Latest drill panel spares Tenders | Government drill panel spares Tenders

State Government

CTN :42813292

23 Dec, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ytps(5x800mw)-supply of t and p items required for stage-i and chp of ytps. - ac/dc volts (40hz to 500hz):4.000v, 40.00v, 400.0v, 1000v; resistance (ohms): 400.0 ohm, 4.000 kohm, 40.00 kohm, 400.0 kohm, 4.000 mohm, 40.00 mohm; capacitance: 40.00nf, 400.0nf, 4.000 µf, 40.00 µf, 400.0 µf, 1000 µf; ac/dc current: 4.000a, 10.00aac/dc millivolts: 400.0mv; diodetest: 2.000v;ip rating: ip40safety: iec 61010-1, iec 61010-2-030 cat iii 600v, cat ii 1000v, pollution degree 2.temperature: 50-400°c, 0-50°c, -55 to 0°c.temperature: operating: 0°c to 40°c;storage: -30°c to 60°celectromagnetic environment: iec 61326-1:portableincluded accessories: test leads with caps, thermocouple, temperature probe, 2 aa batteries, user manual along with the required calibration certificates.gds 18v-400 cordless impact wrench;battery voltage: 18v; torque max: 400nm; no load speed: 0-3,400 rpm. make: boschfluke true rms ac/dc digital clamp meter with iflex probe and fluke connect modelno: 376digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 voltsmegger, 1kvleakage current clampmeter ac, range (0-100a)portable hot air blowervacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hzvibration meter, digital, model: ird 306analog phase sequence indicator, 100 to 500 v, 25 to 65 hzdigital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms-200 kohmsplier, nose, 6"/150 mmhammer, 4 lbcutting plier, 12"39 , gds 18v-400 cordless impact wrench; battery voltage: 18v; maximum torque: 400 nm; no load speed: 0-3,400 rpm. make: bosch. , fluke true rms ac/dc digital clamp meter with iflex probe and fluke connect, model no: 376, , digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 volts, , megger, 1kv, , leakage current clamp meter ac, range (0-100a), , blower, portable hot air, , vacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hz, , vibration meter, digital, model: ird 306, , analog phase sequence indicator, 100 to 500 v, 25 to 65 hz, , digital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms–200 kohms, , plier, nose, 6"/150 mm, , hammer, 4 lb, , cutting plier, 12", , tape, measuring; length: 3 m; material: steel, , tape, 5 meters measuring tape, , tape, 30 meters measuring tape, , hole punch set 22, 20, 18, 16, 14, 12, 10, 8, 6, 4 set of 10 nos (tiger make), , center punch, length: 125 mm, , drilling machine, rated power input: 800w, 240v, drilling diameter in concrete with hammer drill bits: 4-26 mm, , digital motor checker: emc-38, , transformer, auto; type: manual operated variable; input voltage: 240 vac; output voltage range: 0-270 v ac; special features: (dimmerstat) with continuously variable banana terminals, capacity: 20 amps; model: 20d-1p, , transformer, auto; type: manual operated variable; input voltage: 415 v ac; output voltage range: 0-470 v ac; phase: 3; special features: 50 hz; model: 15d-3p, , lux meter, digital, 0-50,000 lux with silicon photodiode sensor, lcd display, dc 9v battery, mandatory accessories, , tachometer, digital; speed range: 9999/99999 rpm; model: v, , digital micro ohm meter, model dmo-100d, , gun, laser, , specifications:, , laser convergence distance: 50" (127cm) ir range: -58 to 3992°f (-50 to 2200°c) emissivity: 0.10 to 1.00 adjustable, , max resolution: 0.1°f/°c, , field of view (distance to target): 50:1

CTN :42588326

18 Dec, 2025 NA

Pune - Maharashtra

Tender For bid to ras bid to ras supply of micro switch anchor for ied , flexible wire 0 point 75mm cca coper core 2 , anchor bed side switch 5 amp , anchor pendent holder for bulbs , dc led bulb 12 v 20 w standard white , ms square pipe 1 inch x 1 inch x 2mm thick , ms square pipe 2 inch x 2 inch x 3mm thick , weigh taj ss 304 12 mm wier rope u bolt clamps for swr , jute coir running mat 66ft x 4ft made of natural , red running solid carpet size 70ft x 4ft 3mm thick , 20 awg multi strand teflon wire roll 100 mtr polycab , bty 1point 5 v rechargeable aa 2500 mah duracell for camera , duracell heavy duty 1035 medium r14 c 1point 5 volt for mega phone , bty aaa size 105v alkaline duracell for remote , duracell ultra alkiline aa bty for gps , bty duracell 1point5 v no 6 dry heavy duty 1050 r20 , key care long lasting cr 2032 lithium coin bty 3v , wipro safari emergency led latern with 7200 mah bty 15 watts , anchor extension board of 10 socket and 10 switches 6 amp , anchor extension cord 15 amp 2 socket and 2 switch , anchor 15amp of 2 switch with 15mtr wire 2point 5mm 3 core polycab , anchor 5 amp of 2switch with 15mtr wire 1point 5 mm 3 core polycab , incandescent abs traffic safety baton light size 3 ft rechargeable , drill machine bosch gsb 500 re impact with bit iron set , cotton rope 8mm 120mtr natural of white , light drive monkey heavy duty , caltex mild steel plumbob 150gms , transparent plastic water lavel pipe 30 mtr 10mm , rexine cloth 300gsm thickness 2mm maroon colour 10mtr x 1mtr , binding wire , broom hard , broom soft , room freshner , dettol handwash , fevicol , plastic mug , brick , crush sand , cement bag bag of 50 kg , aggregate 10mm , bleaching powder ) /bid number : gem/2025/b/6856177 * /dated: 04-11-2025 & & / bid document 1 / 30

State Government

CTN :43186983

02 Jan, 2026 NA

Haridwar - Uttarakhand

Tender For tender for supply of auto electrician and electronics trade equipments c c - equipments, allen key set of 12 pieces, back probe tools, caliper inside, calipers outside, center punch, dividers, electrician screw driver, hammer ball peen, hands file, logic probe, pliers combination, screw driver, screw driver, scriber, spanner d.e. set of 12 pieces, spanner, ring set of 12 metric sizes, spanners socket with speed handle, t-bar, ratchet and, steel rule 30 cm inch and metric, steel tool box with lock and key (folding type), test light, wire cutter and stripper, ac alternator slip ring puller, adjustable spanner, air blow gun with standard accessories, air impact wrench with standard accessories, air ratchet with standard, allen key set of 12 pieces, ammeter, angle plate adjustable, angle plate size, clamps c, clamps c, cleaning tray, copper bit soldering iron, dc ohmmeter, depth micrometer, dial gauge type 1 gr. a, (complete with clamping devices and stand), distributor-duel advance type, reluctance type, dividers, drift punch copper, drill point angle gauge, drill twist, electric soldering iron 230 v 25 watts, electric testing screw driver, electrical horns (different types), engineer's square, executive auto electrical tool kit, feeler gauge 20 blades (metric), file flat, file, half round, file, square, file, square, file, triangular, files assorted sizes and types including safe edge file (20 nos)

CTN :43148314

22 Dec, 2025 1.45 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of screw driver set , spanner set , multifunctional digital power meter , automotive digital led portable test light , ammeter voltmeter indicator , multifunctional dual led acdc light tester pen , invertor arc 300l welding machine , bosch gco 220 professional electric chop saw , bosch gsb 600 corded electric impact drill , esb dura heavy duty leather welding gloves , harrison lifting belt polyester 10 ton 10 meter , gum boot thigh height , hand gloves insulated , 48v dc power supply , multipurpose mini screw driver set , solder fume extractor , adjustable soldering iron , cp plus dvr , bnc pair , blower , esd mat 6x3 ft , tcm tool carrying bag , plywood 30 x 22 , working table , carpet plastic for floor , revolving chair , water proof gloves , needle file set

Central Government/Public Sector

CTN :43125448

31 Dec, 2025 3.10 Lacs

Jalandhar - Punjab

Tender For tender for supply of armourer tools and items c c - end mill cutter 06 mm , end mill cutter 08 mm , end mill cutter 04 mm , end mill cutter 03 mm , side end face cutter 3x75x25.4 mm , slitting saw cutter 1.9x75x25.4 mm , 45 degree both side angular cutter 16x80x25.4 mm , drill bit 3.5 mm , drill bit 8.5 mm , drill bit 1.9 mm , drill bit 3.3 mm , drill bit 6.8 mm , drill bit 2.8 mm , drill bit 4.8 mm , wire cutter 8 inch , tin cutter 14 inch , die 10x1.5 pitch , die 5.7x.45 mm , die 3.95x3 ba , die 4x.7 p , die 3x.5 p , die 4x.5 p , die 5/16 x 32 tpi , tap 7/32x28 tpi , tap 8.24x1.4 p , file flate bastard 6 inch , file flate smooth 6 inch , file flate bastard 4 inch , file flate smooth 4 inch , hacksaw frame 12 inch , cutting plair 8 inch , drill bit 6mm , drill bit 7.2 mm , drill bit 5.2 mm , drill bit 3.8 mm , drill bit 5.1mm , drill bit 2.5 mm , drill bit 12.1 mm , drill bit 4.6 mm , drill bit 9.3mm , file square 4 inch bastard , file half round smooth 6 inch , file half round bastard 6 inch , file flate smooth 8 inch , file flate bastard 8 inch , hand drill bosh gse 600 impact drill 100 pic assy , tool bit 0.5 inch x4 inch , tool bit 5/16x6 inch , gas lighter , welding rod no 10 (esab) , cotton waste , machine cleaning brush 2 inch , hack saw blade 24 tpi , paint white asian 01 ltrs each , painting brush 1 inch , painting brush 2 inch , power hacksaw blade 400x32x1.6mm , illuminator 12 watt , hand grinding wheel 4 inch , rechargeable cell 1.5aa 2/ mh , vernier caliper battery big , paint white asian 100 gms , paint red asian 100 gms , duco thinner 20 ltrs , thinner) (01 ltr pack) , quick fix 50 ml , rechargeable cell 1200 mh 3.7 vol lithium , plastic container 250 ml , plastic container 500 ml , measuring tape 5 mtrs , tape handle ratchet 1 to 6 mm , emery cloth 220 number , emery cloth 120 number , cast iron welding rod 10 no size , araldite 100 gms , camric cloth white , hss tool bit 3/8x4 inch , pantagraph tool bit hss , 4mm x 4 inch , lock tight 222 no 495 20 gm pack , digital vernier caliper 150 mm , bench vice 5 inch , copper coated ms rod 1/16 , cutting blade 4 inch , brass brazing rod 1/8 inch

CTN :43129122

31 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of refrigerant gas leak detector,refrigerant gas retrieving machine,cordless hammer drill machine,heavy duty small angle grinder,mid range impact wrench,high range impact wrench,gland packing extractor,gasket hollow punch cutter

CTN :43116244

24 Dec, 2025 NA

Jamnagar - Gujarat

Tender For supply of procurement of new tools and plants br items for fy 2025 26 under ge i navy jamnagar d d - aluminium ladder , circular saw , impact hammer drill machine , hammer drill machine , angle grinder , tools bag , electric planner , digital analogue measuring , leaser distance meter , hacksaw frame , cutting plier , sledge stone breaker hammer , cold chisel octagonal , water pump plier , screw drivers , box wrench , magnetic spirit level with aluminium body , measuring tape , concrete drill bit

CTN :43125797

26 Dec, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of battery tester,impact screwdriver,battery hydrometer,tool bag storage bag,flat file set,blow lamp,haxa frame taparia,9pc folding hex key set,screw driver small,screw driver large,nose plier,engraving machine,hammer 500gm,hammer 250gm,anvil 25kg,tool bag open mouth 12 inch,bench gsb 120li,bosch gsb 6500,screwdriver 100mm,stanley drill machine kit,bosch gsb 120li,bosch gsb 6500,screw driver 100mm,bosch drill bit set bs80,combination spnr set stanly,inch tape phita,combination plier n70-482,stitching machine

CTN :43070816

20 Dec, 2025 NA

Kamrup - Assam

Tender For supply of office stationaries c c - a4 paper , air freshener spray , air freshener , big towelcar , big towel , black phynyl , blue pen , cups and saucer , broom , cello tape , cfl bulbe , toilet brush , cleaner , correction pen , coaster , dinner set , dishwashing liquid , door mat , drum cartridge , whiteboard duster , envelopmedium , envelop-small , extension board , self adhesive flag , wiper , glue stick , lock and key , glue bottle , towelwhite , hand wash , highlighter , measuring tap , keyboard and mouse combo , mouse pad , microfiber cloth , mosquito liquid with mechine , naphthalene balls , plastic folder , plastic threads , pen v-5 , sccissor-medium , scissor-small , serving plate , staple remover , stapler machine-big , stapler machine-small , stapler pin-big , stapler pin-small , tissue paper , toner cartridge , vakalatnama , water glass , jug , water tap , white board , white board marker , white phynyl , serving trays , assamese gamusa - cotton , assamese gamusa - silk , office seal , name plate , fan capacitor , door lock and key , mortise lock , impact drill machine

Central Government/Public Sector

CTN :43017962

23 Dec, 2025 NA

Ranga Reddy-T - Telangana

Tender For supply of schedule1 , schedule2 , schedule3 , schedule4 , schedule5 , schedule6 , schedule7 , schedule8 , schedule9 , schedule10 , schedule11 , schedule12 , schedule13 , schedule14 , schedule15 , schedule16 , schedule17 , schedule18 , schedule19 , schedule20 , schedule21 , schedule22 , schedule23 , schedule24 , schedule25 , schedule26 , schedule27 portable hand angle grinder equivalent to bosch make "gws14-125s" with suitable cut off wheels size 4 intch (5 no's) make: bosch/stanley/dewalt/makita /milwaukee/snap on, cordless impact drill driver equivalent to bosch makegsb 10. 8-2li make: bosch/stanley/dewalt/makita /milwaukee/snap on, advanced hyderaulic puller set equivalent to skf make tmhc 110e make:skf/otc/ bosch/stanley /gedore/stahlwille/snap on/kennedy, advanced hyderaulic puller set equivalent to skf make tmbs 50e make:skf/otc/ bosch/stanley /gedore/stahlwille/snap on/kennedy, torque wrench 1/2" ratchet type ,torque range : 20 - 100 nm with hexagonal bit sockets 1/2" square drive 8mm(10 no's) make:bosch/stanley /gedore/stahlwille/ taparia/ torue master / hazet /atorn/jetech/snap on, adjustable pipe wrench 250 mm, max pipe can holde 33 mm make:bosch/stanley /gedore/stahlwille/ taparia/ bacho/snap on, tap holder for m3-m5 (4 no's) and m5-m12 (4 no's) make:bosch/stanley /gedore/stahlwille/ taparia/ bacho/snap on, hand tap sets of sizes m2,m2. 5,m3,m4,m5 each 10 no;s m6,m8,m10,m12,m16 each 5 no's for tapping steel make: addision / tottem / dormer/ yg/iscar/snap on /cle-line/greenfield threading, hand tap set of sizes 6/32 unc, 8/32 unc, 9/64 unc each 10 no's make: addision / tottem / dormer/ yg/iscar /snap on, bolt extractor set (min 5 no's) for removal of m3 to m18 bolts of qty:5 no's ) /bid number: gem/2025/b/6955743 * /dated: 02-12-2025 & & / bid document1 / 24

Drill Panel Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector