Web Analytics Made Easy - StatCounter

Drift Eliminator Tenders

Get complete information related to latest Drift Eliminator Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Drift Eliminator Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Drift Eliminator Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :41241318 Due date: 13 Aug, 202513 Aug, 2025 NA
Tender For supply of drift eliminator, pvc, w-34,drift eliminator, pvc, w34, 5400x3700x170mm

Central Government/Public Sector

CTN :41243292 Due date: 08 Aug, 202508 Aug, 2025 NA
Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; retrofitting of 2 nos cooling water pump; as per scope of work

CTN :40825759 Due date: 31 Jul, 202531 Jul, 2025 NA
Tender For corrigendum : supply of compressor spares - plug , stud screw , stud screw , key fitting , deep groove ball bearing , ring , ring rectangular , adaptor sleeve , vent valve , spring valve suction i stage , thermometer , suction valve plate iind stage , spring valve suction ii stage , stud adaptor , pressure control device , connecting rod bearing , piston pin bushing , cylinder head packing 1st stage , cylinder head packing 3rd stage , cylinder head packing 2nd stage , cylinder with head and valve 3rd stage , filter element , cyl dia50 m/c hp03/05 , cyl dla 100 m/c ts05/07 , cylinder dia 60 , head dia 100 cyl m/c ss07/10 , flat valve dia70 cyl ss02/03 , inter cooler hp m/c ts02/03 , valve flat 60 dia , valve finger type dia50 cyl , valve plate dia 60 cylinder , gasket 0.75 c/case to cyl ts 02 , gasket 50cyl to valve flat , piston assy 100 ss/ts 07 , slotted oil control ring , seat felt dia83xdia126x1. , nipple hex 3/4bspx60 hp 07/10 , ring pkg dia50 cyl i/l , bearing 6307 , hex. bolt m6 x 20 , circlip internal 18 , o-ring , angle thermometer 0-100 , lp-hose , hp-hose , hose pipe , suction filter , solenoid valve , intake oil filter , solenoid valve for colling water , lp-hose , non-reture valve , coil for solenoid valve , repair kit for cooling water pump , service kit for cooling water pump , hd-hose , coil , angle thermometer (0-250 c) , air filter , connecting rod bolt , connecting rod 1st stage , piston 2nd stage , temperature supervision , crank shaft , 24v dc relay 2c/o with led and base along with clamp , triple pole miniature circuit breaker rated 2a a9n3p02c , smps, 150w, i/p - 230v ac, o/p - 24v , drive end bearing , free end bearing , motor fan , double pole miniature circuit breaker rated 4a a9n2p04c , selector switch 2 maintained position with 1no contact xb5- , indicating lamp integral led white, 24vdc , indicating lamp integral led green, 24vdc , indicating lamp integral led red, 24vdc , shrouded pushbutton yellow colour with 1no contact , shrouded pushbutton red colour with 1no contact , shrouded pushbutton green colour with 1no contact , mushroom turn release pb red colour with 1nc contact , indicating lamp integral led blue, 230vdc , fuse terminal block 6a with csfl4u(1a,2a) fuselink , filter assy i/l air dry a type , filter assy i/l air b type , valve assy b , akcc-60/60 rfpl avm , motor bearing drive and free end , air dryer replacement cartridge , drive end bearing , free end bearing , motor fan , pre-filter element (fhp420xa) , display unit for dew point meter , molecular sieve (xeachp26011) , water resistant pearl (xeachp26010) , filter element for hp100s055sdb , filter element for hp100m010 (fhp730x25) , pipe after cooler , o-ring base , cooling fan 7.6 hp &10 hp , manual drain complete valve seat , manual drains seat , safety valve 300 bar , shaft ball bearing , oil seal , o-ring crankcase , o-ring screw back cover crankcase , bearing seal gasket , piston rings set 1st stage , reed valve set 1st stage , piston pin 2nd stage , piston rings set 2nd stage , inlet valve 2nd stage , o-ring discharge valve 2nd stage , gasket down reed valve , gasket up reed valve , piston sleeve 3rd stage , piston pin 1st & 3rd stage , cylinder gasket i60 , piston rings set 3rd stage , lock ring piston pin , o-ring piston sleeve 3rd stage , discharge valve 3rd stage , inlet valve 3rd stage , o-ring discharge valve 3rd stage

Central Government/Public Sector

CTN :41209540 Due date: 04 Aug, 202504 Aug, 2025 NA
Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; the job of services (supervision and labour supply) for cooling tower structural repair and maintenance work; buyer

State Government

CTN :41189579 Due date: 12 Aug, 202512 Aug, 2025 8.09 Lacs
Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi

Central Government/Public Sector

CTN :41135708 Due date: 29 Jul, 202529 Jul, 2025 NA
Tender For providing of custom bid for services - custom bid for services - capital repair of ccm-3 for year (2025-26); 1 4004302264 re-fixing of mould oscillators after cleaning/ survey in ccm-3 6 each, 2 4004314713 overhauling of withdrawal and straightening unit during capital repair in ccm-3 6 each, 3 4004315032 alignment of rollers of roller table along with rectification of base frame and grease line and resumption of water connection. each set consists of 38 rollers 4 set, 4 4004303661 proper cleaning of ducts of steam exhaust fans and fixing of bellows along with impeller cleaning bearing checking etc 2 each, 5 4004242462 replacement of cld rails with clamps towards mill side and overhauling -checking of lifting & travelling movement including oil changing of gear boxes 25 each, 6 4004314710 complete acid cleaning of machine cooling heat exchanger of ccm-3 2 each, 7 4004314709 complete acid cleaning of mould cooling heat exchangers in ccm-3 2 each, 8 4004303662 re-routing/replacement of pipe at different location of ccp#3,ss pipe dia < 150mm 75 meter, 9 4004303664 re-routing/replacement of pipe at different location of ccp#3,cs pipe 150 < dia < 500 100 meter..

Central Government And Public Sector

CTN :40863437 Due date: 28 Jul, 202528 Jul, 2025 69.13 Lacs
Tender For corrigendum : maintenance and testing of gate, globe, butterfly and check valves at hwpk during mta -2025. - valve dismantling, inspection, maintenance, replacement of consumables and worn out components, manual actuator servicing, final leak testing and painting etc for following sizes valves:, 1" nb & 1-1/2" nb gate/ globe/ check valve, 2 nb & 3 nb gate/ globe/ check valve, 4 nb & 6 nb gate/ globe/ check valve, 8 nb & 10 nb gate/ globe/ check valve, 12 nb gate/ globe/ check/ butterfly valve, 14 nb gate/ globe/ check/ butterfly valve, 16 nb gate/ globe/ check/ butterfly valve, 18 nb gate valve gate/ check/ butterfly valve, 24" nb butterfly valve, removal of screwed seat rings, repair of damaged threads and re-fixing of repaired/new seat ring of following sizes & class (removal of seat ring involved 3-4 cycles of heating and cooling and heavy torquing) (unit is nos. of seat rings):, 6" nb to 12"nb gate/ check valves, 14" nb to 18"nb gate/ check valves

Co-operative

CTN :41126755 Due date: 01 Aug, 202501 Aug, 2025 NA
Tender For corrigendum : supply, installation, testing & commissioning of evaporative condenser air inlet louvers and drift eliminator work at our navapura plant

Central Government/Public Sector

CTN :41141851 Due date: 18 Aug, 202518 Aug, 2025 1.26 Crore
Tender For comprehensive repair / maintenance of chillers, ahu unit, cooling tower, compressor, condensor, expansion valves of ac plant alongwith allied b/r wks of zone iv locations of nad non explosive area at naval station karanja

Central Government/Public Sector

CTN :41122653 Due date: 16 Aug, 202516 Aug, 2025 82.00 Lacs
Tender For comprehensive repair / maintenance of chillers, ahu unit, cooling tower, compressor, condensor, expansion valves of ac plant alongwith allied b/r wks of zone viii locations of tunir area at naval station karanja
 Loading, Please wait...

Connect us via What's Up