Latest drive pulley Tenders | Government drive pulley Tenders

Central Government/Public Sector

CTN :45302384

28 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - scrap unserviceable mix ms and ci scrap, 25 kw axle pulley - 26 nos, 4.5 kw axle pulley - 12 nos, 1100 ah/2 volt ms battery module box - 22 nos, 120 ah/6 volt ms battery module box - 16 nos, return air filter for icf ac coaches - 25 nos, fresh air filter for icf ac coaches - 25 nos, panel filters for lhb power cars - 50 nos, custodian- sse (tl-ac) pbr, location - : sse (tl-ac) pbr sick line store room, as is where is basis, loading by purchaser, fdp 50 days. mode of delivery nos.

CTN :45142257

30 May, 2026 15.00 Lacs

Rewa - Madhya Pradesh

Tender For supply of jalpradya and pipe line material nagar prishad hanumana -isi gi pipes (surya/swastik/tata) – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi sockets – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi unions – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi tees – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi elbows – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi bends – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi nipples – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi reducer sockets – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi reducer elbows – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi reducer tees – 2 star rating: 50mm, 63mm 75mm, 90mm, 100mm flanges (2-hole pattern); 50mm, 63mm, 75mm, 90mm, 100mm pvc pipes (10 kg/cm² pressure rating); 3", 4", 6" c.i. bends; 3", 4", 6" c.i. reducer sockets; 3", 4", 6" c.i. reducer tees; 3", 4", 6" c.i. reducer bends; 3", 4", 6" c.i. air valves; 2", 3", 4", 6" c.i. non-return valves; gland packing cord, white lead (safeda), molten lead, jointing compound; heavy-duty plastic taps (1/2"); heavy-duty steel taps (1/2"); rubber rings (3", 4", 6", 8"); nuts & bolts (tvs company, all sizes); pvc tees (2", 2.5", 3", 4", 6"); pvc elbows (2", 2.5", 3", 4", 6"); pvc sockets (2", 2.5", 3", 4", 6"); pvc bends (2", 2.5", 3", 4", 6"); pvc reducer sockets (2", 2.5", 3", 4", 6"); pvc reducer tees (2", 2.5", 3", 4", 6"); pvc reducer bends (2"). 2.5, 3, 4, 6; clamps: 1-1/4, 1-1/2, 2, 2.5, 3, 4, 6; spindle rod (repair): 2, 2.5, 3, 4, 6; spindle rod with nut: 2, 2.5, 3, 4, 6, 8"; pipe wrench (taparia): 10, 12, 14, 18, 24; chain wrench (taparia): no. 36; spanner set (taparia): 4, 6, 8, 10, 12; t-wrench set (taparia); rubber packing; raw rubber; gate valve (isi brass): 1/2, 3/4, 1, 1.5, 2, 2.5, 3, 4; gate valve (c.i.): 1/2, 3/4, 1, 1.5, 2, 2.5, 3, 4; c.i. joint: 3, 4, 6, 8; c.i. sluice valve: 3, 4, 6, 8; c.i. tailpiece: 3, 4, 6, 8; c.i. bend (90 degrees): 3, 4, 6, 8; submersible pump (isi marked): 1 hp kirloskar/crompton (8-stage, 12-stage, 16-stage, 18-stage, 20-stage); 1.5 hp kirloskar/crompton (8-stage, 12-stage, 16-stage). stages: 18, 20 | 2 hp kirloskar/crompton | stages: 8, 12, 16, 18, 20 | 3 hp kirloskar/crompton (t6/t4) | stages: 12, 16, 18, 20 | 5 hp kirloskar/crompton (t6/t4) | stages: 8, 12, 16, 18, 20 | 6 hp kirloskar/crompton (t6/t4) | stages: 8, 12, 16, 18, 20 | 7.5 hp kirloskar/crompton (t6/t4) | stages: 8, 12, 16, 18, 20 | 10 hp kirloskar/crompton | stages: 8, 12, 16, 18, 20 | 15 hp kirloskar/crompton | stages: 8, 12, 16, 18, 20 | ltl panel board: 1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp bch starter ltl (1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); starter oil; sluice valve (2.5 inches, 3 inches, 4 inches, 6 inches, 8 inches, 10 inches); rubber packing; voltage meter (bch company: 1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); ammeter (bch company: 1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); c.i. d-joint (3", 4", 6", 8", 10"); heavy-duty chain pulley (5 ton); main switch ltl (3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); pvc. pipe wrap (tape) 1", 3/4"; elbows; couplers (sockets) for motor connection 1", 3/4"; vice (thin type) including nuts and bolts; rope 6mm, 8mm; saddle clamps for pipe connections: 315mm, 280mm, 250mm, 225mm, 200mm, 180mm, 160mm, 140mm, 125mm, 110mm; mdpe pipe 1/2"; ferrule 1/2"; nuts & bolts (size 13); tvs clamps 3", 4", 6", 8"; grinder machine; t-wrench 24x27; cutter machine; hammer drill machine; hammer; chisel; axe; hdpe pipe: 110mm, 125mm, 140mm, 160mm, 180mm, 200mm, 225mm, 250mm, 280mm, 315mm; hdpe tee: 110mm, 125mm, 140mm, 160mm, 180mm, 200mm, 225mm, 250mm, 280mm, 315mm; hdpe coupler (joint): 110mm, 125mm, 140mm, 160mm, 180mm, 200mm, 225mm, 250mm, 280mm, 315mm. reducers: 280/250 mm, 250/225 mm, 225/200 mm, 200/180 mm, 180/160 mm, 160/140 mm, 140/125 mm, 125/110 mm; bands: 110 mm, 125 mm, 140 mm, 160 mm, 180 mm, 200 mm, 225 mm, 250 mm, 280 mm, 315 mm;

CTN :45144252

26 May, 2026 10.00 Lacs

Shahdol - Madhya Pradesh

Tender For annual tender of supply of water supply materials - water supply material, g.i pipe 1 inch, g.i pipe 2.inch, g.i pipe 3 inch, g.i socket 1 inch, g.i socket 1.25 inch long, g.i socket 2.inch, g.i socket 2.inch long, g.i socket 3 inch, g.i elbow 1 inch, g.i elbow 1.25 inch, g.i elbow 2.inch, g.i elbow 3 inch, g.i tee 1 inch, g.i tee 1.25 inch, g.i tee 2.inch, g.i tee 3 inch, hdpe pipe 1 inch, hdpe pipe 1.25 inch, hdpe pipe 2 inch, hdpe pipe 3 inch, hdpe nipple 1 inch, hdpe nipple 1.25 inch, hdpe nipple 2 inch, hdpe nipple 3 inch, hdpe equle tee 1 inch, hdpe equle tee 1.25 inch, hdpe equle tee 2 inch, hdpe equle tee 3 inch, hdpe elbow 1 inch, hdpe elbow 1.25 inch, hdpe elbow 2 inch, hdpe elbow 3 inch, hdpe bend 1 inch, hdpe bend 1.25 inch, hdpe bend 2 inch, hdpe bend 3 inch, s.s. clamp with nut bolt, 2 inches, a.c. pipe 4 inches, washer no. 2 and 3, brass elbow 1/2 inch, brass elbow 1 inch, brass elbow 3/4 inch, raw rubber, cable 2.5 mm and 6 mm (national/kisan/texmo), connection cable 4 mm / armored - isi, connection cable 6 mm / armored - isi, pvc saddle clamp set for pipe connection 1 inch, pvc saddle clamp set for pipe connection 1.25 inch, pvc saddle clamp set for pipe connection 2 inch, pvc saddle clamp set for pipe connection 3 inch, ms saddle clamp set for pipe connection 1 inch, ms saddle clamp set for pipe connection 1.25 inch, ms saddle clamp set for pipe connection 2 inch, ms saddle clamp set for pipe connection 3 inch, hose clamp s.s. 1 inch, hose clamp s.s. 1.25 inch, hose clamp s.s. 2 inch, hose clamp s.s. 3 inch, pvc socket 1 inch, pvc socket 1/2 inch, pvc socket 3/4 inch, pvc valve 1 inch, pvc valve 1/2 inch, pvc valve 3/4 inch, pvc tee 1 inch, pvc tee 2 inches, pvc teflon tape, pvc gate valve 1 inch (kisan/texmo), pvc gate valve 1/2 inch (kisan/texmo), pvc gate valve 2 inches (kisan/texmo), pvc gate valve 3/4 inch (kisan/texmo), pvc elbow 1 inch (kisan/texmo), pvc elbow 1/2 inch (kisan/texmo), pvc elbow 2 inches (kisan/texmo), pvc elbow 3/4 inch (kisan/texmo), pvc casing pipe plain pipe 100 mm (kasta/kisan), pvc pipe 1 inch (kisan/texmo), pvc pipe 1/2 inch (kisan/texmo), pvc pipe 3/4 inch (kisan/texmo), pvc pipe 1.25 inch (kisan/texmo), pipe wrench 12 inches, pipe wrench 14 inches, pipe wrench 16 inches, pipe lifter 2.25 inches, pipe die 1.25 inch, panel board 15 hp three phase bentex (automatic), patti clamp 1 inch (isi), patti clamp 1.25 inch (isi), patti clamp 2 inches (isi), patti clamp 3 inches (isi), rubber ring 80 mm (isi) 3 inches, rubber ring 100 mm (isi) 4 inches, rubber ring 125 mm (isi) 5 inches, rubber ring 150 mm (isi) 6 inches, rubber seat packing, rod die, c.i. flange 2 inches, c.i. flange 3 inches, c.i. flange 4 inches, c.i. reducer tee 100x100 mm (isi), c.i. reducer tee 80x100 mm (isi), c.i. reducer tee 100x100x150 mm (isi), c.i. reducer tee 80x80x100 mm (isi), c.i. tee 100x100x100 mm (isi), c.i. tee 100x100x80 mm (isi), c.i. tee 150x150x150 mm (isi), c.i. tee 80x80x100 mm (isi), c.i. tee 80x80x80 mm (isi), c.i. tail piece 100 mm (isi), solvent, white cement, water tank 500 liters (syntex/kisan/texmo), water tank 1000 liters (syntex/kisan/texmo), vice handpump no. 4, chain pulley block 3 tons, nut and bolt, tail piece 2, 3, and 4 inches, gate valve 1 inch, gate valve 2 inches, gate valve 3 inches, gate valve 4 inches, gate valve brass 1 inch - isi, gate valve brass 1/2 inch - isi, gate valve brass 3/4 inch - isi, gate valve brass 2 inches - isi, gland rope, end cap pvc 1 inch, end cap pvc 1/2 inch, end cap pvc 3/4 inch, d joint ci 3 inches, d joint ci 4 inches, d joint ci 6 inches, hdpe d joint 2.5 inches, hdpe d joint 3 inches, hdpe d joint 4 inches, hand grinder machine 1600 watt bosch 5 inch, hand grinder blade 5 inch and 6 inch, hammer machine 1500 watt 26 mm bosch, breaker machine demolition 5 kg, fusing machine, sluice valve 50 mm, sluice valve 75 mm, sluice valve 90 mm, sluice valve 110 mm, tee 75 mm, tee 90 mm, reducer socket gi 1.25 inch-1.5 inch, reducer socket gi 2 inch -1.25 inch, r

State Government

CTN :45228145

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of ci cs casted items - c.i. casted items on new basis, c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sproc

Central Government And Public Sector

CTN :45227542

26 May, 2026 NA

Bengaluru - Karnataka

Tender For supply of drive pulley for c7 belt conveyor consisting of item no: 1 to 8 with quantity as indicated against each item to rwf drg no: 722065110050. [ warranty period: 30 months after the date of delivery ] ]

CTN :44964160

20 May, 2026 18.38 Lacs

Bhadradri Kothagudem - Telangana

Tender For corrigendum : roof bolts, m.s. bolts & nuts , rivets, washers & screws , , dog nails , , fish plates, nuts & bolts for fish plates , , belt jointing pins , , cable hooks and signal hooks , , belt conveyor rollers , , belt sections , , resin capsules , , cement capsules , , gi canisters , , blasting gallery - spacers , , radiator repairs , , repairs and rewinding of motors of ac & dc , , repairs / rewinding of transformers (welding/lighting/power) , , gl wire , , wire mesh for longwall salvage , , manufacturing of supply of electrical coils for , , i) ac motors up to 6.6kv grade , , li) transformer coils up to 33 kv grade , , repairs of rotors for electric motor , , lighting cable , , steel chock manufacturing , , house wiring , , all types of fan repairs , , shovel bucket welding , , repairs of pumps , , couplings manufacturing , , special steel and alloy castings , , (tooth points, track pads, mn steel casting) , , manufacturing of fly ash bricks (not to be manufactured at stores site. it shall be at their own site) , , manufacturing of pump components (spares) , , transformer oil filtration , , reconditioning of drill bits an drill rods. , , vulcanizing the old training cable sof drill machines, sdls, lhds etc (work should be carried out at the respective mine premises. , , manufacturing of earth clamps, g.i.flats, g.i.bolts and nuts. , , crimping of hydraulic hoses. , , repairs to hydraulic pumps, motors, control valves and other related components. , , refurbishing of lt & ht switches with oem spares including testing. , , manufacturing/repairs of slip rings & d-contacts. , , furniture repairs i.e. cane chairs, tables, almirahs etc. , , repairs to wet grinders, water purifiers and water coolers , , manufacturing of coupling bolts of all sizes , , fabrication of oht line components like cross arms, clamps, stay wires, cross brassings, base plates etc. , , manufacturing of haulage rope drum rollers. , , all sizes of ventilation doors. , , safety boards designing/stickering/painting with retro-reflective radium papers/paint on hemm/ radium stickering in underground & surface, radium boards, safety boards & radium jackets. , , fabrication of lighting & cable cross over towers , , maintenance & repairs of air conditioners on hemm , , painting work in underground and on surface , , fabrication and erection of ms structural works like gantry, bunker etc. , , tailoring works at hospitals & area workshops , , manufacturing of hume pipes , , clay pills manufacturing , , maintenance of pmts/lighting transformers/power transformers & sub-stations , , erection /renovation of residential/pmts/sb-station earth pits (conventional type /chemical type). , , testing of all protective relays & mprs , , tub assembling/repairing of coal tubs in mines. , , cl casting works like ci pulley, tub wheels , , outsourcing works in mines, like masonary walls construction, surface material loading, cleaning and dusting in underground etc. , , all types of computer software installation, antivirus, hardware and network installation. , , cc cameras installation and repairs.

Central Government/Public Sector

CTN :45211845

28 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of end cover assembly, pd-sp(3) -161 sht 6 , cable guide roller assembly, sp2-brc-019 , driven pulley for pillow block assembly , pin, p. no: 4, pd-sp(3) -242, tvv , cover, type-3, vsp-rmhp(m) -ifl011, brc , cover, type-4, vsp-rmhp(m) -ifl004, brc , ring, sp2-ssb-0285

Central Government/Public Sector

CTN :45203133

21 May, 2026 13.22 Lacs

Visakhapatnam - Andhra Pradesh

Tender For repair of bag house equipment in crmp- 1) cage repair( bending minor welding & painting), 2) cleaning and fixing of bags( opening the chamber, removing the venturies, taking out bags cleaning with and refixing) once in year, 3) cleaning of dust collecting hopper of bag house, 4) repair of dust hopper and its doors, 5) bag house screw conveyor body repair, 6) bag house screw conveyor hanger bearing with shaft changing, 7) bag house screw conveyor end bearing changing, 8) bag house screw conveyor coupling repairs, 9) bag house screw conveyor changing, 10) en masse conveyor drive sprocket changing, 11) en masse conveyor tail sprocket changing., 12) en masse conveyor drive chain fixing, 13) en masse conveyor links changing, 14) en masse conveyor drive unit coupling repair, 15) en masse conveyor drive chain rejointing in snap, 16) maintenance of rotary air locks (twice in a year), 17) bucket elevator belt rejointing in case of snap, 18) bucket elevator drive pulley changing, 19) bucket elevator boot pulley changing, 20) bucket elevator fallen buckets fixin, 21) pulse jet solenoid valves repair and maintenance, 22) drier maintenance in compressor house (4 driers), 23) maintenance of compressed air pipe line, 24) id fan casing removal and fixing back to faciltate for fan changing, 25) id fan casing cutting and fixing back during bearing changing, 26) id fan casing changing, 27) id fan casing repair work, 28) id fan suction duct patch work, 29) id fan delivery duct patch work, 30) to make arrangement for chimney cleaning on id fan delivery duct near chimney and duct opening and closing there.., 31) dust hopper gate replacement, 32) dust hopper vibrofeeder replacement, 33) dust hopper body repair patch work, 34) flexible hose to pulse jet replacement, 35) pulsing pipe changing, 36) pulsing pipe repair, 37) cyclone patch work, 38) flue gas duct leaks arresting patch works.

CTN :45205060

22 May, 2026 20.00 Lacs

Jodhpur - Rajasthan

Tender For supply of consumable and non consumable accessories and spare part of linen department -0 delay timer , drain valve for , a) washing machine , ball bearing for main drive , a) washing machine , b) drying tumbler , ball bearing of idler drive , a.)drying tumbler , main drive pulley , a) washing machine , b) drying tumbler , counter drive pulley , a) washing machine , b) drying tumbler , motor pulley , a) drying tumbler , gear box , vfd for hydro extractor plc , for hydro extractor , door handle lock , motor winding for washing machine , motor winding for drying machine , motor winding for hydro extractor , oil , gress , main valve with neeple , temperature lead , puli , emergency switch , building switch , laundry timer reverse to forward , door lock set , water drine valve , v-belt for main drive , a) washing machine , b) drying tumbler , v belt for idler drive , a) drying tumbler , toughened door glass for drying tumbler , rubber ring for door , door limit switch , push button with element indicator , light , microprocessor cyclictimer (plc) , contactor for drive motor contactor , for heater , contactor for hydro extractor , timer, 0-15 minutes , terminal block , heater element , a) washing machine , b) drying tumbler machine , c) spring for hydro extractor , d) transform , rectifier rubber , buffer , rubber coupling , miniature circuit breaker , off delay timer on

Central Government/Public Sector

CTN :45235184

26 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - pulley 98080106 %u2013 ci pulley scrap: scrap released consisting of ci pulleys such as main pulley, governor pulley, ci pulleys, axle pulleys including 4 groove axle pulley, 6 groove axle pulley, deep v groove pulleys including 4.5 kw type, alternator pulleys, drp/srp pulleys and other pulleys of various sizes and types, ci brake blocks, pulley cut pieces, with or without ms attachments, materials broken and damaged, with or without grease and oil, all materials unserviceable and beyond economical repair ber, not fit for railway use, sold on as is where is basis, loading by purchaser, custodian: dms/scrap/pardi.

Drive Pulley Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector