Get complete information related to latest Demolition Repair Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Demolition Repair Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Demolition Repair Tenders.
Tender For demolishing hutments, dismantling and recovery of materials as per scope of work, shifting of all unserviceable materials and assets from old gopalpur camp to excavation workshop basundhara
Tender For regarding the work of demolishing the old 5 (five) room property located in the premises of kathodara primary school at kathodara village included in the new east (sarthana) zone, transporting the goods and leveling the land.
Tender For this estimate include demolishing brick work manually dismantling tile work demolishing brick tile providing and fixing i st quality ceramic glazed wall tiles providing and fixing anodised aluminium grill brick work with common burnt clay fps 12 mm
Tender For corrigendum : additional / alteration of renovation of old dc office building to central state library solan (deposit work) (sh:-dismantling & demolishing work, civil work and water supply & sanitary fitting )
Tender For construction of hall and supplying gym items for pinto youth club of baradi in velim constituency under mla-lad scheme (re-tender). - demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead., demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead., laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement., extra for laterite masonry in all sizes in superstructure from floor i level upto floor v level., 12mm cement plaster 1:4 (1 cement : 4 fine sand), providing and fixing 1st quality ceramic glazed wall tiles (johnson somany kajaria ) conforming to is:15622 (thickness to be specified by the manufacture of approved make in all colours shades except burgundy bottle green black of any size as approved by engineer-in-charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete.;wall ceramic glazed tiles : 300 x 600, providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of johnson somany kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to is: 15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete;dark shades, proving and fixing white vitreous china wall hung type (european type) water closet with seat and lid with c.i. brass hinges and rubber fittings with flush valve nelson/ similar fully chromium plated with stop cock wall flanges flush pipe or elbow and vaccum breaker coupling etc. including chair bracket/rag bolts cutting & making good the walls and floors where required and concealed seat support - w.c. pan with white plastic seat and lid, providing and fixing brass stop cock (heavy) of approved quality :;15 mm nominal bore, providing and fixing brass full way valve (heavy) duty with wheel of approved quality :;20 mm nominal bore, providing and fixing p.v.c. connection pipe with brass unions 15 mm nominal bore:;45 cm (18 ) length ., providing and fixing rigid pvc s.w.r. (soil waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:; 110 mm dia, providing and fixing rigid pvc bend (approved make) for s.w.r. pipes including lubricating etc complete bend with door :; 100 mm dia, providing and fixing nahani trap of rigid pvc (approved make ) for s.w.r. pipes including lubricating etc complete without door :;110 mm dia, providing and fixing nickel chrome plated copper alloy fancy bib cock short body jaquar make or equivalent.confirming to is 8931; 1993;15mm nominal bore, providing and fixing chlorinated ployvinyl chloride (cpvc) pipes confirming to is:15778 having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. this includes jointing of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of the engineer-in-charge. concealed work (medium duty sdr 13.5 pipe) including cutting chases and making good the walls etc.;20 mm dia nominal outer dia pipes., providing and fixing hand shower (health faucet) with 8mm dia abs/brass body with double lock 1.00 m long flexible tube (brass plated stainles steel flexible hose) and wall hook of approved quality confirming to is standards., frp (fiber reinforced polymer) frames with wood finish manufacture supply and installation (with anchor fastener) of epee or equivalent goan make frp (fiber reinforced polymer) frame of cross section as per options below with right angle joint and frp (fiber reinforce
Tender For repair, maintenance, and installation of plant/ systems/equipments (version 2)-g-schedule for pre monsoon repair & maintenance of g.d. site at sandalpur the. khategaon, dist. dewas for the year of 2025-26- 1 ordinary shrub jungle (area below 25% covered by shrubs) clearance involving removal of grass, shrubs, bushes and twigs including rooting out & disposal etc. complete. (wrd sor 9.01/p. 133) 53000 sqm., 2 fly levelling for fixing temporary bench marks (wrd sor 1.08/p.8) 2 k.m., 3 chain and compass survey (wrd sor 1.06/p. 8) for headworks (wrd sor 1.06.1) 1.5 k.m., 4 levelling for canal works (wrd sor 1.10/p. 8-9) below 15 m interval for command survey and canal survey, including survey for c.d. work (wrd sor 1.10.1) 2.5 k.m. 0 0 5 maintenance of gravel road including making up the loss of profile, rectifying corrugated surface, filling up of depressions, pot holes and erosion gullies by adding fresh material and compacting it with appropriate equipment or to strip excess of material from the road surface as per drawings and technical specification clause 1906 (mprrda sor 15.4) rate per sqm for depression upto 7.5 cm 5500 sqm. 0 0 6 fencing with r.c.c. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum) between the two posts fitted and fixed with g.i. staples on wooden plugs or g.i. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of r.c.c. posts, struts, earth work and concrete to be paid for separately) with gi barbed wire. (pwd sor 10.31/ 312) 1050 m. 0 0 7 demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of engineer -in - charge. (pwd sor item no. 15.2/p. 523) nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). (pwd sor item no. 15.2.1/p. 523) 4.55 cum. 0 0 8 fabrication and installation of reinforcement cement concrete gauge post of size 15 cm x 10 cm (one side tapered in 5 cm length) made with m - 15 concrete mix (with aggregate 20 mm nominal size) 1.80 m long. at river banks including cost of civil works in foundation embedded in m -15 reinforced cement concrete pedestal block of size 60 cm x 60cm x 60 cm including the of steel reinforcement, centring, shuttering, finishing, reinforcement over the m -7.5 (with aggregate 40 mm nominal size) cement concrete base of size 80 cm x 80 cm x 15 cm with 12 mm thick plastering complete and marking the gauge with synthetic enamel with standard metric gradation of 5 mm thickness in black & white alternately & red synthetic enamel of 5 mm width at every 100 mm etc complete (center line) (wrd sor 1.30/p. 13) 26 each 0 0 9 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level : (pwd sor 4.1/p. 40) m-15 grade concrete (4.1.1.3) 14.76 cum. 0 0 10 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer -in - charge) 0.50 mm + 0.05 %, total coated thicknesswith zinc coating 120 gsm as per is: 277 in 240 mpa steel grade, 5 -7 micronsepoxy primer on both side of the sheet and polyester top coat 15 -18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by engineer -in - charge. the sheet shall be fixed using self-drilling /selftapping screws of size (5.5x 55mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (pwd sor item no. 24.11/p. 725 -726) 34 sqm. 0 0 11 providing and fixing precoatedgalvanised steel
Tender For improvement/ development of mcd flat no c-3 by plastering, demolishing, painting, wooden work, m.s steel work, fibre shades, door and window repairs, aluminium work, plumbing work, distempering etc. in r-block in ward no.-173 (greater kailas
Tender For restoration of damage/ construction of govt. high school building at buhar (in gp paploa) (sh:- repair of class room i/c demolishing of cement concrete, door, window & p/f door windows shutters, plaster work, tile work and distempering etc.) deposit work.
Tender For zone no. 32 (road zone- lc gates and station approach road etc.) under aen/bdc under the jurisdiction of sr.den/1/hwh. [description: overall percentage above/below/at par over the rates of cpwd-dsr-2021 items of engineering department on all chapters with up to date correction slips etc. [value rs. 5610000.00] note: 1. the tenderer is to quote only one rate against the tender. the advertised value is the departmental assessed value. 2. the departmental assessed value/advertised value has been chalked out considering at par with the basic cost of cpwd-dsr-2021 items. this denotes that no escalation over the basic cost has been considered in firming up the assessed cost for the instant tender. 3. for firming up the assessed cost/advertised cost of this zonal tender, contribution of i) earth work- 4% in chapter no. 2, ii) mortar- 2% in chapter no. 3, iii) concrete work- 4% in chapter no. 4, iv) masonary work- 4% in chapter no.6, v) steel work- 5% in chapter no. 10, vi) dismantling and demolishing- 1% in chapter no.15, vii) road work- 80% only 4. during execution, the respective schedules from the above mentioned percentage may be varied, if necessary is felt, with the approval of the competent authority. finance vetting if warraned, may also be sought for in this context. 5. the above instructions are only for guidance to the tenderers. tenders should consider the above aspects while quoting rates. 7) tenderers while quoting rates should quote the rates % above/below/at par w.r.t. the assessed/advertised value, as reflected against the respective schedules, considering escalation and effect of gst and other taxes as applicable.