Latest edge angle Tenders | Government edge angle Tenders

Corporations And Associations And Others

CTN :41795632

19 Sep, 2025 83.9 Thousand

Panchkula - Haryana

Tender For pf of 1mm m.s. sheet door with frame of 40x40x6mm angle and 3mm m.s. gusset plates at the junctions and corner, all necessary fittings complete, including applying a priming coat of approved steel primer (using m.s. angle 40x40x6mm for diagonal brace

Central Government/Public Sector

CTN :41798457

01 Oct, 2025 NA

Malanjahknd - Madhya Pradesh

Tender For supply of heavy duty double wheeled barrow with deep pan body and with solid rubber wheels and ms angle frame, , spare tyre wheel for barrow supplied in item no-1

CTN :41266674

11 Sep, 2025 NA

Kupwara - Jammu And Kashmir

Tender For bid to ras bid to ras bid to ras bid to ras supply of hdpe laminated sand bag of size 75x40 cm sand colour and each bag having weight not less than 60 gms , shs 6 mm thick size 120x120mm x 2.1m long for column with holes as per tech spec and make of tata sail jindal or as per make att , ismb 150 rsj 150 x 75 mm g1 3050mm long for beam conforming to relevant is and make of tata sail jindal or as per make att , ismb 150 rsj 150 x 75 mm g2 2.2m long for beam 2 conforming to relevant is and make of tata sail jindal or as per make att , ismb 125 rsj 150 x 75mm g3 0.40m long for beam conforming to relevant is as per tech spec and make of tata sail jindal or as per make att , 6mm thick ms plate 150x150mm for shs column incl welding knoching cutting and nuts and bolts washer etc , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column , steel roofing trough of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick as per tech spec att , ms hexagonal nuts bolts and washers 12 mm dia 40 mm long. , ldpe sheet 3 m wide weighing 1.00 kg per rm black in colour and shall contain as per tech spec att , red oxide primer conforming to relevant is , synthetic enamel paint colour green ist quality conforming to relevant is as per tech spec att , thinner as per as per tech spec att . sample to be approved before supply. , dry distemper as per tech spec att. sample to be approved before supply , chalk whiting as per tech spec attsample to be approved before supply , paint brush 4 inch make amar or lucky sample to be approved before supply , pre fabricated double shutter steel door of size 1100mm x1900mm made out of 2mm thick ms black carbon sheet as per tech spec att , supply of swivel bullet proof glass glass 610mm x300mm size 72 mm thick as per tech spec att , silicone gel sealent of 01 pack of 400 gms including aplicator gun , ply wood 10 mm thick as per requirement for flat surface , foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , stone aggregate to be crushed rock or gravel 20mm graded confirming to relevant is , manufacturing sand confirming to relevant is as per tech spec att , stone aggregate to be crushed rock or gravel 40mm graded confirming to relevant is as per tech spec att , rapidite quick setting liquid confirming to is 1344-2018 of make acclerec cico fosroc , integrated water proofing compound. , aluminimum straight edge 50mm squre 2mm thick 1800mm long , wooden flat gurmala , water leveling pipe pvc 100 mtr , hand rivet gun machine , drill bit 6mm dia , drill bit 8mm dia , tape measuring metallic 30 m , mason trowel , tasla iron 18 inch , shovel with wooden handle , axe picks with wooden handle , fawda with wooden handle , crobar 5 feet long , rammer with wooden handle of wt 5 10 kg , sieve for sieving fine and crose agg 900 x 1500mm made of angle iron frame with stand , brick hammer 1 and 2 kgs , cutting plier insulate 6 inch , screw driver 12 inch with insulated plastic , pipe wrench 12 inch , pipe wrench 18 inch , adjustable spanner 12 inch , hacksaw frame with 2 blade , hand gloves canvas with isi mark , aluminium sprit level 6 inch , brick line , plumbob

corporations/Associations/Others

CTN :41494061

15 Sep, 2025 NA

Thoothukudi - Tamil Nadu

Tender For replacement of the damaged ms grills with edge angle frame with new ms grills and fixing over the drain water trenches in 0m tg bay of power house building in unit 4

State Government

CTN :41739278

23 Sep, 2025 NA

Porbandar - Gujarat

Tender For civil work material supply, taluka panchayat office, mgnrega yojna, ranavav dist.porbandar. - portland cement, white cement, dry distemper, distemper primer, enamel paint, plastic emulsion paint, coarse sand (zone iii), fine sand (zone iv), stone dust, water proofing materials, c.i. cover and frame 300x300 mm inside, c.i. cover without frame 300x300 mm inside, s.w. gully trap type 100x100 mm, s.w. gully trap type 150x100 mm, t.m.t. bars fe- 415, white lime ( white washing), r.c.c heavy duty non-pressure pipe i.s. class np-3 casted by vertically vibrated technology -900mm dia., r.c.c heavy duty non-pressure pipe i.s. class np-3 casted by vertically vibrated technology -600mm dia., steel hysd, flat back wash basin white vitrious china 450mm x 300mm size, flat back wash basin white vitrious china 550mm x 400mm, gun metal screw down bib tap-15 mm dia, gun metal screw down bib tap-20 mm dia, crushed stone aggregate 40mm to 63mm size, crushed stone aggregate 40mm size, crushed stone aggregate 6mm to 10mm size, r.c.c heavy duty non-pressure pipe i.s. class np-3 casted by vertically vibrated technology -300mm dia., hand broken stone aggregate 40mm size to 63mm size., cast iron (spun) nahni trap .100 mm. inlet and 50 mm. outlet., common burnt clay bricks conventional size, crushed stone aggregates 20mm siz, crushed stone aggregates 10mm size, hand broken stone aggregate 25mm size to 90mm size, plain gi sheet 10 mm thick, paver block m200 grade 60mm thick., hard morrum, quarry spall., mild steel bars, common burnt clay bricks modular size 20x10x10 cm, white bela stone, battens 75mm x100mm., white glazed tiles 15 cm x 15 cm x 6 cm, polished kota stone slab green. 25 mm thick, polished kota stone slab green 30 mm thick, corrugated a.c. sheet 7 mm thick, g.i.barbed wire, m.s. angle, p.v.c. pipes 6 kgf / sq.cm. 20mm dia., p.v.c. pipes 6 kgf / sq.cm. 25mm dia., p.v.c. pipes 6 kgf / sq.cm. 32mm dia.

Central Government/Public Sector

CTN :41488074

16 Sep, 2025 70.5 Thousand

Jhunjhunu - Rajasthan

Tender For corrigendum : supply of plain glasses for welding screen , m-seal c j compound n type. , measuring tape made of steel 3 mtr , holder for welding electrode 600amp , pipe wrench adjustable as per is.no-4003-1978 , steel pad lock 7 levers 50 mm with two key , double end ring spanner chrom vanadium steel chrom plated , jublee clamp for cutting hose , plier combination insulated 8.inchby200 mm product 1611-8n , cutogen no.5 hand cutting blow pipe confirming to is 7653 1975 , hose black colour for gas cutt ing for oxygen gas , allen key set of 09 pcs. 1.5.mm to 10.mm brown finish product , hack saw frame chromium plated tubler adjustable with handle , washer rubber for u seal , paper backed coated abrasive emery paper , hole punch 10.mm to 14.mm , double end open spanner set of twelve pieces 6mm to 32mm , dark glasses for welding screen , welding cable single core aluminium conductor for 600 amp dc current , regulator oxygen two stage with two pressur gauges , cutting nozzle suitable for gas cutting , hitachi portable angle grinder model pqa-100d , bush hard rubber id-19 mm x od-30 mm length-31 mm , pulling and lieting machine 1.6ton pulling 2.6t , bush hard rubber id- 32mm x od-50mm length- 50 mm , araldite in 180 gm tube , grease gun. bucket type. 20.ltrs. , m.s. d. shackle confirming to 6132 part 2-1972 for swl 1.25t , m.s.d-shackle confirming to is-6132 part-2- 1972 , m.s.shackle confirming to is 6132 part 2-1972 , m.s.d-shackle confirming to -6132 part-2-1972 for swl 3.2t , hand screen fibre without glass for welder , hose red colour for gas cutt ing for kacetylene gas ) /bid number : gem/2025/b/6583575 * /dated: 19-08-2025 & & / bid document 1 / 24

State Government

CTN :41713719

11 Sep, 2025 8.17 Lacs

Belonia - Tripura

Tender For providing and fitting fixing of electrical accessories, spare of panel board of different water supply schemes at different locations under dws sub-division, belonia during the year 2025-26. - providing and fitting fixing of spare contact kits without coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., providing and fitting fixing of standard operating coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., supplying and fitting fixing of 4 pole ac control contactor (nhd series) suitable for bch made starter (standard coil voltages are 24, 110, 220/240 & 380/415 v, ac hz)., supplying and fitting fixing of 3 pole power contractor (type-mnx) suitable for 10 hp to 25 hp motor.mnx-25 (for l&t made starter), supplying and fitting fixing of pneumatic timer pn type delay relay-electro pneumatic) suitable for delay of time upto 30 sec. (bch made)., supplying and fitting fixing electronic timer type st-100 (l & t make) suitable for 240/300/415v, 50 hz having ranges for 3-30 secs/12-120 secs., supplying and fitting fixing of single phase preventer on delay 2 sec off delay 7 sec 65 vac asymmetry., providing & supplying of kit-kat rewireable porcelain fuse (cut-out) carrier & base of havells made (delux quality)., a) 63 amps/415 volt, b) 100 amps/415 volt, supplying and fitting fixing of 3 pole power contractor (type-ml) suitable for 10 hp to 25 hp motor.type ml-2 (for l&t make starter), supplying and fitting fixing of thermal timer type gt-200 (l & t make) suitable for 230/250v, 360v, 400/440v, 50 hz for 5-18 secs., supplying and fitting fixing of thermal overload relays mn2 type (directly operated& direct mounting on mnx 9-40 contactor) of l & t made. (suitable for ml/mnx type)., a) for relay range 9-15 a., b) for relay range 14-23 a., c) for relay range 20-33 a., supplying and fitting fixing of thermal overload relays (directly operated& direct mounting on ml-2/3 contactor) having relay range 9-14a/13-21a of l & t made. (suitable for ml-2/ml-3 type)., supplying and fitting fixing of citation-m overload relays (direct mounting with built in single phase protection) having relay range of bch made., a) for relay range 8.9-13.5 a., b) for relay range 13.2-30.00 a/17.4-24.00 a., c) for relay range 22.00-30.00 a., providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) gamair wood/ plywood pannel board for fitting fixing of electrical items, in/c 2 nos ms angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the engineer-in-charge., providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the engineer-in-charge., providing and fitting fixing heavy duty box type (resin filled) power factor correction capacitor l & t make etc. complete as per specification and direction of the engineer-in-charge.i) 5-15 kvar 440 v, supplying isi marked/ taparia make tools for water supply scheme., i) sly wrench, ii) screw driver, iii. pipe wrench, iv. plier, v. hexo frame with blade, providing and fitting fixing of moving iron type, range 0-500 v, 96 mm x 96 mm size ac volt meter ( l & t / ae make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the engineer-in-charge., providing and fitting fixing of moving iron type, range 0-100/0-200 amp, 96 mm x 96 mm size ac amps meter direct reading type ( l & t / ae make) with selector switch and ct coil as a electrical instrument of the pannel board as per specification and direction of the engineerin-charge., providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses), tripl

CTN :41588752

08 Sep, 2025 NA

Ranga Reddy-T - Telangana

Tender For bid to ras supply of commercial cpvc pipe fittings (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , chlorinated polyvinyl chloride (cpvc) pipes for potable hot and cold water distribution supplies (v2) as per is 15778 (q3) , hydraulically regulated door closers (q3) , stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , floor drain traps (q3) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , towel rail / ring for bathroom (q3) , connection pipe with nuts (v2) (q3) , toilet seat covers (v2) (q4) , hasps and staples as per is 363 (q3) , stainless steel butt hinges as per is 12817 (q3) , door handles as per is 208 (q4) , pvc gitti (q3) , curtain pipe, sider and mounting bracket (q4) , m - seal as per is 9197 (q3) , taflon tape as per is 14635 (q3) , ptmt tap fitting (q3) , pvc pipe 40mm , upvc tee 75mm dia , upvc tee 75mm diameter , concealed stop cock spindle no.-03. , concealed stop cock spindle no.-04 , concealed stop cock spindle no.-05 , cp brass waste coupling 40 mm . , cp brasstoilet paper holder flip type , cp brass jet spray with 1.0 mtr tube , stainless steel grating round 5 inches , grating dome 150 mm , ptmt waste coupling 31 or 32 mm . , ptmt waste coupling 38 or 40 mm. , pvc sink waste coupling 100mm dia , pvc internal fitting for low level cistern , urinal waste pipe 32mmx750mm , pvc urinal waste pipe 31 or 32 mm x 800 mm , pvc waste pipe 32 x 800 mm spring type for whb , pvc waste pipe for whb 32 x 1150 mm , corrugated waste pipe 31 or 32mm x 800 mm . , corrugated waste pipe 38 or 40mm x 800 mm . , ptmt grating round 125 mm with hole . , ptmt grating round 125 mm without hole . , ptmt pillar cock fancy roman handle , ptmt pillar cock fancy type , ptmt push cock 15mm short body , ptmt jet spray with 1.00 mtr tube. , ptmt alloy cabinet mirror , ptmt bib cock fancy , ptmt float valve size 15 mm , ptmt float valve size 20 mm , ptmt float valve size 25 mm , rubber-based adhesives , solvant cement adhesive , stainless steel bow handle , door handle aluminum 200mm , bow handle aluminium 75mm , bow handle aluminium 100mm , bow handle aluminium 150mm , stainless steel handle 75mm , stainless steel handle 200mm , stainless steel plate rack , pvc tank cover , door stopper 50 mm alumnium , door stopper 4 inch , ms door stopper , ms sliding door bolt 250mm , tower bolt stainless steel 100mm , tower bolt stainless steel 125mm , tower bolt stainless steel 150mm , tower bolt stainless steel 200mm , sliding door bolt stainless steel 250mm , sliding door bolt stainless steel 300mm , sliding door bolt aluminum 250mm , sliding door bolt aluminum 300mm , bracket for curtain rod of size 25mm diameter , bracket for curtain rod of size 20mm diameter , powder coated ms corner l-brackets , ss wire mesh , aluminium wire mesh , aluminium plain sheet , float glass , frosted glass , glass pane ordinary transparent sheet , glass pin headed , corner glass shelf , glass shelf with brass bracket , mirror cabinet , mirror for bathroom with ptmt frame , looking mirror as per mes drawing , glazed grade linseed oil putty , helical spring //bid details 2 / 120

State Government

CTN :41719915

04 Sep, 2025 30.00 Lacs

Multi City - Bihar

Tender For biharsupply of machines and laboratory equipments for mechanical & civil engineering in the premises of government engineering college, kaimur - demonstrate & study of steam boilers and its mounting & accessories, to learn the mechanical properties of engineeing materials. (chart/, flex), to learn the working of steam power plant. (chart/ flex), to learn the working of vapour compression refrigeration system., (chart/ flex), to learn the working of impulse steam turbines. (cut section model), to learn the working of gas turbines. (chart/flex), to learn the working of reaction steam turbines. (cut section model), to learn the working of vapour absorption refrigeration system, hemispherical sectional models of screw threads, , standard bolt, , bolts of four types, , foundation bolts, , locking arrangement of bolts, , rivetted joints-wooden, , bush bearing, , plummer block or pedestal bearing, , foot step bearing, flexible coupling, , flanged coupling, , stuffing box, , connecting rod , spark plug, , sine bar complete set, (a) sine bar (100mm, hardened tool steel), (b) sine bar (200mm. hardened tool steel), sine centre complete set, sine centre complete set ( roller distance 200mm centre height : 65mm or roller distance 300mm, centre height 75 mm), vernier bevel protector, vernier bevel protector( blade edge angle 60 deg , 45 deg edge, blade length 150mm, ) range = 360deg, lc: min, it is capable of ), lathe tool dynamometer, x direction measuring range : 0 ± 3000 n ( 0. 1 n sensitivity ), y direction measuring range : 0 ± 2000n ( 0.1 n sensitivity ), z direction measuring range : 0 ± 2000n ( 0.1 n sensitivity ) measurement : x, y & z direction force measurement simultancously. data recording, signal conditioner : gpds signal conditioner accuracy = ± 0.5 %, computer: window operating system, software “ i t “ lathe tool software exclusively designed and developed for measuring the forces in x. y & z direction during operation., software features are :, (a) digital display of forces, (b) graphical display of forces, (c) data recording, printing, transfer to ms excel, dimensions : sensor ( 55 x 125 x 55 mm ) 20mm x 80mm segment provided for fitting in the tool holder of lathe machine, power requirement : 220 v 1 phase, 50 hz, drill tool dynamometer, axial load capacity : 500kgf. torsional load capacity 50 kf. cm. computer: window operating system, software “ dt drilling tool software exclusively designe and developed for measuring axial & torsional forces developed during drilling operation, software features are :, (a) digital display of forces, (b) graphical display of forces, (c) data recording. printing, transfer to ms excel, vernier gear tooth caliper (0.02mm resolution, mi-26), slip gauge complete set slip gauge block set, metric, 87 or 103 block of grade 1 steel, optical flat, optical flat, l=12mm, d=45mm, 0.2um, optical flat, l=12mm, d=45mm, 0.1um, optical flat, l=15mm, d=60mm, 0.2um, optical flat, l=15mm, d=60mm, 0.1um, optical flat, l=0.5". d=1.8", 0.000008", optical flat, l=0.5". d=1.8", 0.000004", optical flat, l=0.6", d=2.4", 0.000008", optical flat, l=0.6", d=2.4", 0.000004", vernier calliper 300 mm, vernier calliper (digital) 150mm, micrometer outside 0-25mm, digital micrometer (25mm, 0.001mm resolution), journal bearing test rig, description: the apparatus consists of a plain steel shaft excavated in a bearing and directly driven by a fhp motor. the bearing is freely supported on the shaft and scaled at the motor end. the speed of the motor is controlled by the speed control uniy. manometer is mounted on bearing to measure the pressure at different position around the circumference, bearing is free and can be adjusted at any position of circular scale. the bearing can be loaded by attaching weights to the arm supported beneath it., technical details:, journal : diameter 50 mm bearing : diameter 55 mm weights : 4 weights, motor : variable speed fhp motor, control panel :

CTN :41705475

25 Sep, 2025 9.84 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For supply of portland cement , c c block size 40x30x20 cm , structural steel , iron cutter blade 100 mm , welding rod , ms tubler pipe 80mm 50mm dia 40 mm dia ms pipe 5mm 8mm thick gusset plate and 12x 50 mm size nut bolt , poly carbonate sheet 16mm thick , self screw 40 mm , 60 mm thick puf pannel , ms flate 40x6 mm , exterior paint , cement primer , 1 mm thick ms sheet door 90x2 point 10 m with frame 40x40x6mm angle iron , paint brush 100mm , paint brush 75 mm , synthetic enamel paint , red oxide primer , hydraulic excavator for earthwork , loader for earthwork , coarse sand 1 point 74 plus 1 pont 06 plus 7 point 97 plus 8 point 88 plus 3 point 13 22 point 78 cum , aggregate 20 mm nominal size 3 point 48 plus 2 point 11 5 point 59 cum , hard stone for rr masonry

Edge Angle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector

State Government

State Government