Latest edc machine Tenders | Government edc machine Tenders

Central Government/Public Sector

CTN :45531591

16 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot non ferrous scrap - scrap released cut pieces of copper contact wire. all sort and size. copper 99 percent. carbon, iron and dust 01 percent. [qty on approx basis] note- delivery will be given from 1000 kgs. electronic weighing machine in new non-ferrous godown. note- actual composition of various metals in the lot may vary from the percentage described above, therefore purchase may satisfy themself in all respect about quality of lot before bidding. purchasers are also advised to read and understand the para 3 of terms & conditions governing sale of scrap material through e-auction attached under depot document. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

Central Government/Public Sector

CTN :45531592

16 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot non ferrous scrap - scrap released cut piece of copper catenary wire , jumper wire, dropper wire, l.s. wire, runner wire, copper rods, catenary clips, and other ohe copper item. copper 99 percent, carbon, iron and dust 01 percent. [qty on approx basis] note- delivery will be given on 1000 kgs. electronic weighing machine of non-ferrous godown. note- actual composition of various metals in the lot may vary from the percentage described above, therefore purchase may satisfy themself in all respect about quality of lot before bidding. purchasers are also advised to read and understand the para 3 of terms & conditions governing sale of scrap material through e-auction attached under depot document. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

Central Government/Public Sector

CTN :45531593

16 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot non ferrous scrap - scrap released cut pieces of copper contact wire. all sort and size. copper 99 percent. carbon, iron and dust 01 percent. [qty on approx basis] note- delivery will be given from 1000 kgs. electronic weighing machine in new non-ferrous godown. note- actual composition of various metals in the lot may vary from the percentage described above, therefore purchase may satisfy themself in all respect about quality of lot before bidding. purchasers are also advised to read and understand the para 3 of terms & conditions governing sale of scrap material through e-auction attached under depot document. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

Central Government/Public Sector

CTN :45531594

16 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot non ferrous scrap - scrap released cut pieces of copper contact wire. all sort and size. copper 99 percent. carbon, iron and dust 01 percent. [qty on approx basis] note- delivery will be given from 1000 kgs. electronic weighing machine in new non-ferrous godown. note- actual composition of various metals in the lot may vary from the percentage described above, therefore purchase may satisfy themself in all respect about quality of lot before bidding. purchasers are also advised to read and understand the para 3 of terms & conditions governing sale of scrap material through e-auction attached under depot document. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

Central Government/Public Sector

CTN :45531595

16 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot non ferrous scrap - scrap released cut pieces of copper contact wire. all sort and size. copper 99 percent. carbon, iron and dust 01 percent. [qty on approx basis] note- delivery will be given from 1000 kgs. electronic weighing machine in new non-ferrous godown. note- actual composition of various metals in the lot may vary from the percentage described above, therefore purchase may satisfy themself in all respect about quality of lot before bidding. purchasers are also advised to read and understand the para 3 of terms & conditions governing sale of scrap material through e-auction attached under depot document. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

