Latest copper bar Tenders | Government copper bar Tenders

Central Government And Public Sector

CTN :40534153

09 Jun, 2025 16.93 Lacs

Agra - Uttar Pradesh

Tender For repairs to jere hamam and langer khana area at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (packing in bags 25kg & 50 kgs) (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (bansi paharpur qurry).(rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), water proofing compound (rate including g.s.t.)., clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), taking out of angle iron frame 40x40x6 mm having 12mm square bar with spikes 1.25mtr high and hold fast by manual labour and stacking within 50 meters lead etc. complete in all respect. (rate including g.s.t.), taking out stone masonry manually bit by bit without disturbing to the adjoining structure including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge : in cement mortar. (rate including g.s.t.), random rubble stone masonry with hard stone in super structure in cement mortar 1:6 (1cement 6 c. sand) including pointing, t&p, scaffolding etc. complete. (rate including g.s.t.), cr stone masonry with 70% available stone and 30% new stone in super structure and plinth with cement mortar 1:6 (1 cement: 6 coarse sand), pointing, scaffolding etc. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement: 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), repairing of old existing grills in boundary wall including supply of required materials, welding, fabricating & labour etc. complete. (rate including g.s.t.), providing & fixing m.s. gates of required pattern with angle iron frames (50x50x6)mm size graded with 10 cm c/c sq. bars 16mm size pointed at the top extra with same curved bar and each frame having gusset plate 6mm thick at corners & center and provision for hinges and locking arrangement with supply of r.s. joist (200x100x5.7)mm section for hanging m.s. gate including nut bolts, cutting fabricating welding etc. complete. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6) mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), coursed rubble masonry with hard stone (first or second sort) in facing up to 22.50 cm thick random rubble masonry in back side in superstructure above p

CTN :40534648

19 Jun, 2025 NA

Delhi - Delhi

Tender For rate contract/ fpq with dpsu (avnl) for qty 2186 item - rate contract/fpq, lv1/r72 , 2510008434 torsion bar, front, right hand, lv1/r72 , 175-52-037 ring packing, lv1/r72 , 5315008830 pin (drg no 172-04-485-a), lv1/r72 , 5330387928 gasket 15x40x70 (drg no 520-10-008-14), lv1/r72 , 172-95-063sb toolfor alignmt of transmisn gear unit, lv1/r72 , 5330396864 gasket, lv1/r72 , 5310-237279 washer c-8-01-016 (size d 8.4,d17 o,s 1, lv1/r72 , 5306056706 locking bolt (drg no 432-24-013-2), lv1/r72 , 5140012726 casing (drg no 54-28-615sb), lv1/r72 , 5120423880 key for nuts of bevel redn box of fan, lv1/r72 , 5330023398 gasket (drg no 175-32-206), lv1/r72 , 175-41-100 ring spring, lv1/r72 , 34-07-122 washer, lv1/r72 , 5330380840 gasket (drg no 155-31-863), lv1/r72 , 175-52-061 bolt, lv1/r72 , 5340174507 gasket (drg no 172-01-066), lv1/r72 , 172-60-163 packing, lv1/r72 , 175-45-022-1 buffer, lv1/r72 , 2510-008330 shield (drg no 172-04-170sb), lv1/r72 , 432-40-199-1 gasket, lv1/r72 , 5340177964 locking bolt (drg no 434-23-108), lv1/r72 , 175-24-076-01 gasket, lv1/r72 , 5330023192 gasket (drg no 172-2m-02-014sb), lv1/r72 , 5330383885 gasket 10x25x655 (520-10-007-19), lv1/r72 , 5330024042 collar (drg no 172-03-084), lv1/r72 , 520-09-001-06 clamp 10x7, lv1/r72 , 172-60-149 ring, lv1/r72 , 5340180610 strap (drg no 172-2m-01-033sb-1), lv1/r72 , 172-45-287-1 bolt, lv1/r72 , 219-09-586 gasket, lv1/r72 , 5306010168 bolt (drg no 172-47-051-1), lv1/r72 , 520-09-001-16 clamp 20x9, lv1/r72 , 172-2m-31-076 shock absorber, lv1/r72 , 172-45-054 ring, packing, lv1/r72 , 5315006923 pin (drg no 175-02-397), lv1/r72 , 2920005516 plug glow (drg no 54-42-45sb), lv1/r72 , 432-24-022 gasket, lv1/r72 , 172-47-121 gasket, lv1/r72 , 175-45-085-02 buffer, lv1/r72 , 5330017030 gasket (drg no 155-05-900), lv1/r72 , 520-10-004-19 gasket 21x190, lv1/r72 , 2510008305 (oh 82) screen (drg no 176-02-003sb), lv1/r72 , 172-62-154 bolt, lv1/r72 , 5306010166 bolt( drg no 175-33-578 ), lv1/r72 , 175-47-019 ring packing, lv1/r72 , 5330-382723 ring packing (drg no 2262a-176-2), lv1/r72 , 5330390406 gasket (drg no 172-91-710), lv1/r72 , 175-37-059 gasket, lv1/r72 , 434-11-042-1 absorber shock, lv1/r72 , 5330384105 gasket ( drg no 175-33-307-1), lv1/r72 , 5340174506 gasket (drg no 172-01-068), lv1/r72 , 172-47-126 gasket, lv1/r72 , 432-25-020-1 absorber shock, lv1/r72 , 4820057313 cover with valve assy (adu-04a sb), lv1/r72 , 229-06-034 jimmy (527 08 70 6002), lv1/r72 , 172-51-010 collar, lv1/r72 , 175-45-085-03 buffer, lv1/r72 , 176-34-023 packing sheet, lv1/r72 , 172-47-122 gasket, lv1/r72 , 5340176550 clip (drg no 54-03-61sb-a), lv1/r72 , 175-45-085 buffer, n1/r72 , 1015-004271 inner cover (mounting), lv1/r72 , 9 g 8-383-065 spring, lv1/r72 , 175-51-048 cover, lv1/r72 , 5110007414 saw crosscut (drg no 172-91-100sb), lv1/r72 , 5110007350 bench axe (drg no 54-28-1875), lv1/r72 , 5120423879 wrench handle, lv1/r72 , 219-09-592 spring, lv1/r72 , 5310214035 nut (drg no 520-02-001-06), lv1/r72 , 520-10-009 gasket 26x95, lv1/r72 , 175-91-077sb adapter with hose, lv1/r72 , 5330016987 gasket (drg no 176-32-006), lv1/r72 , 432-70-639 gasket, lv1/r72 , 154-015 cap, lv1/r72 , 5pm-573-008sb plug assy sh plm-3, lv1/r72 , 5310-018461 nut m8 (drgn no 520-02-001), lv1/r72 , 175-60-003sb pipe, lv1/r72 , 4730078023 clamp (drg no 175-33-303), lv1/r72 , 5330022946 gasket 20x40x160 (520-10-008-29), lv1/r72 , 4030003712 shackle with pin ( drg no 172-91-277sb), lv1/r72 , 5310238285 nut m8x1 (drg no 520-02-008-3), lv1/r72 , 155-38-200a seal, lv1/r72 , 172-31-148/1 gasket, lv1/r72 , 5330381660 ring (drg no 172-70-335), lv1/r72 , 5310-236951 nut (drg no 172-04-243-1), lv1/r72 , 175-70-343 cap upper, lv1/r72 , 432-40-089-1 gasket, lv1/r72 , bmto-1-39.005 sb support, lv1/r72 , 54-30-1321-1 washer, lv1/r72 , 172-11-064 ring packing, lv1/r72 , 5310251771 washer (drg no 175-37-060), lv1/r72 , 155-38-480 ring packing, lv1/r72 , 175-45-083 ring packing, lv1/r72 , 54-38-132 collar, lv1/r72 , 166-26-175 ring packing,

CTN :40556413

16 Jun, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of bar locking slider to part no. 2a42.01. 058 (c1058) dscat no. 3020-001584 (with firm's material) dc.

corporations/Associations/Others

CTN :39336332

02 Jun, 2025 NA

Cuddalore - Tamil Nadu

Tender For bid to ras supply of modified rotor locking bar , hard faced rotor lock plate cleat

Co-operative

CTN :40475982

02 Jun, 2025 5.35 Lacs

Jaipur - Rajasthan

Tender For 12 g choti gss godawn consttruction item - profile sheet 0.8 mm th isi marked (with zinc coating not less than 275 gm/sqm , plan sheet .8 mm th isi marked (with zinc coating not less than 275 gm/sqm-(guter sheet), , 3" dia round ms pipe (isi marked), , 1.25" dia round ms pipe (isi marked), , 1.5 "x3" rectanglar ms pipe marked) (isi, , angle 2.5"x2.5"x1.5 soot th or 65mmx65mmx5mm), , screw 12x55 no 2.25" long with washer, , welding rod 10no, , enamel paint black (isi marked), , cement paint (snowcem), , white wash (lime), , roller shutters of approved make, made of 80 x 1.25 mm. m.s. laths interlocked together through their entire length, inside and outside locking with push and pull operation,including cost of spring hooks, wire spring grade no. 2 and m.s. top cover 1.2 mm thick, , window (z section + mullion), , ventilator (z-section), , steel sq bar, , unplasticzed poly vinal chloride (upvc)pipe type b (is13592 :1992 marked) 110 mm dia, , unplasticzed poly vinal chloride (upvc)pipe type b (is13592 :1992 marked) 110 mm dia bend, , cutter wheel (5")

Co-operative

CTN :40476121

30 May, 2025 5.30 Lacs

Jaipur - Rajasthan

Tender For 94 takhthajra gss ltd godawn item construction item - profile sheet 0.8 mm th isi marked (with zinc coating not less than 275 gm /sqm , plan sheet .8 mm th isi marked (with zinc coating not less than 275 gm/sqm, , 3 dia round ms pipe (isi marked), , 36 on, , 14, , 1.25" dia round ms pipe marked) (isi, , 1.5"x3" rectanglar ms pipe (isi marked), , 12, , 80, , 8, , w, , angle 2.5"x2.5"x1.5 soot th or 65mmx65mmx5mm), , screw 12x55 no 2.25" long with waser ( make tata), , welding rod 10 no, , cement paint (snowcem), , white wash (lime), , enamel paint black (isi marked), , ventilator (z-section), , window (z section + mullion), , steel sq bar, , roller shutters of approved make, made of 80 x 1.25 mm. m.s. laths interlocked together throgh their entire length, inside and outside locking with push and pull operation, including cost of spring hooks, wire spring grade no. 2 and m.s. top cover 1.2 mm thick, , air fan 24" dia with fiber sheet base, , unplasticzed poly vinal chloride, , (upvc) pipe type b (is13592:1992 marked) 110 mm dia, , unplasticzed poly vinal chloride, , 10 (upvc) pipe type b (is13592:1992 marked) 110 mm dia bend

CTN :40469270

14 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - rock breaker with chisel and moil(ref-xxxiac-1) , head front(ref no-a3-5-3) , turbo charger 1 h1 rh b-6(plate-z1 oblique 1) , cap screw (ms sl-245) , joint for del volute , bulb 12v 10w (feston) , wrench bar 6 , wrench bar 08 , by pass hose(ms-173) , o ring , adaptor , de spanner 16x17(jcb super, plate-v11d) , inner cable(d3-1-5) , bolt(plate xxxi c) , plate friction clutch (ctlg 3dx e5-1-30) , joint (for rocker cover)ms-162) , male cone blacking plug set (smt sl-09) , tooth point (ispl plate-k04) , bush (cat 3dx a2-1-1) , triple lip seal (f5-1-20) , wiper assy front(item no -955) , push rod(r2) , hose top(p4-4-2) , o ring for cyl liner(ms-157) , hose(e3-13-1) , plug water jacket(r2) , hose air induction , seal kit, steer ram(ms-464) , pin pivot(plate-a1-7-2) , hose 1 by 4 inch x 1 by 4 inch bspx1200 long , hose(plate-e1-13-1) , hose(e1-1-2) , tooth (ispl plate-i03) , door handle lh(plate -iv n-9) , joint, liner to head, 0.4mm thk , hose (e1-8-11) , rear frame hose retainer(ispl-938) , hose , fan face level 12v (c1-17-1) , throttle cable assembly (jcb super plate xi a) , hose 08 bsp hp 1910mm a , hose(plate-e1-9-15) , hose (1 by 2 inch bspx1 by 2 inch bspx1130mm long , hose 4 wd rh , gasket cyl head(plate-xxxiii a) , glass tinted left side(plate iv r-4, 379) , hose l h , hose(3dx ctlg e1-9-2) , window tinted glass rh(jcb super,366) , hose(sl-36922, price list) , hose , dowel(r2) , hydraulic hose (ispl plate-f01) , adjuster auto tensioner(plate-xxxviii a1) , nozzle(ms sl-574) , parkbrake caliper g.a (ispl sl-1691) , pin pivet 600mm wind jaw (ref-xxxif) , track rod end gaiter(f1-30-10 by 1a) , hose(plate-e1-9-12) , valve inlet , tool chisel(sl no-2351) , cap filter , universal driveshaft , pressure gauge kit with snap(smt sl-01) , cyl head sub assy , joint knukle swivel(f1-6-10) , grommet , self lubricating brg , leak off hose(ms-152)( plate no- p4-4-2, sl no-9) , nut castle m 20x1.5(f1-30-10) , spring brake shoe(ms-188) , strip 1260 mm long (jcb ms sl no 40) , gasket(ms sl-31) , interrior light (ispl-585) , plate door catch , oil seal 115x140x16 cr make(4r1040t ispl -oil seal , bearing bush ce(ms-189) , rubber hose(plate-l1-4-10) , bolt for con. rod(ms sl-545) , seal (r1 spare) , wiper blade(ms-79) , cap radiator , hose bottom radiator(p4-4-2) , oil ring , fuel filter element pre i 1 (mico no.1457431003) , sealing bush(ms-185) , pin pivot , fuel filter(plate-xxxviig, sl no-2538) , radiator assembly turbo , grommet cable harness( plate no- d1-21-2, sl no-17 , bulb 5 w , 10 amps fuse , de spanner 10x12 mm(plate-vii d -27) , wear pad(ms-27) , ring spanner 18x19mm(ispl sl-563) , screw driver 10 inch by 9 , o ring , female cone blanking plug set (smt sl-08) , friction plate(f5-3-40) , filter fuel secondry(amendment no1,ms-199, jcb 3dx , pipe fuel(plate-t, 44tc) , oil filter (ms sl-386) , ring sealing for bowl(ms sl-563) , gaiter hand brake , hose pipe for breather(ms sl-555) , hose - 4wd(ms-106) , hose(ms-97) , pivet pin alloy steel (ms sl-17) , lh lock assy(ms sl-49) , piston seal assy , working light(ms sl-94) , filter pre cleaner assy , pivot pin( ms sl no-10) , brush set(ms-194) , element , universel joint , piston seal(e4-1-6) , field coil assy(ms-195) , hydraulic hose (ms sl no 1789) , brake pad ga (ispl sl no-1695) , flange spanner for locking pinion mut(smt sl-04) , valve exhaust , silencer exhaust turbo(ms sl no--148,apr-2015) , solenoid switch , excavator valve (ispl plate-e3-6-1) , filter element, hyd oil(ispl plate-f06) , starter motor (item no- 76) (jcb super plate xx , fip 68 kw bs ii(item no-54) , arm loader short(ref no-b3-1-1) , axle arm & wheel hub assy (plate- xixb) , turbocharger 68 kw(ac)t3(plate- xxxix a-2544)

Central Government/Public Sector

CTN :40485474

11 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply and installation of ats distribution board of dimension 700 x 1600 x 365 mm. the en closure should be made of glass-fiber reinforced polyester (grp) enclosure ingress protection of ip66 (iec 60529) & mechanical impact strength of ik10 (iec 62262). enclosure is having double-insulation (iec 6043 9-1) & is also uv stabilized (iec 62208). material is self-extinguishing (upto 960 degree c - iec 60695-2). o perating temperature ranges from -30 degree c to +120 degree c (iec 60670). rated ac voltage of 1000v and rated dc voltage 1000v . the enclosure gasket materials shall be injected polyurethane. the enclosur e having 180-degree door opening and double bar key locking arrangement. incomer: 185 sq.mm busbar type terminal block - 8 nos for eb and dg incomer with 230v ac r, y, b indicating lamp. 400a fp automati c transfer switch motorized with inbuilt lcd controller and outgoing: 185 sq.mm busbar type terminal blo ck - 4 nos - provision for termination of 185 sq.mm cable in incomer from the top side and 185 sq.mm cabl es for outgoing from the bottom. the manufacturer should submit all the test certificates in accordance wit h iec 61439, routine test report must be made with - high voltage test, insulation resistance test, function al test. the wall mounting frame should be made of hot dip galvanized materials. acceptable make : ca pe/ famatel/hensel/rittal/abb with following switch gear and terminals fixed in the junctio n box as per drawing enclosed. terminal block make: connect well/ elmex switch gears mak e shall be abb/l&t /eaton/siemens,havells, c&s. terminal block makes:connect well/ elmex. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40473076

18 Jun, 2025 NA

Bilaspur - Chhattisgarh

Tender For supply of m.s. plate (2 nos.) (locking bar assembly) required for 1:8.5 tws turnout as per rdso drawi ng no.-rdso/s-3462a & rdso/s 3404a, as per drawing attached along with all the insulation required (2 no s. insulation plate, 4 nos. nylon washer & 4 nos. nylon bush). [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40473079

18 Jun, 2025 NA

Multi City - Multi State

Tender For supply of m.s. plate (locking bar assembly) required for 1:8.5 tws turnout as per rdso drawing no.-r dso/s-3462a & rdso/s 3404a, as per drawing attached along with all the insulation required (2 nos. insula tion plate, 4 nos nylon washer & 4 nos nylon bush) [ warranty period: 30 months after the date of deliver y ]

Copper Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

corporations/Associations/Others

Co-operative

Co-operative

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector