Latest electrical circuit Tenders | Government electrical circuit Tenders

State Government

CTN :45673274

15 Jul, 2026 34.70 Lacs

Cachar - Assam

Tender For supply of digital vibration tester , electric tester 220v , glass cutter , multimeter , clamp meter , vehicle electrical circuit tester , battery regulator tester , bty bt 780 test analyser 12 or 24v

CTN :45690757

02 Jul, 2026 5.78 Lacs

Delhi - Delhi

Tender For a.r. & maintenance of 196 hmps flats at south avenue under sub div-1 of ded-201, new delhi. (sh: replacement of defective electrical accessories i/c supply of material).subwork/packages:replacement of defective electrical accessories i/c supply of material. - supplying, installation, testing & commissioning of flood light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage : input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range - 5 deg. to 50 deg. centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%, thd < 10% as per iec 61000-3-2, p. f.≥0.95, ip-66, ik-10, cri >70, under voltage and over voltage protection, emiemc as per cispr -15, lenses for beam angle 30 deg- 120 deg as per the application and the project requirement deg., suitable tilt able fitting, life time (led, driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000°k/4000°k /5700°k /6500°k (as per ansi bin), sdcm(standard deviation color matching) <5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 105 <120 lm/watt output. lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90°c). (make: havells/ wipro/ philips/ crompton/ regent) 1.1 50 watt , 1.5 sq mm frls pvc insulated single core copper conductor cable., , 4 sq mm frls pvc insulated single core copper conductor cable., , 6 sq mm frls pvc insulated single core copper conductor cable., , s.p. 5/6 a, one way modular switch, , s.p. 5/6 a, two way modular switch, , s.p. 15/16 a, one way modular switch, , 3 pin 5/6 a modular socket outlet, , 6 pin 15/16 a modular socket outlet, , modular bell push, , stepped type modular fan regulator (2 module), , telephone socket outlet modular type, , t.v. socket outlet modular type, , modular blanking plate, , modular base & cover plate for 1 or 2 module, , modular base & cover plate for 3 module, modular base & cover plate for 4 module, , modular base & cover plate for 6 module, , modular base & cover plate for 8 module, , modular base & cover plate for 12 module, , modular gi box for 2 module, , modular gi box for 3 module, , modular gi box for 4 module, , modular gi box for 6 module, , modular gi box for 8 module, , modular gi box for 12 module, , 3 pole mccb, 125 a, 16ka, , 6 amps. to 32 amps. ratings, sp mcb, "c" curve, 10 ka breaking capacity, , 40 amps., 2 pole isolator, , 63 amps., 2 pole isolator, , 100amp., 4 pole isolator, , supply of led batten light (system lumen efficacy ≥105 <120 lm/watt) of following body materials. powder coated die cast /extruded aluminium body (thickness > 1.20 mm) (make: havells/ wipro/ philips/crompton/regent), , 18-22 watt, , 40 watt, , supply of led down lighter (smd type) (system lumen efficacy ≥ 105 <120 lm/watt) of following body materials. powder coated die cast/extruded aluminium body including trim with aluminium reflector (make: havells/ wipro/ philips/ crompton/regent), , 5-7 watt, , 8-10 watt, , 12-15 watt, , supply of led bulb 9 watt b-22/e- 27 type (3 star & above) (white/yellow colour) (make: havells/ wipro/ philips/ crompton/regent), , less credit for damaged and dismantled material received from the work :-, , 5/15/16 amp. switch/socket/bell push/tv antenna socket/telephone socket/dp switch/fan regulator (assorted), , pvc

CTN :45690396

02 Jul, 2026 25.59 Lacs

Bhubaneswar - Odisha

Tender For annual maintenance contract of installed e&m equipments in central drug standard control organization, gothapatna, bhubaneswar for financial year 2026-27. - & minor repairs of cctv & including, & minor repairs of kone lift i/c, (standard deviation colour matching), (standard deviation colour matching), (t.c.). manufactures word mark/, (unified glare rating) < 19, flicker, / 6500°k (as per ansi bin), sdcm, /6500°k (as per ansi bin),sdcm, <3,, <5, maximum power consumption, >85%, input voltage: 140-270 volt ac,, >85%, operating voltage ac 140-270, >85%, operating voltage ac 140-270, >85%,thd < 10% as per iec 61000-, 1 2,22,718.00 job 2,22,718.00 mr, 1 no 13 passenger lift,, 1.5 sq. mm frls/hffr, pvc, 10% , p. f.≥0.95, ip20, cri ≥80, ugr, 10.1 18 watt 10 618.00 each 6,180.00 mr, 10322 with driver as per the, 11.1 36 watt 10 2,103.00 each 21,030.00 mr, 12 13,877.00 month 1,66,524.00 mr, 12 16,961.00 month 2,03,532.00 mr, 12 21,586.00 month 2,59,032.00 mr, 12 24,086.00 month 289032 mr, 12 24,128.00 month 2,89,536.00 mr, 12 31,890.00 month 382680 mr, 12 4,490.00 month 53,880.00 mr, 12 53,452.00 month 6,41,424.00 mr, 125 kva dg set with amf and, 15u rack 1 13,330.00 nos 13,330.00, 2 x 6 sockets 16a power distribution, 2.5 kv with short & open circuit, 3-2, p. f.≥0.95, ip-66,ik-10, cri >70,, 39.23.3, 4000°k/ 5700°k /6500°k (as per ansi, 61000-4-5, driver efficiency, 70% of initial lumen maintained till life, 70% of initial lumen maintained till life, 90°c)., 90°c)., above 90°c)., aluminium body including trim, aluminium body with driver as per the, and earthing etc. as required with, annual comprehensive maintenance, annual comprehensive, maintenance, annual comprehensive, maintenance, approved by engineer-in-charge as, approved by engineer-in-charge as, approved by engineer-in-charge as, as required, as required., at gothapatna as required, attached & following staff., basis as per terms & conditions, basis) including servicing, preventive, bin), sdcm (standard deviation, bis standard complete in all respect, bis standards and trade mark, body material with pmma and, cable and earthing etc. as required, cable and earthing etc. as required, cables, nvr, switch, cctv camera,, cct 3000°k / 4000°k / 5700°k, cdtl building etc. as reqd., centigrade, internal surge protection of, certificate (t.c.). manufactures word, circuitry) of minimum 50000 burning, colour matching) <3,, commissiong of pa, rectification and, comprehensive and repair, comprehensive and repair, comprehensive and repair, condition at cdtl office building etc, contract (as inspection on monthly, copper conductor single core cable, day electrical complaints, complaint, distribution pane, 250 kva substation,, down lighter (round/ square/, driver & electrical circuitry), of, dsr-25, efficacy ≥105 <120 lm/watt) supplying, ends , cct 3000°k / 4000°k / 5700°k, ends as per lm80 extrapolation ies, entire lift , etc in cdtl office building, etc in cdtl office at gothapatna as, extrapolation ies tm-21-11 report,, fixture shall be confirming to relevant, fixture shall be of relevant bis, fixtures as per bis shall be submitted., fixtures as per bis shall be submitted., fixtures as per bis shall be submitted., free, (flicker should be below 5 %), life, frequency 50/60 hz, operating temp, general shift) at cdsco on monthly, hours with70% of initial lumen, housing such that led, housing such that led junction, housing such that led junction, i/c external connections with 1.5, in all respect i/c external connections, inspection on monthly basis) including, inspection on monthly basis) including, insulated copper conductor single core, insulated copper conductor single core, internal surge protection of 2.5 kv with, ip surveillance systems i/c maintance, ip20, cri ≥80 , ugr (unified glare, junctiontemperature shall not rise, knocked-down condition (ckd) shape,, led panel light 2x2 ft. (system lumen, lenses for beam angle asper iesna, life time (led, driver &

State Government

CTN :45611175

02 Jul, 2026 49.67 Lacs

Multi City - Karnataka

Tender For supply of materials and equipment to avishkar lab in 5 kps schools & 2 adarsha vidyalaya functioning under samagra shikshana karnataka in ballari district/call-4 - insulating tape (bly), bo motor wheels (bly), copper tape- 5mm/10mm wide (bly), solar panels- 12v 10w (bly), solar panels- 6v, 100mah (bly), drone kit (bly), robotics diy kit (bly), servo motor tester (bly), motor driver l298p (bly), rpm bo motor 150 (bly), servo motors (small servo plastic gear) (bly), servo motors (continuous metal gear servo 360) (bly), servo motors (small servo metal gear) (bly), servo motors (bly), dc motor (bly), stepper motor with driver board (bly), rf modules tx & rx 315 mhz ask (bly), rfid reader tags (bly), power bank (bly), sound sensor (bly), water flow sensor (bly), colour recognition sensor (bly), force pressure sensor (bly), temperature and humidity sensor module (bly), temperature sensor (bly), flex sensor (bly), rain drop sensor (bly), metal touch sensor module (bly), touch sensor (bly), soil moisture sensor module (bly), big sound microphone module (bly), relay module - 5v 10a - 1 channel relay module. compatible with arduino (bly), relay module - 5v 10a - 2 channel relay module. compatible with arduino (bly), pulse rate heart sensor (bly), pir motion detector module (bly), triple axis accelerometer (bly), ultrasonic sensor module hc-sr-04 or compatible (bly), ir transmitter/ receiver (bly), mq-135 air quality sensor (bly), mq-8 hydrogen gas sensor (bly), high sensitivity co carbon monoxide sensor detector (bly) mq 7, mq-6 liquified petroleum gas sensor (bly), mq-5 methane liquified gas sensor (bly), mq-4 methane natural gas (bly), mq-3 alcohol - ethanol sensor (bly), mq-2 smoke detection (bly), humidity sensor (bly), triple axis magnetometer (bly), ir sensors, obstacle avoider sensor module (bly), capacitative touch switch module (bly), capacitative touch module (bly), button switch set (set of 100 pieces ) (bly), diodes and transistors kit (bly), timer ic - lm 555 (bly), leds (white) (bly), leds (yellow) (bly), leds (blue) (bly), leds (green) (bly), leds (red) (bly), rgb leds (bly), jumper cable female-female (bly), jumper cable male-female (bly), jumper cable male-male (bly), hook-up wires (bly), battery clips with dc jack (bly), alligator connectors (bly), vibrating motor (bly), wemos d1 r2 (bly), node mcu (bly), dc plastic gear motor with wheel (bly), motor driver module (bly), active buzzer - big 5 volt (bly), active buzzer - small 5 volt (bly), keypad (bly), ldr module (bly), laser diode emitter (bly), gps (bly), gsm (bly), bluetooth module (bly), led matrix module 8x8 (bly), piezoelectric plate (bly), water pump module (bly), linear voltage regulator (bly), capacitor kit (bly), resistor kit (bly), esp32 (bly), battery (bly), usb cables - usb cable set (mini, 12 inches or more) (bly), usb cables - usb cable set (a to b, 12 inch or more) (bly), serial interface adapter module iic/i2c (bly), lcd display 16x2 (bly), male berg strip, 2.54mm pitch, 40 pin single row, breakable pin (bly), female berg strip, 2.54mm pitch, 40 pin single row, breakable pin (bly), fr2 a grade material (80 x 55mm) (bly), fr2 a grade material (140 x 90mm) (bly), self-adhesive proto shield (bly), solderless 800 pin breadboard (bly), solderless 400 pin breadboard (bly), raspberry pi 3 model b plus (bly), arduino mega or equivalent (bly), arduino nano or equivalent (bly), arduino uno or equivalent (bly)

Corporations And Associations And Others

CTN :45523190

19 Jun, 2026 4.76 Lacs

Delhi - Delhi

Tender For provision of new led street lights with allied accessories on existing poles at various dark spots in saidulajab ward no 160 under south zone - led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy >135 lm/watt). supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, frequency 50/60 hz, operating temp range -5 0c to 50 0c, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%,thd 10% as per iec 61000-3-2, p. f. 0.95, ip-66,ik-10, cri >70, under voltage and over voltage protection, emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitary) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation color matching)5, maximum power consumption should not more than the specified rating and fixture shallbe of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductorsingle core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 testreport and all testing required for led fixturesas per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge asper requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). 45 watt , supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm

Corporations And Associations And Others

CTN :45523194

19 Jun, 2026 4.67 Lacs

Delhi - Delhi

Tender For provision of led light fittings with accessories at various locations in ward no. 167 khanpur, under south zone. - supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm, led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy 135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri 70 , under voltage and over voltage protection,emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c). 45 watt

CTN :45567555

03 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply, installation, testing, commissioning, and training of a package dental equipment system at iisc, bangalore.-chair dental chair unit , dentist stool , dental operating light (led) , cabinetry and side storage units , spittoon/cuspidor assembly , three-way syringe system , foot control pedal , in-built water purification , monitor display with mount , air rotor handpieces , micromotor handpiece , ultrasonic scaler attachments , curing light unit , saliva ejector holders , instrument trays and cassette holders , disposable cup dispenser , headrest covers and armrest covers , patient bib holder , suction tubing sets , waterline tubing accessories , led chair light handles , handpiece lubrication kit , foot pedal , waterline cleaning tablets/solutions , lubricating oil for handpieces , dental diode laser unit , touchscreen control console , teeth whitening machine/led whitening accelerator , power cord , laser delivery handpiece and fiber optic system , adjustable articulating arm/stand , foot switch/foot pedal , mobile trolley/cart for laser unit , laser safety goggles for dentist, assistant, and patient , fiber optic tips and tip holders , whitening gel syringes applicator trays , teeth whitening gel , built-in control panel , handpiece / scaler handle , power cord , foot control pedal , tip wrench , water tubing set , handpiece holder , scaling tips , dental intraoral x-ray unit , x-ray tube head , control panel / timer unit , articulated arm / support arm , mobile stand , exposure switch , high frequency generator , laptop , imaging software license , power cord , foot pedal , rvg sensor (size 1 & size 2) , sensor holder kit , usb interface module , dental intraoral x-ray unit , x-ray tube head , control panel / timer unit , articulated arm / support arm , mobile stand , exposure switch , high frequency generator , laptop , imaging software license , power cord , foot pedal , rvg sensor (size 1 & size 2) , sensor holder kit , usb interface module

CTN :45488625

23 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For purchase of electrical circuits and machines practical lab equipment for ece department - item name, dc voltmeter analog (0-1) vclass 1.0 ( 1%full scale )accuracy (1000), dc voltmeter analog (0-10) vclass 1.0( 1%full-scale)accuracy (1000), dc ammeter analog (0-500) aclass 1.0( 1%full-scale)accuracy (800), dc ammeter analog(0-10)maclass 1.0 ( 1%full-scale) accuracy (800), auto transformerinput -single-phase, 230v/240v, 50hz, 4a, ac output 0 to 270 vac,class h or class f insulation

Central Government/Public Sector

CTN :45396558

16 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of hermetically sealed compressor,operating voltage 180-260 vac single phase, rated power consumption 475w output rated cooling capacity 926 kcal/h, thermally protected,application low temperature r-134a gas, electrical circuit cscr, confirming to is: 10617:2018, along with complete electrical accessories, as per sr.dee (chg)bct's drg no.raj/lhb/268.kce 444 hag. [ warranty period: 30 months after the date of delivery ] ]

CTN :45346840

11 Jun, 2026 NA

Pune - Maharashtra

Tender For supply of laser diode module 878 nm, 5 w as per specification , laser diode module 445 nm, 4 w as per specification , laser diode module 808 nm, 2 w

Electrical Circuit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Corporations And Associations And Others

Corporations And Associations And Others

Central Government/Public Sector