CTN :45527654

03 Jul, 2026 NA

Hyderabad - Telangana

Tender For supply of solid carbide reamer dia 2mm shank dia 4 mm min and length 65 mm , solid carbide reamer 45hrc dia 6point5 x fl 28 x oal 101mm , solid carbide reamer 45hrc dia 1point 4 x fl 8 x oal 40 , centre drill type a maximum length in mm 37point 50 pilot dia in mm 1point 6s hank dia in mm4 , centre drill 3point 15x1point 25 length 33point 5mm , two piece construction twist drills parallel shank dia 4point 2mm , 5 steel with case material plastic measuring length m 5tape width mm 19 , 50 linen with case material plastic measuring length 50 m width 12 mm , bore air hose nominal bore size 10mm x length of the pipe 50 meters , bore air hose nominal bore size mm 6point 30 length of the pipe meter 5 , ruled register 200 pages , white pencil eraser , polymers air bubble film width of film in a roll 1000 mm , bosch corded portable drill machine having drilling capacity in steel 13mm 25mm motor power 701 w , pressure sensitive adhesive tapes br 108mmx100 mtr x width 60mm , solar led torch light , transparent polypropylene tape length 50 meter x width 24mm , transparent cellulose tape length 25meter width 12mm , transparent polypropylene tape length 50 meter width 60mm , led diving torch light capacity 10000 mah , camlin cd marker black , camlin bold e permanent marker red , reynolds 4point 0 mm black colour permanent markers , camlin permanent marker blue , cotton yarn waste , surgical face mask , black lead hb drawing pencil , nitrile coated hand glove size 7 to 8 inches m , miranda tool saw blades nominal length of blades mm 300width of blades mm 12point 5 , antimicrobial hand wash 500 ml , high speed steel wood cutting circular saw 650watt with 6variable speed power input in watt 1050 , tape69 vinyl ht tape size 20point 1 meter in roll , lifebuoy liquid toilet soap of 5 liter pack , lr grade acetyle acetone size 24 liter , solid carbide drill dia 8point 8 mm length 100mm , solid carbide drill dia 3 mm length 165mm , carbide drill 4 mm length 75mm , carbide drill 6point 00mm length 93mm , miranda solid carbide drill 6point 5mm length 101mm , miranda solid carbide drill 7mm length 111 mm , carbide drill - 8mm length 117mm , solid carbide drill 11mm length 140mm , nylon 3-strand hawser-laid rope , crepe paper masking tape 18mm , paper masking tape 72mm , black lead b general writing pencil , plastic glue gun 40 watt , polyester round slings 10x6 mtr load capacity 10 tonne , rubber bands 32 mm x 1point 5 mm lxw , high vacuum pump motor power 1 hp rpm 1440 pumping speed 7 cm3 hr , tungsten carbide wood cutting circular saw power input 1200 watt rpm 5500 , ldpe zip lock covers size 3 x 6 , ldpe zip transparent pouch size 5 x 7 , ldpe zip plain pouch size 6 x 8 , ldpe zip pouch size 9 x 12 , electronic platform type weighing scale load capacity 1000kg , bosch pipe cutter with ratchet cutting action , cello hdpe bucket of capacity 25 liters , natural pp round cylinder domestic bathroom mug multi upto 500 ml , plastic stretch wrap film grade 210 , radial drilling machine three phase supply 415 v 50 hz lxwxh 350x850x1825 , bracket mounted fan for wall mounting 400 mm , crane weighing scale of rated load capacity - 100 , plastic measuring mug cup capacity 500 ml , wooden letter writing brush , hdpe bucket of capacity 10 liters , pallet truck 3000 kilogram kg //bid details 2 / 44

State Government

CTN :45397974

18 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

CTN :45486249

22 Jun, 2026 40.75 Lacs

Kurukshetra - Haryana

Tender For purchase of lab equipment item for material testing laboratory as per nabl norms. - electronic balance 200 gm, accuracy 0.001 gm, standard weight box (stainless steel) 1 mg to 200 gm, variable flow type air permeability apparatus (blaine type)variable flow type air permeability apparatus (blaine type), whatman filter paper 40 (pkt. of 100 pcs), digital thermo hygrometer, mercury, stop watch digital 1/10 sec, electronic balance 1 kg capacity, graduated cylinder, length comparator, shrinkage bar mould (single), humidity chamber (heating), cement autoclave, le-chatelier water bath, steel scale 300 mm, le-chatelier mould, vicat apparatus with dashpot, vicat mould, electronic balance 6 kg 0.5gm readability., poking rod for cement, cube mould (70.6 mm), standard sand grade-i (25 kg bag), standard sand grade-ii (25 kg bag), standard sand grade-iii (25 kg bag), vibrating machine, automatic compression testing machine 500 kn, accelerated curing tank , gauging trowel, electronic balance 15 kg, cube mould (150 mm), automatic compression testing machine 2000 kn, vernier caliper digital 300 mm, measuring scale 300 mm, hot air oven 450 x 450x 450mm., water bath (28 ltr), electronic balance 10 kg capacity 1gm readability., concrete test hammer 10-100 proceq, anvil for concrete test hammer., ultrasonic pulse velocity apparatus, half cell potentiometer (rebar corrosion detector)

CTN :45476070

15 Jun, 2026 2.37 Crore

Saharanpur - Uttar Pradesh

Tender For audyanik proyog avam prashikshan kendra saharanpur mein nirmaanadhin shahad utkrishthta kendra se sambandhit machinery or parts ki apoorti or establishment ka karya - supply & installation of automatic honey bottling filling machine with sensor based calibrator including with filling range (50 grams to 1000 grams), outout/min (any size within range 3000 to 5000 bpd), filling system (pneumatic vmp system synchronize with servo motor), direction of movement (left to right), number of head/syringe (single), drop controller (y- pneumatic stopper), calibration of machine (automatic with sensor), inlet material stopper (fg valve), feed tank (direct connected), feed tank overflow controller (float type), material feed in m-tank (automatic), heating arrangement in m-tank (water bath system), material shaker in m-tank (electrical shaker), bath temperature & material temperture monitoring system (full auto-control with ccp), electric spply (230 cm v/50hz), tempreture controller (pid), machine dimensions (250 cm x 100 cm x 210 cm (approx) and net weight (300 kg). etc all complete with isi marked., supply & installation of automatic linear capping machine including with output/hour (any size with range 4000 bpd), direction of movement (left to right ), machine dimensions (180 cm l x 90 cm w x 170 cm h (approx)), sensor (panasonic), pneumatic accessories (spac) and no bottle- no cap (yes). etc all complete with isi marked., supply & installation of automatic round bottle sticker labelling machine including with output/hour (10000 bpd), direction of movement (left to right), controlling (micro controller base mm interface), conveyor motor (0.25 hp/415 v/ 50 hz), pressing device motor (60 watt / 220 v/ 50 hz), servo motor (750 watt), label accuracy (+/-1mm), gap sensor (u-type), bottle spacer (electronic), variable speed (40 bpm-max), hmi & plc (7 inch coloured touch pad type), pneumatic (spac), pressure roller (sillicon), adjustment (lead screw), label size (up to 100 mm width), bottle dia (up to 120 mm dia), batch counter (yes) and online data indication (yes) etc. all complete with isi marked., supply & installation of air compressor including with type (reciprocating), tank volume (250 ltr), pressure range (10 kg/ cm 2), no of head-(02 nos.), type (industrial) and operation (continue) etc. all complete with isi marked., supply & installation of induction sealing including with automatic induction sealing machine etc. all complete with isi marked., supply & installation of turn table including with 750 mm dia turn table moc ss304, motor - 0.5 hp/440 vac, vfd - invt/delta and model -cgmp etc. all complete with isi marked., supply & installation of packing conveyor including with 10 feet long packing coveyor, width of conveyor 300 mm, motor - 0.5 hp/440 vac and model - cgmp etc. all complete with isi marked., supply & installation of auto honey feed pump including with automatic honey feed system for filling machine from plant etc. all complete with isi marked., supply & installation of bottle washing machine including with automatic bottle cleaning machine tilting action type etc. all complete with isi marked., supply & installation of particle inspection table including with online particle checker etc. all complete with isi marked., supply & installation of online printer including with online ink jet printer etc. all complete with isi marked., supply & installation of slate chain conveyor including with ss304 slate chain conveyor, motor - 0.5 hpx 3 nos, vfd - 3 nos and guider - as per design etc. all complete with isi marked., supply & installation of automatic wax sheet foundation mill including with sheet making roller set (cell size 5.4 mm, length ,600 mm, dia 200 mm), cold water circulation system 0.5 hp, conveyor belt length - 300 mm, sheet cutting system, water cooling system 1.5 - ton cap, wax malting tank, wax filtration system, ss tray, ss bucket, operation by hmi, dat

Central Government/Public Sector

CTN :45471395

07 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For supply and commissioning of micro controller based electronic speed indicating & recording system (consisting of 02 nos gauges out of which 01 no gauge should be recordable) as per rdso spec.mp.0.3700.07 rev.07 august-2017, dial range - 0-120 kmph, working voltage- 24 vdc, suitable for trackmachine, each set consisting of: 1. recorder cum indicator (master)-01 no. 2. additional indicator (slave) -01 no, 3. pulse generator-01 no, 4. junction box -01 no, 5. connecting cable-01 set, 6. mounting accessories- 01 set, required for track machine. note: 1. material supplied by firm should be fitted on machine without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully. after commissioning a certificate to be issued duly signed by machine incharge and sse/line. 2. agency should have done the similar type of work on indian railway earlier. they should submit proof of the same with their offer else their offer will not be considered. [ warranty period: 30 months after the date of delivery ] ]

Edc Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector