Latest e waste scrap Tenders | Government e waste scrap Tenders

Central Government/Public Sector

CTN :40754113

02 Jul, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : custom bid for services - non-core maintenance activities in m&s-1. the scope of work includes carrying out the following non-core activities of maintenance and services department at bhelpppu, thirumayam as per instructions of maintenance in-charge. as per bhel estimate, it requires indicative 2 no. of unskilled labours daily to complete all the below activities. 1. cleaning of machines, components, oil spilled area during and after maintenance. 2. movement of spares, components and consumables for maintenance. 3. maintenance assistance for heavy works. 4. handling of lubricants, hydraulic oil, gas cylinders and diesel. contractor's scope: aa) cleaning of machines, components and oil spilled areas during and after maintenance: 1. cleaning of sub-assemblies and dismantled components while attending the break-down of machines. 2. cleaning of machine bottom floor, facility bottom floor and hydraulic power pack surrounding area as and when required. 3. cleaning of the machine surface and other accessories & fixtures of the machines for trouble shooting and to access the machine components during maintenance. 4. cleaning of the machine, floor area after attending the breakdown. all the spillage oil, oil soaked cotton waste, refractory wastes and other scrap wastes generated during maintenance to be removed from the surroundings of the machine and moved to the waste bins. 5. cleaning of oil, chips and dust inside and outside machine pit and intricate areas of machines while attending maintenance. 6. cleaning of machine components, filters and stand-by sub-assemblies with suitable cleaning agents. 7. cleaning of machines under shifting and assisting the fitters & electricians for dismantling, shifting and re-erection activities. 8. cleaning of crane parts at the top of the cranes and at the floor level are to be done as per instruction of maintenance in-charge. bb) movement of spares, components and consumables for maintenance: 1. movement of machine components from machine area to work bench and vice versa. 2. movement of raw materials for spares manufacturing to the respective machine shop. 3. movement of spares, consumables, raw materials, gas cylinders, etc., from stores to respective maintenance sections/areas and vice versa. 4. movement of heavy duty cables and cable drums from storage area to work place and vice versa. 5. movement of waste / scrap material to the respective disposal area. 6. movement of crane parts and lifting tackles during maintenance and for testing. 7. movement of furnace castings, refractory bricks, castables, refractory cement, ceramic wool, etc. for furnace maintenance. cc) maintenance assistance for heavy works: 1. assistance in activities like cable laying, dragging, winding, etc. 2. loading & unloading of lpg cylinders, refractory materials, machine parts, etc. from transport vehicles. 3. assisting in loading & unloading of machines / machine parts during erection and shifting of machines as and when required. 4. assistance in various maintenance activities involving heavy works like tightening / loosening of heavy duty fasteners, removal & assembly of heavy bearings, etc. 5. handling of heavy parts of the machine during maintenance. dd) handling of lubricants, hydraulic oil, gas cylinders and diesel: 1. cleaning of lubrication and hydraulic system of machines fairly without any oil traces. 2. assisting fitters for changing the worn out/damaged parts such as hoses, valves, high pressure pipe fittings, filters, etc., while doing maintenance of the systems. 3. assisting in oil top up/replacement with proper grade of oil in the respective hydraulic / lube oil tanks and gear boxes in the machines / equipments. 4. assisting in greasing of machines, cranes and facility items at pppu. all greasing points in the plummer blocks, pillow blocks, guide ways, machines greasing points are to be filled with necessary grade of grease manually or using grease gun wherever possib

Corporations And Associations And Others

CTN :40865657

04 Jul, 2025 8.52 Lacs

Delhi - Delhi

Tender For supply of electrical material for day to day use in mvid hospital. - supply of 1.5 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 2.5 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 4 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 6 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 10 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, 16/0.20 mm (0.5 sqmm) twin circular, frls pvc sheathed, workshop flexible copper cable, supply of 3mm thick phenolic laminated sheet as required, supply of s.p. 5/6 a, one way switch, piano type isi marked, supply of 3 pin 5/6 a socket outlet, piano type isi marked each, supply of s.p. 15/16 a, one way switch, piano type isi marked, supply of 6 pin 15/16 & 5/6 a socket outlet, piano type isi marked, supply of s.p. 5/6 a, one way switch, modular type isi marked, supply of 3 pin 5/6 a socket outlet, modular type isi marked each, supply of s.p. 15/16 a, one way switch, modular type isi marked, supply of 6 pin 15/16 & 5/6 a socket outlet, modular type isi marked, supply of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current (bldc) motor, class of insulation:b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope,copper winding, power factor not less than 0.9, service value (cm/m/w) minimum 6.00, air delivery minimum 210 cum/min, 350 rpm (tolerance as per is : 374-2019), thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50hz, single phase ac supply, earthing etc. complete as required., supply of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following:(a) total system wattage 20 watt +/- 5%(b )luminous efficacy lumens/watt >=95 (c)power factor >=0.95, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, 25 amp modular spmcb, c curve, supply of 3 pole mccb, 125a, 16ka, supply of 3 pole mccb, 200a, 25ka, s/o aluminium lugs for 35 sq. mm cable, supply of following size heavy duty exhaust fan complete with arms, blades ring work on 220/240 volt ac supply etc as required.300 mm, 1400 rpm, s/o aluminium lugs for 25 sq. mm cable, s/o aluminium lugs for 16 sq. mm cable, s/o aluminium lugs for 95 sq. mm cable, s/o aluminium lugs for 120 sq. mm cable, s/o aluminium lugs for 185 sq. mm cable, s/o aluminium lugs for 240 sq. mm cable, s/o of mccb sheet metal enclosure, 4p, 100-125a

Corporations And Associations And Others

CTN :40865660

04 Jul, 2025 9.13 Lacs

Delhi - Delhi

Tender For supply of electrical materials for day to day maintainance of ei in balak ram hospital. - supply of 1.5 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 2.5 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 4 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 6 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 10 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, 16/0.20 mm (0.5 sqmm) twin circular, frls pvc sheathed, workshop flexible copper cable, supply of 3mm thick phenolic laminated sheet as required, supply of s.p. 5/6 a, one way switch, modular type isi marked, supply of 3 pin 5/6 a socket outlet, modular type isi marked each, supply of s.p. 15/16 a, one way switch, modular type isi marked, supply of 6 pin 15/16 & 5/6 a socket outlet, modular type isi marked, supply of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current (bldc) motor, class of insulation:b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope,copper winding, power factor not less than 0.9, service value (cm/m/w) minimum 6.00, air delivery minimum 210 cum/min, 350 rpm (tolerance as per is : 374-2019), thd less than 10%, remote or electronic regulator unit for speed control andall remaining accessories including safety pin, nut bolts, washers, temperature rise=75degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50hz, single phase ac supply, earthing etc. complete as required., supply of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following:(a) total system wattage 20 watt +/- 5%(b )luminous efficacy lumens/watt >=95 (c)power factor >=0.95, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, supply of 3 pole mccb, 125a, 16ka, supply of 4 pole mccb,400a, 50ka, s/o aluminium lugs for 35 sq. mm cable, supply of following size heavy duty exhaust fan complete with arms, blades ring work on 220/240 volt ac supply etc as required.300 mm, 1400 rpm, s/o 25 amp modular spmcb, c curve, s/o aluminium lugs for 25 sq. mm cable, s/o aluminium lugs for 16 sq. mm cable, s/o aluminium lugs for 95 sq. mm cable, s/o aluminium lugs for 120 sq. mm cable, s/o aluminium lugs for 185 sq. mm cable, s/o aluminium lugs for 240 sq. mm cable, s/o modular base & cover plate for 1 module, s/o modular base & cover plate for 2 module, s/o modular base & cover plate for 3 module, s/o modular base & cover plate for 4 module, s/o modular base & cover plate for 6 module, s/o modular base & cover plate for 8 module, s/o modular base & cover plate for 12 module, s/o modular bell push, isi marked, s/o stepped type modular fan regulator (2 module), s/o call bell/ buzzer, single phase

corporations/Associations/Others

CTN :40823433

01 Jul, 2025 NA

Dehradun - Uttarakhand

Tender For auction sale of old, used, waste, scrap electrical & electronics items, as per lot annexure.,old, used, waste, & scrap 10 inch raising & table law bench with 1 h.p. motor