Latest electricity board scrap Tenders | Government electricity board scrap Tenders

State Government

CTN :45519061

20 Jun, 2026 9.34 Lacs

Panisagar - Tripura

Tender For mtc.of rws/pdf/15 fc/other panchayat/deposit fund schemes in north tripura 26-27/sh-providing, fixing in/c repair of electrical panel board comprising with starter main switch, motor protection device of panisagar block of dws sub-division, panisagar

State Government

CTN :45520196

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33kv rewan bay with supply of material, integration and remote gateway work at 220kv ss bangra under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45520197

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33 kv birdha bay with supply of material, integration and remote gateway work at 220kv ss birdha under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45509142

20 Jun, 2026 3.35 Lacs

Malappuram - Kerala

Tender For replacement of damaged aug cable for main motor and panel board at iet campus

corporations/Associations/Others

CTN :45513067

22 Jun, 2026 NA

Nashik - Maharashtra

Tender For mpcb , contactor , mcb , power supply , relay with base , 8 way relay board , power supply , voltage transducer , current transducer , fuse 100a , fuse 500a , proximity sensor , ceramic heater , 3phase circuit breaker , inverter , module, cube 67 , cylindrical hrc fuse , line monitoring relay , auxiliary contactor , thermal overload relay , hrc fuse 200a , hrc fuse 400a , plc power module , plc cpu module , analog inpur output module , plc dc input module , temperature controller , reed switch , contactor and auxiliar contactor , safety relay , glass fuse , hmi panel with plc , analog input output module , digital input output module , ceramic connector , vaccum sensor head , vaccum sensor amplifier , heater 100 band , temperature sensor , fiber sensor amp , switch with roller lever , relay , main switch with handle , ceramic fuse with fuse holder , current control relay , plc , timer , roller micro switch with lever , ceramic fuse , air pressure sensor , elcb , fuse , inverter speed controller , plug in base , ethernet switch mpcb moeller type pkzmo-4 2.5a-4.0a in=4a, electromagnetic contactor moeller type dilm 12-10 , mcb moeller current rating 16a 3-pole, mpcb moeller type pkzmo-16 10-16a, electromagnetic contactor moeller type diler-40-g , power supply weidmuller i/p-230vac,2a o/p-24vdc,5a, relay with base weidmuller type rcl 425024 24vdc contact 8a, 8-way relay board omron type g2rl-1 coil- 24vdc 12a,250vac, power supply shavison type pl2425 i/p voltage 230vac o/p-24 vdc,2.5a, power supply shavison type -g31-120-24 i/p voltage 230vac o/p-24 vdc,5a, mcb siemens 6a 2-pole, voltage transducer rish rish con cv 63-500v, current transducer rish * /bid number : gem/2026/b/7631412 + /dated: 11-06-2026 ' ' / bid document 1 / 68

CTN :44993428

15 Jun, 2026 7.15 Lacs

Rampur-Up - Uttar Pradesh

Tender For bid to ras supply of fabrication and construction of copper plate earthing details of electrodes and earth pit at akashvani rampur, uttar pradesh , interconnecting earth electrodes with providing, fabrication and fixing of 50mmx3mm copper strip at akashvani rampur, uttar pradesh , copper strip laying for extension of earthing system up to the xtr hall, ups and lt panel and terminating in bus bar by digging the soil and placing the copper strip along the trenches at air rampur , providing of 375x38x6mm copper bus bar with insulators and steel nut bolts and the fixing of 375x38x6mm copper bus bar is to be done to terminate the different earthing system at akashvani rampur. , providing and fixing of nomenclature sign marker for earth pits at akashvani rampur, uttar pradesh , digging of trenches of size 450mmx600mm total length 118mtr for 185 sq mm 3.5core and starting from electricity board energy meter to lt panel inside room and to respectively by digging the path , providing and grouting of 2 nos. of 3inch dia g.i pipes of different length on the cement concrete flooring and along the vertical walls. total length of both pipes is 27 mtr. , providing, grouting and fixing 2 nos. of 4inch dia g.i pipes along the ms stand of main mccb at energy meter. total length of both pipes is 14 mtr. , unwinding roll of 185 sq mm 3.5core al. cable from the cable drum and laying 2 length of this power cable through the trenches and through the gi pipes as laid down at akashvani rampur , reconstructing the cc flooring and repairing the area with cement concrete and stone aggregate mixer and finishing the surface, complete in all respect at akashvani rampur , providing and fixing of lt cable route marker made up of 2.5inch dia signage with 10mm x 2ft long ms rod at akashvani rampur, uttar pradesh fabrication and construction of copper plate earthing details ) /bid number : gem/2026/b/7445375 * /dated: 24-04-2026 & & / bid document 1 / 22

CTN :45538750

18 Jun, 2026 NA

Shimla - Himachal Pradesh

Tender For a/r & m/o lwss challahal dishti, under jsv section mandri sub-division sunni, tehsil sunni, district shimla hp (sh: deployed of manpower for operation of pumping machinery i/c watch & ward, minor repair of schemes such as providing and fixing of various dia fitting i.e. g.1 socket, union, tee brass full way wheel valve etc. one coat of white washing snow cem in all civil structure, cleaning of storage tanks, brush cutting & removal of slips around the civil structure, welding of rsing main of all schemes, repair of panel board, starter main switch in this estimate complete with all respect to entire- satisfaction of engineer-in-charge.)

corporations/Associations/Others

CTN :45513136

22 Jun, 2026 NA

Luckwada - Chhattisgarh

Tender For supply of 1600036184 lt vfd comp , 1600115023 filter module , 1700005336 h r c fuse base 100 , 1600055590 mc interface board , 1700003328 spare kit main interface , 1700001884 control unit drive , 1600237144 control card rmio asxr7360 , 1700004309 module interface board , 1700001873 control panel , 1600481068 mpcb , 1600115003 rdcu card , 1600115007 field bus kit , 1600115016 charging resistor , 1600237129 isu on off swtch , 1600115014 communication module , 1600115005 charging control board , 1600194935 pulse encoder interface , 1600115024 pcb kit , 1600682256 key actuator , 1700001983 fan ws , 1600115009 pcb kit , 1600036173 lt vfd , 1600115017 long life fan , 1600237135 long life fan centrifugal d2d160 , 1700002180 fuse semiconductor , 1700011088 semiconductor fuse , 1700011089 semiconductor fuse , 1700011091 semiconductor fuse 1250a , 1700011092 semiconductor fuse 1100v , 1700011093 semiconductor fuse 170m , 1700011094 semiconductor fuse 20 a , 1700011095 screw fuse , 1600237145 drive module , 1700001497 capacitor 250vac

Central Government/Public Sector

CTN :45492541

30 Jun, 2026 3.16 Crore

Budgam - Jammu And Kashmir

Tender For tender for supply of fids and 05 years camc at srinagar airport : - supply of 3 x 2 mtrs. or higher true colour led display board with stainless steel floor ceiling wall mounting arrangement. , supply of 65 inch led display with floorceiling wall mounts as per the specifications , supply of 55 inch led display with floor ceiling wall mounts as per the specifications , supply of 43 inch led display with floor ceiling wall mounts as per the specifications , supply of fids servers to work as main and standby set of two servers with accessories as per the tender specifications. , supply of data entry terminal client desktop pc with all accessories as per the tender specifications. , supply of ntp server with accessories as per tender specifications. , supply of licensed operating system server level with support for all servers , supply of operating system at client level pc work station etc. with support for all clients , supply of licensed antivirus server level with support for all servers , supply of licensed antivirus client level with support for all servers , supply of layer 3 network switch as per technical specifications and accessories with rack , patch panel , liu and other accessories , supply of layer 2 network switch as per technical specifications and accessories with rack , patch panel , liu and other accessories , supply of 12v 84ah battery for the 2x 20kva ups of make numeric hp max. the cost of old batteries connected to ups shall be considerd while qouting and shall be handed over to contractor as buy back. , supply of fids package software as per requirement of the tender , supply of 8 port kvm switch. , supply and laying of 25 mm dia , 16 swg isi marked pvc conduit with accessories as required , supply and laying of 3 core 6 sq mm multi strand copper conductor pvc insulated pvc sheathed armoured power cable on wall surface tray with accessories as required , supply and laying of 3 core 1.5 sq mm multistrand copper conductor pvc insulated pvc sheathed unarmoured power cable in existing conduit tray with accessories as required , supply and laying of 6 core smf ofc unarmoured cable on wall surface tray with accessories as required , supply and laying of utp cat 6 cable in existing conduit tray with accessories including termination with wall surface mount box as required , supply of power distribution panel complete as per specifications for flds system. , excavation soft digging back filling as per site requirement , supply of rj45 io face plate gang boxback box with standard length of patch cable for fid system as per site requirement and specifications , training and documentation as per tender , charges for installation testing and commissioning of the complete system including integration of existing 24 nos , cids with new fids system.

CTN :45484463

19 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of amps make havells l and t standard isi equivalent , pvc tape 19mm wide 5 m long make steelgrip anchor kinjal isi equivalent , cable pvc insulated electric cables heavy duty 1100 volts grade multi standard copper conductor of size 1.5 sqmm single core frls confirming to is 1554 , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 4 sqmm single core frls confirming to is 1554 part 1 1988 , pvc casing capping of size 3 oblique 4 medium grade snow white make anchor ssk cona , switch piano 5 amp 230 volts flush type one way snow white make anchor ssk cona isi equivalent , led tube light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete make havells bajaj philips cromption isi equivalent , screw full thread 6 x 19 mm isi marked 200 nos pkt , pvc switch board snow white size 7 inch x 4 inch for sockets and switches db make supreme polycab finolex isi equivalent , pvc switch board snow white size 8 inch x 10 inch for main switches db make supreme polycab finolex isi equivalent , pvc l bend and t junction joint for pvc casing and capping confirming to is 3419 part 3 make supreme polycab finolex isi equivalent , switch socket combination snow white multipurpose 2 in 1 15 amp 230 volts make anchor ssk cona isi equivalent , service bracket 40mm dia gi tubing medium grade 1.5 mtr long make jindal tata kalinga isi equivalent , cement 43 grade opc packed in hdpe bag each 50 kg wt conforming to is 8112 1989 birla gold ambuja ultratech isi equivalent , coarse sand free from vegatative materials , coarse aggregate 20mm graded , coarse aggregate 40mm graded , hardcore 63 to 90mm , mild steel framed work such as truss rafter purlins and ms plate make tata sail jsw isi equivalent , mild steel bars of size 6 to 8mm dia conforming to is 432 part i 1982 make tata sail jsw isi equivalent , mild steel bars of size 10mm and above dia conforming to is 432 part i 1982 make tata sail jsw isi equivalent , the pre painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.50 mm thick an colour having a tensile strength 550mpa of size 10 feet x 3 feet , the pre painted galvalume aluminium zinc coating gi based plain steel 0.50 mm thick an colour having a tensile strength 550mpa. , mild steel self drilling screw with washer size 3 inch isi marked 100 nos per pkt , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger asian nerolac isi equivalent , synthetic paint enamelled black confirming to is 5 2004 make berger asian nerolac isi equivalent , painting brush 3 inch isi marked , ms nut and bolt of length 100 mm fully thread , ms nut and bolt of length 0.45 m 12 mm dia nuts and washers for fdn bolt , iron welding rod confirming to is 814 2002 isi marked 3.15mm thick 100 nos per pkt , ms binding wire panel radiator: supply of wall mounted steel panel radiators of heat output of 3200 kcal/hr,colour), baked in high gloss finish with and including all necessary fittings as per ne 442 standards , m.s made radiator has both core and tank made of mild steel. the radiator supplied should transfer heat from the fluid inside to the aire outside. the radiator will have thermostat control sensor to control the room temparature, make: eurotherm/maktek/bharat works/isi equivalent., boiler: supply of vertical fire tube boilers (heat output of 50000 kcal/hr) (58.02 kw/hr) with stainless steel dampers. the boiler will run on hsd/kerosene and will be rated as per the heat load calculation. the presure rating should be upto 160 pai. now //bid details 2 / 35

Electricity Board Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector