Latest drilling pipe Tenders | Government drilling pipe Tenders

Central Government/Public Sector

CTN :45304996

13 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of drilling machine bench type / pillar type as per is 2425

CTN :45292178

01 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of manual cleaning engineering equipments moping/degreasing thinner cleaning of dry cloth cleaning, sur , hr spray painting of fwd and aft das , fr spray painting of stabilizer, firemain pumps, aux pumps, auxiliary transfer pumps, hp ac hp air b , fr spray painting of fwd mid and aft acs, ref plant, avcat system filtration, hanging tanks, ru tank , fr spray painting of lathe, drilling, bench grinder machine sea chest strainers , hr spray painting of mes and gb , fr spray painting of after steering gear, ventilation cooler frame and coolers , fr spray painting of imcs consoles and battery power back, de/rg/da/ac/cpp control consoles

Central Government/Public Sector

CTN :45284864

01 Jun, 2026 89.0 Thousand

Nagpur - Maharashtra

Tender For supply of drilling machine bench type / pillar type as per is 2425 (q3)

Central Government/Public Sector

CTN :45262739

04 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of drilling machine bench type / pillar type as per is 2425 (q3)

Central Government/Public Sector

CTN :45241674

02 Jun, 2026 NA

Coimbatore - Tamil Nadu

Tender For supply, installation, testing and commissioning of bench drilling machine as per enclosed technical specification [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :44821786

15 May, 2026 NA

Raigad - Maharashtra

Tender For bid to ras supply of bench/pedestal grinder , bench/pedestal drilling machine

CTN :45181938

03 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For supply of drilling machine bench type / pillar type as per is 2425 (q3)

Central Government/Public Sector

CTN :43369763

07 May, 2026 NA

Bangalore - Karnataka

Tender For bid to ras corrigendum : supply of supply of tools and accessories for lathe drilling machine and tool room precision work d d - h7 - as per sl.no.32 of technical specifcation , hss machinereamer-8 h7- as per sl.no.33 of technical specifcation , hss machinereamer-10 h7 - as per sl.no.34 of technical specifcation , hss machine reamer-12 h7 - as per sl.no.35 of technical specifcation , hss machine reamer-15 h7 - as per sl.no.36 of technical specifcation , hack saw frame- as per sl.no.37 of technical specifcation , hack saw blade - as per sl.no.38 of technical specifcation , ball pin hammer - as per sl.no.39 of technical specifcation , rubber hammer - 2inch- as per sl.no.40 of technical specifcation , combination spanner set - as per sl.no.41 of technical specifcation , lathe dog-bent type -as per sl.no.42 of technical specifcation , lathe dog-bent type -as per sl.no.43 of technical specifcation , lathe dog-bent type - as per sl.no.44 of technical specifcation , lathe dog-bent type - as per sl.no.45 of technical specifcation , bench vice -200mm -as per sl.no.46 of technical specifcation , bench vice -200mm -as per sl.no.47 of technical specifcation , wheel dresser - as per sl.no.48 of technical specifcation , plain combined drill - as per sl.no.49 of technical specifcation , plain combined drill - as per sl.no.50 of technical specifcation , plain combined drill - as per sl.no.51 of technical specifcation , ratchet type wrenches - as per sl.no.52 of technical specifcation , letter punch - as per sl.no.53 of technical specifcation , number punch - as per sl.no.54 of technical specifcation , parting tool - as per sl.no.55 of technical specifcation , parting tool inserts - as per sl.no.55a of technical specifcation , clamp screw - as per sl.no.55b of technical specifcation , wrench - as per sl.no.55c of technical specifcation , parting tool - as per sl.no.56 of technical specifcation , parting tool inserts - as per sl.no.56a of technical specifcation , wrench torx - as per sl.no.56b of technical specifcation , clamp screw - as per sl.no.56c of technical specifcation , parting tool holder- - as per sl.no.57 of technical specifcation , parting blade - as per sl.no.57a of technical specifcation , parting inserts - as per sl.no.57b of technical specifcation , parting tool holder - as per sl.no.58 of technical specifcation , parting blade - as per sl.no.58a of technical specifcation , parting insert - as per sl.no.58b of technical specifcation , screws - as per sl.no.58c of technical specifcation , allen key _spares as per sl.no.58d of technical specifcation , boring bar - as per sl.no.59 of technical specifcation , insert screws - as per sl.no.59a of technical specifcation , boring bar - as per sl.no.60 of technical specifcation , insert screws -as per sl.no.60a of technical specifcation , boring bar - as per sl.no.61 of technical specifcation , inserts for the boring bars - as per sl.no.61a of technical specifcation , insert screw- as per sl.no.61b of technical specifcation , boring bar - as per sl.no.62 of technical specifcation , insert screw- as per sl.no.62a of technical specifcation , boring bar - as per sl.no.63 of technical specifcation , inserts for boring bars - as per sl.no.63a of technical specifcation , insert screw - as per sl.no.63b of technical specifcation , boring bar - as per sl.no.64 of technical specifcation , inserts for boring tool - as per sl.no.64a of technical specifcation , insert screw- as per sl.no.64b of technical specifcation , torx-wrench - as per sl.no.64c of technical specifcation , boring bar - as per sl.no.65 of technical specifcation , inserts for boring bar- as per sl.no.65a of technical specifcation , shim _spares - as per sl.no.65b of technical specifcation , shim pin _spares - as per sl.no.65c of technical specifcation , lever _spares - as per sl.no.65d of technical specifcation , clamp screws _spares - as per //bid details 2 / 124 sl.no.65e of technical specifcation , turning tool - as per sl.no.

CTN :45036193

05 May, 2026 NA

Delhi - Delhi

Tender For expression of interest document for supply and delivery of school requisites 2026 for secondary schools (design and technology) - supply and delivery of school requisites 2026 for secondary schools (design & technology) - angle grinder, band saw, bench drilling machine, bench grinder, circular saw, compressor, spraygun, drilling machine (portable), extension cable, hot wire cutter, jig saw (portable), metal lathe, planer / thicknesser, router (portable), sander -orbital, soldering iron, strip heater, welding machine, wood working lathe, abrafile frame, adjustable spanner, adjustable spanner, anvil, bench hook*, bench shear (guillotine), bradawl, carpenters mallet, centre punch, centre square, chisels- mortice, chisels- mortice, chisels -bevelled edge, chisels -bevelled edge, chisels -bevelled edge, chisels- firmer, chisels- firmer, chisels- firmer, cold chisels, combination drill, combination pliers, coping, saws, corner clamps, countersunk bit, dividers, engineers square, engineers vice, forstner bit, g cramps, g cramps, hacksaw, hammer: ballpein, hammer: ballpein, hammer: ballpein, hammer claw, hammer cross pein, hand drill, hand files including handles, hand files including handles, hand files including handles, hand saws, hand saws, inside calipers, jack plane, jenny calipers, junior hacksaw, machine vice, marking gauge, marking knife, measuring tape, metalwork bench, mitre box, mole grip, nail punch, needle files, oil can, oil stone, outside calipers, pincers, pipe wrench, rasps, ring spanner, riveting machine kit, router bits, sash cramps, saw set, screw driver, screw driver, scriber, sliding bevel, smoothing plane, spanner - open ended, spirit level, spoke shave, spoke shave, steel rule, taps and dies, tenon saws, tinmans snip, tinmans snip, try square, v-block and clamp, vernier calliper, wire brush, woodwork bench, woodworkers bench vice, blackboard compasses, blackboard protractor, blackboard rule, blackboard set squares, design tables, isometric-grid blackboard*, square-grid blackboard*, whiteboard compasses, abrafile blades, coping saw blades, emery cloth, emery cloth, emery cloth, goggles, hacksaw blades, junior hacksaw blades, masks - respiratory, masks - dust, paint brush*, paint brush*, paint brush*, welding apron, welding gloves, welding rods.

CTN :44345613

30 Apr, 2026 3.5 Thousand

Bengaluru - Karnataka

Tender For corrigendum : procurement of machinery and equipment - inside caliper (divider)150, machine .brushes., bench. brushes., file,brushes., hacksaw .frame fixed 300mm., needle .file set., knurling .tool straight & diamond cut., hss .centre drill dia 8 mm., hss .centre drill dia 3.0 mm., hss .counter sink bit 120 degree., hss die .m4 - m12 with die stock., hss drill bit .straight shank dia 3 to 12 mm (step of 0.5 mm) (set)., goose neck .clamp set., strap .clamp set., machine .vice 150 mm (drilling)., self centering drill chuck 12 .mm., bench .grinder., dia .indicator - 0.01mm with styallus (needle type)., radius .gauge from 7.5 -15mm., thread .pitch gauge metric & inches., surface .plate granite 600 x 600 x 80 mm with stand., number .punch 5 mm set., pillar drilling. machine., cnc .simulators., outside .caliper (divider) 150, hammer .cross peen 0.75 kg with handle, flat .chisel, hss hand .hacksaw blade 18 tpi, magnetic .v block, rotary .table, sleeves .mt 3, sleeves .mt 2, sleeves .mt 1, materail .handling equipment, feeler .gauge 0.05 to 1.0 mm, radius .gauge upto 7mm, vernier .bevel protractor, universal .magnetic dial stand, outside .micrometre 25-50 mm, outside .micrometre 0-25 mm, dial .vernier 150 (0.02 lc), digital .vernier 0 - 150 mm, vernier .caliper 0 - 200 mm, vernier .caliper 0 -150 mm, vernier .height gauge 300 mm, center .punch, scriberr, try .square 4 inch blade, divider .spring type -150 mm, cnc cylindrical grinding machine., tool presetter , hydraulic vice - l- 525 x w- 108 x 135mm , opend 175mm, lathe dog carrier - bent tail 2 , lathe dog carrier - straight tail 2 , inserts type shell end mill dia 63mm with inserts (30nos.) 3 box., solid carbide end mill four flute dia 12mm , solid carbide end mill four flute dia 10mm , solid carbide end mill four flute dia 8mm , solid carbide end mill four flute dia 6mm , solid carbide end mill four flute dia 5mm , solid carbide end mill four flute dia 4mm , ball peen hammer 250 gms & 500 gms, warding file smooth 6 , knife edge file smooth 6 , knife edge file smooth 8 , knife edge file second cut 6 , knife edge file second cut 8 , knife edge file second cut 10 , half round file smooth 6 , half round file smooth 10 , half round file second cut 6 , half round file second cut 10 , half round file second cut 12 , half round file bastard 12 , round file smooth 6 , round file smooth 10 , round file second cut 6 , round file second cut 8 , round file second cut 10 , round file second cut 12 , round file bastard 12 , triangular file smooth 6 , triangular file smooth 8 , triangular file second cut 6 , triangular file second cut 8 , triangular file second cut 10 , triangular file bastard 10 , square file smooth 6 , square file smooth 8 , square file second cut 6 , square file second cut 8 , square file second cut 10 , square file bastard 12 , hand file second cut file 10 , flat file rough 12 , flat file smooth 8 , flat file smooth 10 , flat file second cut 8 , flat file second cut 10 , flat file second cut 12 , flat file bastard 12 , convex milling cutter dia 63 x 6 radius x bore size dia 27 mm., concave milling cutter dia 63 x 6 radius x bore size dia 27 mm., t slot cutter with parallel shank dia 17.5x8mm width shank dia 8mm, hss parallel shank end mill dia 16 four flute, hss parallel shank end mill dia 12, hss parallel shank end mill dia 10, hss parallel shank end mill dia 8, hss parallel shank end mill dia 6, hss tool bit 1 x 1 x 6 - 8% cobolt, hss tool bit 3/4 x 3/4 x 6 - 8% cobolt, hss tool bit 1/2 x 1/2 x 6 - 8% cobolt, hss tool bit 1/4 x 1/4 x 6 - 8% cobolt, flat slab oil stone 25 x 52 x 150 mm, hss centre drill dia 4.0 mm, hss machine reamer ( straight shank)dia 6 - 10 mm., hss hand reamer with wrench - dia 6 - 10 mm, power hacksaw machine with blade (10nos.)., hss tap set for size m4 - m12 with wrench (set) & core drills for the above tap set, taper shank hss drill dia 20mm, taper shank hss drill dia 16mm, taper shank hss drill dia 14mm, clamp c 10 , clamp c 5 , too

Drilling Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector