Latest drive pulley Tenders | Government drive pulley Tenders

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

Central Government And Public Sector

CTN :45227542

26 May, 2026 NA

Bengaluru - Karnataka

Tender For supply of drive pulley for c7 belt conveyor consisting of item no: 1 to 8 with quantity as indicated against each item to rwf drg no: 722065110050. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45211845

28 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of end cover assembly, pd-sp(3) -161 sht 6 , cable guide roller assembly, sp2-brc-019 , driven pulley for pillow block assembly , pin, p. no: 4, pd-sp(3) -242, tvv , cover, type-3, vsp-rmhp(m) -ifl011, brc , cover, type-4, vsp-rmhp(m) -ifl004, brc , ring, sp2-ssb-0285

Central Government/Public Sector

CTN :45203133

21 May, 2026 13.22 Lacs

Visakhapatnam - Andhra Pradesh

Tender For repair of bag house equipment in crmp- 1) cage repair( bending minor welding & painting), 2) cleaning and fixing of bags( opening the chamber, removing the venturies, taking out bags cleaning with and refixing) once in year, 3) cleaning of dust collecting hopper of bag house, 4) repair of dust hopper and its doors, 5) bag house screw conveyor body repair, 6) bag house screw conveyor hanger bearing with shaft changing, 7) bag house screw conveyor end bearing changing, 8) bag house screw conveyor coupling repairs, 9) bag house screw conveyor changing, 10) en masse conveyor drive sprocket changing, 11) en masse conveyor tail sprocket changing., 12) en masse conveyor drive chain fixing, 13) en masse conveyor links changing, 14) en masse conveyor drive unit coupling repair, 15) en masse conveyor drive chain rejointing in snap, 16) maintenance of rotary air locks (twice in a year), 17) bucket elevator belt rejointing in case of snap, 18) bucket elevator drive pulley changing, 19) bucket elevator boot pulley changing, 20) bucket elevator fallen buckets fixin, 21) pulse jet solenoid valves repair and maintenance, 22) drier maintenance in compressor house (4 driers), 23) maintenance of compressed air pipe line, 24) id fan casing removal and fixing back to faciltate for fan changing, 25) id fan casing cutting and fixing back during bearing changing, 26) id fan casing changing, 27) id fan casing repair work, 28) id fan suction duct patch work, 29) id fan delivery duct patch work, 30) to make arrangement for chimney cleaning on id fan delivery duct near chimney and duct opening and closing there.., 31) dust hopper gate replacement, 32) dust hopper vibrofeeder replacement, 33) dust hopper body repair patch work, 34) flexible hose to pulse jet replacement, 35) pulsing pipe changing, 36) pulsing pipe repair, 37) cyclone patch work, 38) flue gas duct leaks arresting patch works.

State Government

CTN :45204367

28 May, 2026 NA

Koradi - Maharashtra

Tender For procurement of turbo hub 800 mm shell diameter non-drive pulleys with shrink disk assembly for conveyor system in chp, 3x660 mw, ktps, koradi.

CTN :45205060

22 May, 2026 20.00 Lacs

Jodhpur - Rajasthan

Tender For supply of consumable and non consumable accessories and spare part of linen department -0 delay timer , drain valve for , a) washing machine , ball bearing for main drive , a) washing machine , b) drying tumbler , ball bearing of idler drive , a.)drying tumbler , main drive pulley , a) washing machine , b) drying tumbler , counter drive pulley , a) washing machine , b) drying tumbler , motor pulley , a) drying tumbler , gear box , vfd for hydro extractor plc , for hydro extractor , door handle lock , motor winding for washing machine , motor winding for drying machine , motor winding for hydro extractor , oil , gress , main valve with neeple , temperature lead , puli , emergency switch , building switch , laundry timer reverse to forward , door lock set , water drine valve , v-belt for main drive , a) washing machine , b) drying tumbler , v belt for idler drive , a) drying tumbler , toughened door glass for drying tumbler , rubber ring for door , door limit switch , push button with element indicator , light , microprocessor cyclictimer (plc) , contactor for drive motor contactor , for heater , contactor for hydro extractor , timer, 0-15 minutes , terminal block , heater element , a) washing machine , b) drying tumbler machine , c) spring for hydro extractor , d) transform , rectifier rubber , buffer , rubber coupling , miniature circuit breaker , off delay timer on

Central Government/Public Sector

CTN :45197674

28 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of conveyor pulleys - ply , drive , modi , vsp-rmhp(m)-l164 , non drive pulley , 1200-std-25 , non drive pulley , 1200-std-7 , non-drive pulley , 1000-std-6 , non drive pulley , 1000-std-10 , tail & takeup pulley , cb021 , r-2 , tail snub ply , conveyor , cc-25 , 26 , 27 , belt tension pulley , 1200mm , z063 , ndrv ply , sr no 7 , a1-prh3-01-m-0303r1 , ndrv ply , sn-10 , a1-prh3-01m0303r1 , deflector roller , 1000 bw conv , pulley , head , vsp-rmhp(m)-i089 , r2 , non drive pulley , 1000-std-2 , non drive pulley , 1000-std-12 , ndp asly , ndp-4 , 01789 , cob-5 conv

State Government

CTN :45172875

01 Jun, 2026 NA

Koradi - Maharashtra

Tender For procurement of drive & non-drive pulleys for essential conveyors installed at chp-210 mw, ktps, koradi

CTN :45099782

27 May, 2026 NA

Kodinar - Gujarat

Tender For supply of chain pulley block with travelling trolley

Central Government And Public Sector

CTN :45139715

19 May, 2026 NA

Bangalore - Karnataka

Tender For drive pulley for m3 belt conveyor as per rwf drawing no.711091610820. note: 1) mtc for item no 1 shall accompany the supply. 2) the pulley must be balanced statically anddynamically and valid certificate shall be produced along with the supply. [ warranty period: 12 months after the date of delivery ]

Drive Pulley Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors