Latest crusher motor Tenders | Government crusher motor Tenders

Central Government/Public Sector

CTN :40529455

23 Jun, 2025 NA

Bhusawal - Maharashtra

Tender For supply of impeller for t.m. blower type mlbr 42-5-1-44 vmt (flakt make) as per drg. no. elw/bsl/ wam4/3/124.274 alt-1. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40500119

05 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of aluminium impeller for oil cooling blower unit, centrifugal design for 3 phase locomotives as per rdso spec no. rdso/2016/el/spec/0123. rev 0 issued on 05-10-2016 and drawing number: rdso/201 6/sk-6/el/spec/0123. material is to be procured from clw approved sources. [ warranty period: 30 mont hs after the date of delivery ]

CTN :40500828

07 Jul, 2025 NA

Sundergarh - Odisha

Tender For supply of spare impeller without duct & cone for smoothing reactor blower motor to clw's spec. no.-clw/es/b-14/c. [ warranty period: 24 months after the date of delivery ]

State Government

CTN :40227801

10 Jun, 2025 49.58 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : various routine/preventive and breakdown maintenance work on as and when require basis at chp-gtps - replacement of hammer rings for stage ii crusher , replacement of hammer rings for stage i crusher , replacement of screen plate / breaker plate/kick off plate of stage i and ii crushers , replacement of rotor of stage i crusher with disassembling of removed rotor and assembling of new/repaired rotor , replacement of drive end side bearing / pedestal of crusher rotor or complete gear coupling set of crusher or repositioning of dislocated rotor of crusher , replacement of non drive end side bearing/pedestal of crusher rotor or complete alignment of crusher motor with crusher rotor , replacement of broken hammer rings of stage i and ii crushers (stage i crusher up to 12 nos.of hammer rings and stage ii crusher up to 06 nos. of hammer rings at a time) , replacement of rail of rail table of wagon tipplers 1/2/3/4 (in one side full length) , replacement of clamping rubber pads of clamp for wagon of wagon tipplers , replacement of whole resting pads for wagon of side beam of wagon tipplers , replacement of spill plate roller of wagon tipplers , repairing/preparation/ fitting and replacement of hooks/rods/turn buckle, chain, sling rope ,spring assembly etc. of vibrating trays and crusher house trays , spillage control at various locations , miscellaneous cutting/welding work require at various locations , replacement of gearbox in conveyor no. 2a/b,11a/b,12a/b,13,14/15,16a/b,17a/b ,18a/b,drc/apron/rg/,wagon tipplers,stacker-reclaimer , replacement of gearbox in conveyor no.,5a/b,8a/b,10a/b,shuttle conveyor 1/2,belt feeder 1/2 ,roller screen, mrc 3/4/5,wobbler feeder ,dribble conveyor 1/2 , replacement of slow speed coupling set (two halves) of drive pulley , replacement of coupling bolts and rubber bushes of slow/high speed coupling(input/output coupling ) in conveyor no.2a/b,11a/b,12a/b,13,14/15,16a/b,17 a/b,18a/b,drc/apron/rg/,wagon tipplers,stacker-reclaimer , replacement of coupling bolts and rubber bushes of slow/high speed coupling(input/output coupling ) in conveyor no.,5a/b,8a/b,10a/b,shuttle conveyor 1/2,belt feeder 1/2 ,roller screen, mrc 3/4/5,wobbler feeder ,dribble conveyor 1/2 , replacement/removing/refitting of various size and type of fluid coupling , replacement or removing & refitting of any internal/bearing/input/ output oil seal of various size and type of gear box , overhauling of dismantles old/used gearbox in all respect with fitment of input and output coupling. , replacement of drive pulley , replacement of drive end side bearing of drive pulley or repositioning of dislocated drive pulley , replacement of non drive end side bearing/any side pedestal of conveyor drive/non drive pulley , alignment of motor/ gearbox/drive pulley including decouple/couple of coupling , nut bolt and drive system checking with replacement of broken nut bolt in all 04 wagon tipplers no.1/2/3/4 as per scope , lifting and releasing of gravity take up of any conveyor belt for locking and de locking of belts for other than belt replacement work , loosening and tightening of horizontal type screw take assembly of any conveyor belts for other than belt replacement work , work of dismantling and re erection of new/repaired apron pan from existing apron feeder of wagon tippler , repairing of upper/lower structure/cone plates of damaged/bend apron pan , replacement of carrying roller of apron feeder , replacement of worn out/ damaged ti roller and garland rollers. , replacement of worn out/ damaged impact rollers , replacement of worn out/ damaged return rollers , replacement of various worn out/ damaged ti roller stands , replacement of various worn out/ damaged impact roller stands , replacements of various worn out/ damaged return roller stands , replacement of various worn out skirt rubbers [10 m each] and skirt rubber with angle , preparation and replacement of guide rollers with bracket in place of worn out/ damaged gu

Central Government / Public Sector

CTN :40475369

18 Jun, 2025 NA

Secunderabad - Telangana

Tender For supply of aluminium impeller for centrifugal type oil cooling blower as per clw specification no. clw/es/3/0647 alt- e or latest and clw drawing no. clw/es/3/sk1/0649 or latest. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40468582

13 Jun, 2025 8.56 Lacs

Ganjam - Odisha

Tender For supply of impeller for sillimanite dryer cab of model spqzn-010 dricect drive lvu. , impeller for illimanite s.dryer cab-2 of model spqzn-010 dricect drive rvu. , impeller for rutile s.dryer cab of model spqzr-010 dricect drive lvu. , impeller for middling s.dryer cab of model spqzr-010 dricect drive rvu. , impeller for msp fbd cab of model spqzr-015 dricect drive lvu. , impeller with finished hub bore for combustion blower model hpt-44 10 driect drive rvu. , impeller with finished hub bore for dilution blower model sp-36 50 driect drive rvu. , impeller with finished hub bore for exhaust blower model cb-16 50 with complete shaft assembly. rvu , impeller with finished hub bore for combustion blower model spqzv-050 driect drive lvu.

Central Government/Public Sector

CTN :40446684

14 Jun, 2025 10.46 Crore

Sidhi - Madhya Pradesh

Tender For procurement of spares of 20 90 draglines - shock absorber, part no.10302717 , packing washer, part no.10400734 , thrust ring, part no.10400953 , coupling hyd. pump and motor, part no.1055525042 , bushing, part no.10586415 , stud, part no.10586435 , nut 10600201, part no.10600201 , thrust washer, part no.10600710046 , gear shaft, part no.106007101 , ring, part no.106007102 , pinion shaft, part no.1060071031 , flange, part no.106007105 , washer, part no.106007106 , bushing, part no.106007107 , bushing, part no.106007108 , flange, part no.106007109 , bushing, part no.106007110 , washer, part no.106007120 , copper rivet, part no.1060077153 , thrust washer, part no.10600910093 , stud, part no.106009105 , stud, part no.10600910501 , pinion shaft, part no.10600912 , cleat, part no.10601104 , cleat, part no.10601105 , cleat, part no.106011170 , coupling half, part no.106018105 , copper rivet, part no.1060185022 , air cylinder, part no.106018550 , repair kit air cylinder, part no.1060185503 , swing hook wedge strap, part no.106020103 , copper gasket, part no.106023300217a , shoe hold cylinder, part no.10602401sb , coupling bolt, part no.10602520028 , nut, part no.10602529 , shoe support bracket, part no.10602701 , half coupling, part no.10602901 , coupling pad, part no.10604200235 , half coupling, part no.106029101 , bolt, part no.1060615551 , bolt, part no.1060615553 , nut, part no.1060615554 , nut, part no.1060615552 , drag pulley, part no.10606401 , roller assy., part no.1060710301 , coupling bolt, part no.106086100122 , repair kit air cylinder, part no.1064077503 , air cylinder, part no.106407750sb , copper gasket, part no.1064245014 , locking plate, part no.106502031 , cover, part no.10650209 , copper gasket, part no.106523001204 , strap rope liner, part no.110316421 , pressure guage, part no.1103800000000000 , impeller, part no.56c03602412 , blower impeller of drag or hoist, part no.56c43602412 , blower housing assy., part no.56c43602413 , impeller, part no.56c83602412 , clamping gear, part no.5bs09048801 , brush holder, part no.5bs11211706 , coupling pin, part no.8bs27739501 , half coupling, part no.bg1123a5 , cup packing, part no.m3003402 , electrical distributor, part no.pt11120 , hydraulic pusher, part no.te25t2 , air solenoid valve, part no.vv325h , bushing, part no.10606408 , roller assy, part no.1060710302 , blower housing comp assy., part no.56c03602413 , non-return valve e155ash, part no.e155asb , safety valve for stage 1, part no.k5a0405000 , washer thrust, part no.10041111 , roller, part no.10580209 , stud, part no.10600910502 , stud, part no.10602160018 , nut, part no.10602160019 , section, part no.106072302 , dump pulley, part no.106061555 , section, part no.106072301 , section, part no.106072303 , section, part no.106072304 , stand, part no.10650221 , stand, part no.10650222 , guide, part no.110316401 , axle, part no.10606142 , ring, part no.10650206 , ring, part no.10650210 , pinion shaft lh, part no.106009121 , half coupling, part no.1060181051 , clamp, part no.106061594 , compressor without motor, part no.4vu159m4 , rib assembly, part no.10606140029

Central Government And Public Sector

CTN :40459608

07 Jun, 2025 NA

Bilaspur - Chhattisgarh

Tender For supply of impeller for machine room blower as per clw spec. no. clw/es/3/0020 alt - g or latest if an y. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40461339

04 Jun, 2025 NA

Raipur - Chhattisgarh

Tender For supply of spare impeller without duct & cone for smoothing reactor blower motor(mv sl) to clw's spec no.clw/es/b-14. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40434519

12 Jun, 2025 NA

Bhusawal - Maharashtra

Tender For supply of set of impeller and cooling blower dome/duct for traction motor (one set c onsisting of 02 items 02 nos) as per clw specification no.clw/es/b-14 alt-c, drg.no. clw/es/s k-2/b-14 alt-b. [ warranty period: 30 months after the date of delivery ]

Crusher Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors