaining wall 48 x 4 mtr height 8 x 4 x 6 nos 48 rm , stone boulder 9 inch to 12 inch , pvc pipe 75mm dia 3 mtr long make prince or finolex or supreme or isi equivalent , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 to 1989 make gold or ambuja or ultratech or acc or jk or dalmia constr matiral for drain or sump , hardcore 63 to 90 mm , bricks sub class b , mild steel bars of size 10 mm dia conforming to is 432 part i 1982 make tata or sail or jsw or isi equivalent , three phase 1.2 hp monoblock pump 430 volt complete with incl 3 mtr length required flexible size suction pipe foot valve and connected accessories compete all as per ts , distribution box 8 way double door spn 240 volts copper bar and neutral link earthing stud conform to is 13032 and 8623 double door type make havells or legrand or l and t or isi euivalent , mcb spn 240 volts 32 amps make havells or l and t or standard or isi equivalent , mcb sp 240 volts 6 to 32 amps make havells or l and t or standard or isi equivalent , pvc tape 19 mm wide 5 mtr long make grip or anchor or kinjal or isi equivalent , cable pvc insulated electric cable heavy duty 1100 volts grade multi standard copper conductor size 1.5 sqmm single core all as per ts , cable pvc insulated electric cable heavy duty 1100 volts grade multi standerd copper conductor size 2.5 sqmm single core all as per ts , cable pvc insulated electric cable heavy duty 1100 volts grade multi standerd copper conductor size 4 sqmm single core all as per ts , pvc casing //bid details 2 / 87 capping 1 inch medium grade snow white make presto or polycab or finolex or isi equivalent , pvc casing capping 3 by 4 inch medium grade snow white make presto or polycab or finolex or isi equivalent , switch piano type 5a 230v flush type o

Central Government/Public Sector

CTN :44968327

25 May, 2026 NA

Nagaur - Rajasthan

Tender For supply of 50 mm aluminium tubular bus bar of size - 50 x 39 mm as per is - 5082 al alloy tograde in wp condition and is - 2673 (accuracy class - i) as per gr. 91e to is:5082 - 1998, is : 2673 -2002 and rdso specification. no. spec : eti/ohe/21(9/74) or latest. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44959229

18 May, 2026 NA

Nagaur - Rajasthan

Tender For supply of regid bimetallic terminal connector suitable for 50 mm dia, alluminium tubular bus bar to terminal pad of 25 kv isolater/ct conforming to rdsos drg.no.re/33/p/11090 oras per drawing no. eti/psi/p/11090 or latest consisting of part no.11091 & 11092" complete with connector body and clamping piece. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :44958278

11 May, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of 36 mm alluminium tubular bus bar of size: 36x28 mm as per is : 2672, is: 5082 and as per rdso specn no. spec: eti /ohe/ 21, ti/spc/ohe/fittings/0130-10/13-rev-1. make: rdso approved sources only. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44957961

29 Apr, 2026 NA

Raipur - Chhattisgarh

Tender For supply of double ended tubular box spanner set size : 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18-19, 20x22, 21x23, 24x27, 25x28, 30x32. tommy bar: 1-dia 12x250mm 2- special tommy bar. as per taparia price list-[12. (e) tubular spanner sets product no. ts 12p (12 pcs set) confirming to is 2030-1989 . make: taparia/ venus/ stainley or eqvt. [ warranty period: 30 months after the date of delivery ]

Copper Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors