Tender For ca no. ge af no.1/gur-47/2025-26 repair and replacement of lt distribution network system, unserviceable lt ug cable, lt joint finding faults, lt equipment, control gear, lt panel connected items including load balancing of external electric supply
Tender For ca no. ge af no.1/gur-46/2025-26 repair and replacement of lt distribution network system, unserviceable lt ug cable, lt joint finding faults, lt equipment, control gear, lt panel connected items including load balancing of external electric supply
Tender For supply of 500 kva ,1500 rpm, 415v 0.80pf -lag dg with radiator and accessories on common base frame , 500 kva dg set - fuel day tank of 990 litres capacity with accessories and stand. , 500 kva dg set-24v dc, 360 ah ,minimum, lead acid type automotive battery with accessories and stand, to be supplied at the time of commissioning. , 500 kva dg set-float cum boost battery charger panel with stand for one dg , 500 kva dg set-necessary fuel piping, supports, accessories for one dg , 500 kva dg set-silencers, exhaust piping and stack, support structures support structure with foundation bolts and accessories, insulation and cladding and hardwares. height as per latest cpcb norms. , 500 kva dg set-acoustic enclosure for one dg with lighting fixtures. , 500 kva dg set-lt power, control, instrument and screened cable including all accessories like lugs, glands, ties etc. for one dg set. , 500 kva dg set-engine b-check kit for one dg, to be supplied at the time of commissioning. , 500 kva dg set-first fill of lube oil, coolant and coolant conditioner at site for one dg, to be supplied at the time of commissioning. , 500 kva dg set-tools and tackles specific to offered dg set. , 500 kva dg set-alternator terminal box with extension busbars , 500 kva dg set-amf panel for 500kva dg set , 500 kva dg set-mandatory spares for 500kva dg set and panels , 500 kva dg set- supervision of erection of one dg set with exhaust piping and structure, fuel piping, control panels and cabling , 500 kva dg set-supervision of testing, pre-commissioning checks, and commissioning and load trial of one dg set with control panels as per operating philosophy. , 750 kva ,1500 rpm, 415v 0.80pf -lag dg with radiator and accessories on common base frame , 750 kva dg set -fuel day tank of 990 liters capacity with accessories and stand. , 750 kva dg set -24v dc, 360 ah, minimum, lead acid type automotive battery with accessories and stand, to be supplied at the time of commissioning. , 750 kva dg set- float cum boost battery charger panel with stand for one dg , 750 kva dg set-necessary fuel piping, supports, accessories for one dg , 750 kva dg set-silencers, exhaust piping and stack, support structures support structure with foundation bolts and accessories, insulation and cladding and hardwares. height as per latest cpcb norms. , 750 kva dg setacoustic enclosure for one dg with lighting fixtures. , 750 kva dg set-lt power, control, instrument and screened cable including all accessories like lugs, glands, ties etc. for one dg set. , 750 kva dg set-engine b-check kit for one dg, to be supplied at the time of commissioning. , 750 kva dg set-first fill of lube oil, coolant and coolant conditioner at site for one dg, to be supplied at the time of commissioning. , 750 kva dg set-tools and tackles specific to offered dg set. , 750 kva dg set-alternator terminal box with extension busbars , 750 kva dg set-amf panel for 750kva dg set , 750 kva dg set-mandatory spares for 750kva dg set and panels , 750 kva dg set- supervision of erection of one dg set with exhaust piping and structure, fuel piping, control panels and cabling. , 750 kva dg set-supervision of testing, pre commissioning checks, and commissioning and load trial of one dg set with control panels as per operating philosophy. , freight
Tender For replacement of cable / lt transmission & control panel board at jnv devrala, bhiwanisubwork/packages:repair/maintenance of sub station building
Tender For bridge unloader - bridge unloader, 1. design, manufacturing and supply of heavy duty out door bridge for sugar mill plant cane unloading conforming to is:807-1976 & is:3177- 1977 fabricated from m.s. plate section conforming to is:226/2062 steel in box type design with and carriage fitted with wheel of fusion welded having l type bearing housing for long travel (lt) wheel assemblies having span-22.00 mtrs capacity -05ton swl along with dismantling of old existing bridge and erection and commissioning of new bridge old existing cross travel trolley will be used. type of bridge-m.s. plate fabricated box type span-22.00 mtrs, unloading capacity -05 ton swl2. techincal specification:-type of bridge -box type (m.s. plated fabricated), capacity-05 ton swl, unloading capacity -80 to 100 ton cane/hr, utility-sugar cane handling, height of top of top rail from ground-10.00 mtrs, height of lift-12.50 mtrs, wirerope19mm, 6/36 construction fibre wire, long travel speed -23-25 meter/minute, box side plate height-1250mm, box side plate thickness8mm, top & bottom plate thickness-top plate-12mm thick, bottom plate-10mm thick, top & bottom plate width-500mm, baff /stiffener plate spacing -750mm, baffle/stiffener plate thickness-8 mm., 3. end carriage:- length-5000mm, height-450mm, centre distance for end carriage wheel-4500mm,centre distance of trolley wheel as per previous trolly.4. long travel mechanism:- size of rail top at long travel- width-60mm, height-25mm, size of rail section at cross travel-width-60mm, hight25mm.5. electric motors for long travel drive 5.3hpx960 rpm rating s4 duty, qty-02 nos.6. gear box for long travel:- type helical,model-hb-350, ratio-40:1, service factor-greater than 2 on installed power, qty-02 no7. coupling for long travel drive:- type geared type half gear model1038. breaks:- thruster-electro hydraulic thruster 18 kg/cm , dia-6", qty 02 no., floating shaft dia/length-70mm/800mm-1000mm9. wheel:- dia meter-420mm, bearing-22218 skf/fag make, housing l type, qty-04 nos, note:- (i)fabrication will be done using prime plates and sections and using mig, welding process. (ii)only tack welding will be done by electrode using arc welding(iii) parallelist of the cross travel rails/square bar, diagonals, deflection of the bridge & trolley will be accurate and confirming to standard and best engineering practices. (iv) bridge must be two coated by red oxide metal primer and two coats of golden yellow colour.11. electric panel for new bridge, resistance boxes for bridge motors, control cabin,12. electric wires, main switch push button control & cable trolleys for complete13. unloader.14. dismantling of old trolly and all its accessories and erection & commission of new trolly, frame and fitting of all old spares ie. rope, drum, thruster break etc complete testing and trail., scope of work1. supply of above mentioned bridge on for basis to mill site.2. dismantling of old unloader. 3.erection of new unloader bridge with old trolley & grab with complete electric work with new electricalpanel for bridge and all electricalpanel for trolley & grab. all wiring should be new & standard isi make
Tender For annual maintenance contract for high tension electrical equipment (electrical substation-3 nos included ht and lt panel switches, breakers, command and control system, communication network) installed at gc, crpf greater noida (for one year)
Tender For corrigendum : supply of 3 x 2000 kva emergency dg set and accessories for lara stpp stage ii 2x800mw chhattisgarh - 2000 kvae 1500 rpm, 415v, 0.80 pf -lag-, prime power dg set with radiator on common base frame , fuel day tank of 990 litres capacity with accessories , 24v dc, 360 ah, minimum, lead acid automotive type battery , 24 v dc float cum boost battery charger , necessary fuel piping from day tank to engine , exhaust piping, with insulation and aluminium cladding upto 30 meters height with supports , galvanised pre-fabricated support structure for exhaust piping, common for two dg , galvanised prefabricated support structure for exhaust piping- for one dg , acoustic enclosure for one dg with ventilation fans, exhaust fans, if applicable, and lighting fixtures. , lt power, control and instrument cable including all accessories like lugs, glands, ties etc , b-check kit to be supplied at the time of commissioning , first fill of lube oil, coolant and coolant conditioner to be supplied at the time of commissioning , tools and tackles for offered dg set , alternator phase side and neutral side terminal box with ct , mandatory spares for dg sets and panel , amf panel , supervision of erection for one dg set , supervision of testing, commissioning and load trial of one dg set , total freight charges for all supplies including spares
Tender For manufacturing, fabricating, supply and installation of lt control panel for operation of delivery side 900 mm dia. bfv against pump no.1 and 2 at rwps-iii, grww.