Edge Angle Tenders

Get complete information related to latest Edge Angle Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Edge Angle Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Edge Angle Tenders .

Filter

Loading....

Get Tender in Email

CTN :42681393

05 Dec, 2025 5.00 Lacs

Hisar - Haryana

Tender For corrigendum : supply of various tools at govt. iti nalwa - wood work technician, bevel square 150 mm (i) blade material- stainless steel, hardness- 418 hv to 460 hv(ii) stock material cast iron, fully painted(iii) wing nut and bolt material: m.s.(iv) measuring range 0 to180 (v) approx.weight-150gram(vi) operation-for testing any angle, claw hammer 500 gram (i) head made by heat treated steel, hardened upto 46 to 58 hrc with curved claw.(ii) handle 300mmx30mm dia.made by hardwood(rosewood)(iii) operation-for striking and nailing, hand brush for cleaning 450mm (i) bristle material: mexican fibre, sisal fibre, bristle length 70mm, tampico fibre, fixingin hardwood/ plastic(ii) operation-for workbench cleaning, mallet medium size (i) handle size- over all length- 385 mm, toe side- 40mm(w), 25 mm(t), heel side- 30 mm(w), 22 mm(t)(ii) made by hardwood (rosewood)(iii) operation- for striking, carpenter mortise gauge (i) adjustable spur strip 300 x 8 x 8mm 2mm, made by brass(ii) fixed spur strip size 20x8x8mm 1mm(iii) adjustment thumbscrew length15mm 2mm, dia. 15mm 2mm and shank 9mm 2mm, made by brass(iv) brass pull side and thumbscrew to enhance in gauge (v) operation-for marking along and across the grain for double line (mortise) , marking knife (i) overall length tip to handle end 200mm 2mm(ii) blade length 65mm 5, width-25mm 2, thickness- 4mm 1mm(iii) tang length-20mm, thickness 4x4mm square(iv) blade material high carbon steel, marking point sharp and 60 degree angle for accurate marking(v) handle length120mm 5,diameter15mm 2 and gripping point 10mm 2mm(vi) handle made of hardwood (rosewood)(vii) ferrule length15mm, dia.10mm,material m.s.gauge 18swg.(viii) blade hardness-60hrc(ix) operation-for marking, mortise chisel (set of 3 ) (i) overall length 250mm 5mm(ii) mortise blade width 6mm, 10mm, 15mm, thickness 15mm, cutting edge angle30 - 35 ,neck to cutting edge length150mm 4mm, tang length 40mm 2mm, uppersize- 4x4mm, lower 2 x 2mm 1mm(iii) blade length 100mm 3mm each.(iv) handle length120mm 5mm, handledia. 25-30mm 2mm, material hardwood (rosewood)(v) ferrule size length25mm,dia. 20mm,18 swg. material:m.s.(vi) steel hoop dia.-20 ,thickness-5mm 1mm, material:m.s.(vii) blade material, high carbon steel(viii) blade hardness 55 57 hrc(ix) operation-for chiselling, electric heater (i)1000/1500wattelement,standdimensions(lxwxh)-250x250x85mm(ii) madeofironheatingplatesize-200mm,heatingplatematerial-chinnimitti,nichromewirewithsturdytopoperation-for absorbing moisture ofwood, twist drill bits (set of 4 ) 6,8,10,12mm (i) cuttingangle-30 (ii) hardness:760 hrc to 900 hrc(iii) material: high speed steel(iv) operation-for drilling, cabinet scraper (i) dimensions: length-100mm ( 1) width-100mm ( 1) thickness-1mm min.(ii) material: spring steel(iii) wooden handle size-110x30x20mm,material:hardwood(rosewood),fitted with rivet(iv) operation-for scrapping, gauge chisel, scribing (set of 5 ) 6mm,10mm,12mm,16mm,20mm (i) blade material: high carbon steel(ii) cutting angle: 25 5 (iii) blade hardness- 55 to 61 hrc(iv) operation-for scribing , plumber, item name :-"v" block pair 7cm with clamp (i)size: length 7cm, width 45mm, height 45mm.(ii) material: hardened steel or cast iron(iii) v-groove angle: generally 90 degree , item name :-"v" block pair 15cm with clamp (i) sizelength: 15cm. width 75mm, height 75mm(i) material: hardened steel or cast iron(iii) v-groove angle:- generally 90 degree, item name :-bench vice 150mm (i) jaw width - 150mm ,jaw opening capacity: 150-175 mm(ii) jaw depth-70-85mm(iii) material:- cast iron body.(iv) weight: 15 - 20 kg(v) spindle :- mild steel(vi) handle : carbon steel or alloy steel(vii) thread type: acme thread (square thread)(viii diameter: around 20-25mm(ix) length: 250mm to 300 mm, item name :- metal-l 15cm (i)type : metal l square(ii) size : each arm of the l 15cm (150mm) width-20 mm(iii) material : stainless steel or carbon steel(iv) shape : 90 angle between two arms(v) accuracy : 0.01mm (vi)finish : anti rust coati

CTN :42917362

05 Dec, 2025 NA

Ranga Reddy-T - Telangana

Tender For supply of plate rack c c--chlorinated polyvinyl chloride (cpvc) pipes for potable hot and cold water distribution supplies (v2) as per is 15778 (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , hydraulically regulated door closers (q3) , floor drain traps (q3) , stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , towel rail / ring for bathroom (q3) , connection pipe with nuts (v2) (q3) , m - seal as per is 9197 (q3) , ptmt tap fitting (q3) , hasps and staples as per is 363 (q3) , stainless steel butt hinges as per is 12817 (q3) , pvc gitti (q3) , curtain pipe, sider and mounting bracket (q4) , urinal bowls as per is 2556 (part 6) (q3) , towel rail / ring / rack / hooks for bathroom (q3) , teflon tape , stainless steel grating , grating dome , ptmt waste coupling , ptmt grating round , ptmt pillar cock fancy , ptmt bib cock fancy , cp brasstoilet paper , brass spindle , ptmt jet spray , ptmt alloy cabinet mirror , mirror cabinet , corner glass shelf , glass shelf , ptmt float valve , pvc sink waste coupling , pvc internal fitting for low level cistern , cp brass jet spray , urinal waste pipe , pvc urinal waste pipe , pvc waste pipe , corrugated waste pipe , cp brass waste coupling , stainless steel plate rack , door handle aluminum , bow handle aluminium , stainless steel bow handle , door stopper , stainless steel handle , ms sliding door bolt , ss sliding door bolt , tower bolt stainless steel , sliding door bolt aluminum , decorative poweder coated bracket , float glass , frosted glass , glass pane , glass pin headed , looking mirror , mirror for bathroo , looking marrior , opc , ms helical spring door closer , paint brush , black screws , mix sizes of ms wire nails , oil putty , rubber-based adhesives , solvant cement , silicon sealant , hessian based bituminous waterproofing membrane i , mirror for bathroom , aluminium plain sheets , gi nipple 20mm size , emery cloth , laminated sheets , ptmt stop cock 20mm . , paint , obd , turpentine oil , thinner , letter writing brush , ss waste coupling , water based wall primer , pvc waste pipe for sink , plastic seat cover , brass waste coupling , white portland cement //bid details2 / 129

CTN :42883116

03 Dec, 2025 NA

Delhi - Delhi

Tender For supply of 20 inch with 06mm thick , cp brass towel rail 18 inch. , cp toilet paper holder , ss soap dispenser 400ml , glass sheet plain 5 mm thick transparant size 8 feet x4 feet , ss plate rack 24 inch x 24inch x10 inch 02 mm thick , door handle set with double action single lever mortice lock , aluminium sliding door bolt 250 mm long, rod not less than 16mm dia, isi marked , front glass shelf size 500 x125mm x 06mm thick with chromium plated frame , gauge wire woven 16 mesh 90 or 120 cms wide 1. 4mm apperture and 0. 36mm dia , prelaminated particle board 12 mm thick of size 8 feet x 4 feet. , plywood 12 mm thick of sixe 8 feet x 4 feet , block board 19 mm thick of size 8 feet x 4 feet , ss kitchen sink double bowl overall size 37 inch x 18 inch x 09 inch with 02mmm thick bowl size 16 inch x14 inch x 09 inch. , prelaminated particle board 19 mm thick of size 8 feet x 4 feet , plywood 6 mm thick of size 8 feet x 4 feet , float valve pvc 20mm complete set along with bowl and rod , ewc single piece vitrous china ware complete , sprindle valve half turn 15 mm , float valve pvc 15mm complete with suitable rod and ball , china ware glazed water closet euorpean type with s trap110mm x110mm , helical door spring 300mm , glass self assembly consisting of 5. 5mm thick steel glass shelf 12 cm chromium plated bracket guard and railing 60 cm long complete , gi union 25mm isi mark , china ware glazed water closet euorpean type with p trap , floor door stopper of aluminum alloy body at tongue anaodised overall length 140mm with hard drawn spring , tubing gi med gde 25mm dia , ss butt hinges 100 mm , waste coupling cp brass 40 mm , paint synthetic enamel smoke gray first quality in 04 ltr container , door handles alum alloy anodis 150mm , cp brass jet spray with tube 15mm , fevicol , polish french , gi tubing medium grade 15mm internal dia , gi tee 20mm isi mark , synthetic enamel paint white 4 ltr pack , plywood 3 mm thick 8 feet x4 feet , gi tubing medium grade 20 mm dia , paint og , s s butt hinges 75 mm, isi marked , mild steel sliding door bolt clipt type 300 mm long, rod not less than 16mm dia, isi marked. , ss handle 28mm dia 18 inch long , gi union 20mm isi mark , gi elbow 25mm , gi tee 25 mm isi mark , gi reducing socket 15 x 20 mm isi mark , gi nipple 15mm bore x 150 mm long isi mark , pvc waste coupling 32mm , gi socket 25mm isi mark , gi tee 15mm isi mark , cp brass extention nipple for 15mm bore 65mm long , gi union 15mm isi mark , peg hook aluminium cap hook for mirror 6 inch to 9 inch , gi reducing socket 15 x 25mm isi marked , gi elbow 20mm isi mark , gi elbow 15mm isi mark , teflon tape big size , lock for almirah six liver 12x06x06cm , cp handle for almirah 42mmx128mm , gi socket 15mm isi mark , gi nipple barrel size of 20x100mm , aluminum anodised 40 mm dia cupboard knobs , glass putty , magnetic catcher made of aluminum, suitable for cup board shutter size 2 inch , teakwood beading, 4mm thick, 20mm wide , gi socket 20mm isi markcp brass health faucet with tube for europeon type wc with 1. 5 mtr long pipe. , water storage pvc tank 1000 ltrs cap triple layer, heat retardant,, water storage pvc tank 500 ltrs cap triple layer ,heat retardant, s s connection for gyser inlet and outlet 450mm x15mm, cp connection for geyser 15 x 600 mm, cp brass two way angle cock with bib tap 15 mm, ss plate rack 36 inch x 36 inch x 10 inch with 02mm thick, bathroom mirror cabinet 555 x 350 x 120 mm pvc white colour, pvc mirror cabinet 450 x 350x120mm pvc complete set, corner glass shelf size 300mm with chromium plated frame, hydraulic door closer universal 1000mm aluminium cost body isi mark, stainless steel //bid details2 / 95

Loading, Please wait...

Edge Angle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors