Latest earth excavation Tenders | Government earth excavation Tenders

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

CTN :45724340

06 Jul, 2026 7.75 Lacs

Multi City - Telangana

Tender For procurement of leakage materials arresting of leakages and in division no.44, 45, 46,47,62,63 and 64 under annual maintenance for the year 2026-27 - 150 mm dia , 150 mm dia 15 mm thick , 160 mm dia , 200 mm dia , 200 mm dia 15 mm thick , 200 mm dia hdpe , 315 mm dia hdpe , 350 mm dia m.s , arresting of leakages at various locations in ward no. 44,45,46,47 &48 including earthwork excavation and arresting of leakages with required materials and red rock cement, portland cement, caulking, necessary apparatus leakage arresting and refilling of the excavated earth includind cost and conveyance of all tools materials and labour charges etc., complete. (a) 160 mm dia hdpe , cost of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (a) 100 mm dia 15 mm thick , manufacture, supply and delivery of di d/f gate valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade ggg-40/ sg- 400/15 or ggg-50/sg-500/7 or equivalent grade as per i.s.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with epdm food grade quality and seals of nbr and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per bs5163-89/is14846-2000/din 3202 f 4. all the valves should be with electrostatic powder coating both inside and outside pocket less body passage. drilled as per requirement of the dept. (a) 100 mm dia , manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes. pipe end long neck (a) 110 mm dia , manufacture, supply,& delivery of high density polyethylene pipes (pe-100 grade) for water supply conforming to is 4984-2016 including transportation to any where in t.g, but excluding gst and specials etc.,complete(supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 metres.) 8 kg (a) 110 mm dia hdpe , supply and delivery of 53 grade opc cement bags including all charges etc., complete as per the directions of the departmet officer in charge. , supply and delivery of frc cement supply 5 kg bag including all charges etc., as per the directions of the departmet officer in charge complete. , supply and delivery of nuts and bolts including all charges etc., complete.as directed by the deparment officer in charge. , supply and delivery of packing rope including all charges as per the directions of the departmet officer in charge. , supply and delivery of rubber sheet including all charges etc., as per the directions of the departmet officer in charge complete. , supply, fabrication and fixing in position of ms for windows and grills including cost and conveyance of all material and all labour chages for fabricating, fixing including cost of welding rods, power charges, xcluding cost of fixing in positio etc complete.

State Government

CTN :45520196

03 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : erection of 01 nos 33kv rewan bay with supply of material, integration and remote gateway work at 220kv ss bangra under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45520197

03 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : erection of 01 nos 33 kv birdha bay with supply of material, integration and remote gateway work at 220kv ss birdha under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

Central Government/Public Sector

CTN :45369103

04 Jul, 2026 20.00 Lacs

Ramgarh - Jharkhand

Tender For corrigendum : repair maint of gi water supply pipe line sluice valve nrv valve pit chamber at src mh mdc sho and golf area under ge ramgarh cantt

Central Government/Public Sector

CTN :45369104

04 Jul, 2026 20.00 Lacs

Ramgarh - Jharkhand

Tender For corrigendum : repair maint of gi water supply pipe line sluice valve nrv valve pit chamber at prc mes asc temple lane and lekha nagar under ge ramgarh cantt

Central Government/Public Sector

CTN :45700281

17 Jul, 2026 30.00 Lacs

Danapur - Bihar

Tender For repair maint of cidi pipe line various valves valve pit chamber and allied works at danapur under ge danapur cantt

Central Government/Public Sector

CTN :45713861

18 Jul, 2026 49.50 Lacs

Bareilly - Uttar Pradesh

Tender For repair/replacement to sewage line, septic tank, soak pit, hardstanding and path under age b/r - i of ge (west) bareilly.

CTN :45719867

08 Jul, 2026 9.83 Lacs

Murshidabad - West Bengal

Tender For rate contact for cleaning, cutting of grass, dewatering, earth excavation , pest control etc at different areas under ahp em of stage i and ii, sgtpp, wbpdcl as and when required basis for 02 yrs.

CTN :45699269

10 Jul, 2026 6.01 Lacs

Villupuram - Tamil Nadu

Tender For repair of community compost pit in karadipakkam panchayat repair of segregation shed in karadipakkam panchayat, providing pumping main line 415m from colony pump room to community hall and perumal koil in karadipakkam panchayat , providing pumping main line 560m from colony pump room to community hall in karadipakkam panchayat

Earth Excavation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector