Latest drill panel spares Tenders | Government drill panel spares Tenders

Central Government/Public Sector

CTN :44842218

04 May, 2026 NA

Chennai - Tamil Nadu

Tender For lwscz shell kit (a) lscz - one coach set of roof, 2 mm sidewall and end wall for lwscz coaches. 1) sidewall assembly to drg.no. (329) icf/sk3-1-4-091, alt 'b' , col- 1 - 1 no. 2) roof assembly to drg.no. (lwscz) 73916001, alt 'd', col-i - 1 no. 3) end roof assembly to drg.no.(ls) 58116066, alt 'h', col-i - 2 nos. welding pin to drg no 81410012 alt nil to be assembled on roof and sidewall 4) endwall to drg.no. (lslrd) 74115001, alt 'j'-2 nos. the firm shall fulfil the requirement as per icf//md/specn.200, issue status 01, rev 04 with amendment no. 01. the firm shall fulfil the requirement as per icf/md/spec-315, issue status-01, rev.00, amendment no. 01. firm has to supply roof and sidewall without applying etch primer. (b)one coach set of body shell items and partition frames for lwscz2(814) coaches to drg nos, 1. 81410002, alt nil- 1no. 2. 81410005, alt 'e'- 1 no. 3. 58210036, alt 'b'- 2 nos. 4. 67010011, alt 'a'- 2 nos. 5. 58110017, alt 'c'- 2 nos. 6. aag10457, alt nil- 4 nos. 7. aab10338, alt nil-16 nos. 8. 58110015, alt 'a'- 6 nos. 9. 58110016, alt 'a'-3 nos. (c) under frame arrangemnt to drg no. 81411001 alt 'f' the manufacturing facility as per icf/md/spec-147, issue status-01 rev.02 with amendment no.02. special condition : a) -packing as per icf/j&t/misc-2201, alt 'e', safety instruction as per icf/j&t/sk-1867, alt. 'nil' -packing as per icf/j&t/sk-1809, alt 'a'. b) - packing condition as per icf/j&t/sk-1865, alt "a". c) packing condition as per drg.no.icf/j&t/misc-2487, alt 'b' the underframe should be supplied as normal side up and side bearer side down. stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly& welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor withcross members to avoid bi-metallic corrossion. [safety item ]

Central Government/Public Sector

CTN :44843152

07 May, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : shell kit for memu dmc2 jk 946 a. roof assembly 94416001 000 01, alt 'nil' - 1 no. location of sidewall 94414001 000 01, alt 'nil' - 1 no. end construction pail end 94615001 000 01, alt 'nil' - 1 no. firm shall fulfill the manufacturing facility as per icf/md/specn-200, issue status 01, rev 04 with amendment no 01. firm shall fulfill the manufacturing facility as per icf/md/specn-315, issue status 01, rev.0 0with amendment no 01. b.supply of one coach set of body shell items and partition frames for memu dmc2 jk 946 to drawing nos: 1. 94410003 000 01, alt 'a' - 1 no 2. 74510257 000 01, alt 'nil' - 1 no 3. 94410004 000 01, alt 'nil' - 1 no 4. 74510045 000 01, alt 'nil' - 1 no 5. 94410005 000 01, alt 'nil' - 1 no 6. 94410002 000 01, alt 'b' - 1 no. 7. 94410076 000 01, alt 'nil' - 1 no 8. 94410072 000 01, alt 'nil' - 1 no 9. 94410054 000 01, alt 'nil' - 2 nos. c. under frame arrangement 94411001 000 01, alt 'a' - 1no. firm shall fulfill the manufacturing facility as per icf/md/specn-147, issue status 01 rev.02 with amendment no.02. special condition : packing as per icf/j&t/misc-2201, alt 'e'. packing as per icf/j&t/sk-1809, alt 'a'. packing condition as per drg.no.icf/j&t/misc-2487, alt 'b' the underframe should be supplied as normal side up & side bearer side down. packing conditionas per icf/j&t/sk-1865, alt 'a'. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion. [safety item ]

Central Government/Public Sector

CTN :44111966

13 Apr, 2026 1.85 Crore

Surat - Gujarat

Tender For corrigendum : supply of outdoor type fixed camera suitable for automatic number plate reading and face recognition and isolation bay monitoring , ptz camera suitable for old apron monitoring , cctv equipments suitable for the smooth functioning of 50 number of cctv cameras in 19 inch floor standing 42u equipment rack , 24 port layer 3 poe network switch with sfp modules fully populated , 24 port layer 2 poe network switch with 4nos sfp ports with sfp modules fully populated , 12 port layer 2 poe network switch with 4nos sfp ports with sfp modules fully populated , media convertor with two number sfp slot and two number sfp giga module , outdoor rack 9u , licensed video management software on main and failover server including vms per chanel license and video analytic per chanel license for 50nos cameras , licensed software for automatic number plate reader camera and driver face capture camera for 40nos cameras , face capture license , automatic number plate reader license , workstation client pc without monitor with vms application including supply of licensed os and antivirus software , 55 inch displays complete with wall or ceiling or floor mounting arrangement , 12 core ofc cable in existing pipe , 25 mm dia hpde pipe pe 63 pn 8 on existing surface or raceway , shielded twisted pair stp category 6 cable in existing pipe , rf link pair suitable for point to point connectivity upto 5 km air distance including all hardware and software and other accessories , utp cat6 io box and 1. 5mtr cat6 a utp patch cord including cat6 cable termination , cat6 stp 26awg patch cord and 1m , 3 inch dia and 5 mtrs height as per site requirement and gi pole class b with all mounting arrangement including civil work , horizontal directional drilling hdd with single run of 25 mm dia hpde pipe pe 63 pn 8 up to a suitable depth , horizontal directional drilling hdd with double run of 25 mm dia hpde pipe pe 63 pn 8 up to a suitable depth , 1main and 1 standby ups with required capacity , 01 kva online ups , 12 way db , 9 way db , 32 amp dp mcb b type with waterproof box , 06 amp sp mcb b type with waterproof box , 3 core 2. 5 sq mm multi strand frlsh insulated pvc sheathed copper conductor power cable in existing pipe , pvc waterproof junction box suitable to house the termination of 02nos cat6 cable and 02nos 3x2. 5sq mm pvc insulated power cable in rectangle case , 4u wall mount network rack , waterproof junction box for media convertor of cctv camera system , 8 channel nvr , itc of above items excluding item no 15 and 16 and 17 and 22 and 23 and 30 , provinding and operating and logging perameters and other routine maintenance of ssctv system , training and documentation

Central Government/Public Sector

CTN :44773633

06 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of under frame arrgt for memu/ndmc2/3ph to drg no. 78211001, alt 'a', col 1. firm shall fulfil the manufacturing facility as per icf/md/spec-147, issue status-01 rev.02 with amendment no.02. special condition : special care to be taken for under slung items while transit, loading and unloading. the underframe should be supplied as normal side up and side bearer side down. packing to drg no. icf/j&t/misc-2487,alt-'b'. details for satge inspection. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weldparameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion. [safety item ]

Central Government/Public Sector

CTN :44747670

27 Apr, 2026 NA

Patratu - Jharkhand

Tender For supply of slack adjuster assembly (upper) to rdso drg. no.-skvl-189 alt.-1 & rdso drg. no.-skvl-190 alt-1 with bushes alone to material mn steel to irs-r65/78. i. item no.03 of rdso drg no.-skvl- 189 alt-1 is required as per clw drg no.06/4/19/147 alt.-1. ii. two nos. of roll pins to ref. no.09 of drg. no. skvl-189 to be fixed by drilling on the block at both sides of the adjusting bolt tail end to create efficient locking mechanism. (item description updated on 07/01/26) [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44687308

08 Apr, 2026 NA

Thane - Maharashtra

Tender For supply of demolition hammer for light duty chiseling in concrete and masonry suitable for wall and overhead structure , demolition hammer for heavy duty chiseling in concrete suitable for floor demolition , cordless hammer drill with wide drilling range, chipping function , cordless angle grinder with variable gear speed for cutting and grinding steel , cordless impact wrench which can be used for bolting steel , cordless reciprocating saw , electric concrete cutter , cordless led construction light with good battery life , concrete core drill machine which can be used for extraction of concrete cores , laser layout instrument , batteries for item numbers 3 4 5 6 8 battery should be of capacity 5ah , batteries for item numbers 3 4 5 6 8 battery should be of capacity 8ah , compatible fast chargers

corporations/Associations/Others

CTN :43675558

28 Mar, 2026 NA

Cuddalore - Tamil Nadu

Tender For supply of item no 1: sm499120205: btr clamp tightening tool as per drg. no. gm/con/mii/49/19 qty: 125 nos , item no 2: sm499120206: drilling tool for btr clamps as per drg. no. gm/con/mii/49/19. qty: 350 nos

Central Government/Public Sector

CTN :44633604

20 Apr, 2026 NA

Chennai - Tamil Nadu

Tender For supply of underframe arrgt for motor coach with bt elec to drg no (574)icf/mrvc/m/bt-1-1-001, col.i, alt 'm' the schedule of technical requirement asper icf/md/specn.147, issue status-01, rev-02 with amendment-02. special condition : 1) the underframe should be supplied as normal side up and side bearer side down. packing drawing icfj&t/misc-2487, alt 'b'. stage inspection detail added. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion. [safety item ]

Central Government/Public Sector

CTN :44456407

22 Apr, 2026 NA

Karaikal - Pondicherry

Tender For corrigendum : supply of connector slip 1-1/4" coil tubing , coil tubing 1.5" ct roll on connector roll on x 1" ammt , crossover 1" mt pin x 1-1/2" mt box , crossover 1- 1/2" mt pin x 1" mt box , connector external dimple 1-1/4" , dimpling tool for external dimple connector 1-1/4" , roll-on x thread connector , check valve double flapper 1-11/16" size , coil tubing down hole filter 1-11/16" bottom hole assembly , coil tubing paraffin wax cutter bit size: 1-11/16" , rotary wash tools 2-1/8" ct size: 1-1/2" ec: 1.5" ammt 5000psi , coil tubing milling tool for 1- 11/16" bottom hole assembly , coil tubing milling tool for 1-11/16" bit size , coil tubing milling tool ct size: 1-1/2" ec: 1.5" ammt od: 57mm , coil tubing drilling motor 1-11/16" , coil tubing drilling motor head assembly 1-11/16" motor , rotary wash tools 1 11/16" size 5000 psi connection: 1" ammt , rotary wash tools 2-1/8" size 5000 psi connection: 1.5" ammt , coil tubing milling tool for 2-1/8" bit size connection: 1.5" ammt , redress kit for item ct motor , ctu 1-11/16" motor assembly , ctu 1-11/16" motor assembly service kit , ctu 1-11/16" motor assembly seal kit , centraliser bow spring flow activated 1-11/16" -6.5 , coil tubing flow activated bow spring centralizer 2-1/8" , coil tubing roto hammer 1- 11/16" , coil tubing 1-11/16" multi jet tool , coil tubing 2.7/8" lead impression block

CTN :44205369

30 Mar, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of battery operated rail drilling machine (engg item)

Drill Panel Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors