Latest drilling hole Tenders | Government drilling hole Tenders

Central Government/Public Sector

CTN :45732135

03 Jul, 2026 NA

Chittaranjan - West Bengal

Tender For supply of cloth ctton blue drill, width 71 to 73 cms, variety -4, is: 177/1989. specn: is 177 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45736741

27 Jul, 2026 NA

Chittaranjan - West Bengal

Tender For supply of cloth ctton blue drill, width 71 to 73 cms, variety -4, is: 177/1989. specn: is 177 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45730369

09 Jul, 2026 NA

Kannur - Kerala

Tender For providing and fixing following rating and breaking capacity mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel. making connections. etc. as required. 250 amp, 50 ka

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45731739

10 Jul, 2026 NA

Patiala - Punjab

Tender For supply of kit of u type drill body parallel shank, through coolent, size: dia 31.00 mm, shank dia 32.00 mm, flute length 105-110 mm, oal 160-165 mm with compitable inserts. (insert should be samefor centre and periphery) pvd coating or equivalent to widia code- 69339927. suitable for machining of steel material. one kit consists (1) drill body-02 nos (2) insert-20 nos (3) insert screw-20 nos make brand: kennametal, sandvik, taegutec, iscar equivalent to widia code-69339927. [ warrantyperiod: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45743720

09 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bolster bottom gusset. drawing no : wd - 90030 - s - 55, alt. 6, item no. 6. [ warranty period: 30 months after the date of delivery ] note: supplier should drill 4 holes for 22mm dia rivets onbolster bottom gusset (location of holes as mentioned in drawing) and supply accordingly. [ warranty period: 30 months after the date of delivery ] ]

CTN :45737007

31 Jul, 2026 NA

Kanchrapara - West Bengal

Tender For supply of hex. head screw m16x25 with 2.5mm drill hole across the head. assembly drg. no. icf drg. no.emu/m-0-1-033,alpha alt.-f/0 (small f by zero)(alpha alteration ' numerical alteration '0), item-18, part drawing no. icf drg. no. emu/m-0-1-039, alt-nil [ warranty period: 30 months after the date of delivery ] ]

CTN :45679372

02 Jul, 2026 20.16 Lacs

Delhi - Delhi

Tender For supply and replacement of defective parts of kirloskar make transformers of 1000/750/500 kva capacity at ugc & cag building, new delhi. - supply and fixing of over current earth fourth relay 24 dc l&t make etc complete as reqd. , supply and fixing of 11 kv indoor single phase resin cast current transformer 300/5amp etc complete as reqd., , supply and fixing of transformer 500 kva 11/0.433 kv wt1 scanner & rtd sencer lead., , supply & installation of suitable rating of 500 kva 11/0.433 kv lv bussing porcelain or epoxy-cast resin comply with is-1180 complete as required, , supply and fixing of suitable rating of 500 kva 11/0.433 kv lv flexible porcelain or epoxy-cast resin comply with is-1180 complete as required., , dismantling /loading and unloading of 500kva, 11kv/433volt, 3phase, 50hz, cast resin dry type kirloskar make indoor transformer hv/lv coil/core etc and repair of crack in hv/lv winding/core and putting cast resin/resin hardener, reassembling all the dismantle parts accessories confirming to is 11171 and iec 60076 etc including all tests i.e voltage ratio, magnetic balancing, vector group, ir magnetizing current, winding resistance etc complete as reqd., , supply & installation of 630a vcb vacuum interrupter etc complete as reqd., , sh-2 (old cag bldg), , supply and replacement of 750- 1000 kva transformer oil gas kit etc complete as reqd., , checking in 750-1000 kva transformer all type of protection etc complete as reqd., , supply and replacement of lv bushing oil seal in 750-1000 transformer etc complete as reqd. no.ryb) (4, , supply and replacement of hv bushing oil seal in 750-1000 transformer etc complete as reqd. (3 no. r,y, b), , supply and replacement of off load tape changer in 750-1000 kva transformer etc complete as reqd., , replacement of transformer oil in oltc top-up of main tank etc complete as reqd., transformer oil filtration and dehydration of 750 kva & 1000 kva transformer using high-vacuum oil filtration plant, including removal of moisture, dissolved gases, sludge and impurities from transformer oil, circulation of oil through filtration machine, achieving required bdv value, testing before and after filtration, manpower, tools & tackles, consumables, complete as required at site., , complete servicing, overhauling, cleaning, contact checking, lubrication, insulation resistance testing, contact resistance testing, functional testing and commissioning of oil circuit breaker (ocb), complete as required at site., , supply & installation of male contact, , supply & installation of female contact, , supply & installation of over current earth fault relay, , supply & installation of 24 volt dc power pack unit etc complete as reqd., , supply and fixing of transformer wti relay etc complete as reqd.., , supply and replacement of transformer oti relay etc complete as reqd.., , providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, ics=100% icu and operational voltage 690v etc. as required., , (make: schneider electric-nsx /siemens / lk/ abb/hager)

State Government

CTN :45696572

01 Jul, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government/Public Sector

CTN :45682173

19 Aug, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of hss drill parallel shank super jobber drill size: 3.8 mm dia as per is: 5101-1991 m35 (hss with 5 percent cobalt & 63-66 hrc) make j.k.files & tools or miranda or addison or bosch or it dagger only. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Drilling Hole Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector