Latest electromagnetic flow meter Tenders | Government electromagnetic flow meter Tenders

Corporations And Associations And Others

CTN :45488872

06 Jul, 2026 NA

Jalandhar - Punjab

Tender For corrigendum : supply of chain and chain spares - csm bhogpur, bagasse elevator chain & its spares, chain with case hardened, m.s roller, bush and pins for baggase elevator chain having attachment link at every 4th link., pitch 150 mm, side link as per drg. no.ce/mh/504 with test certificate from approved lab, bush as per drg no. ce/mh/504, roller as per drg no. ce/mh/504, pin as per drg.no ce/mh/504, outer link pin cut type as per drg.no. ce/mh/504, outer link pin size hole as per drg.no. ce/mh/504, inner link bush type (both sides) as per drg.no. ce/mh/504, side attachment link as per drg.no. ce/mh/504, cane carrier chain & its spares, cane carrier chain pitch -150mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no.mh pcc r1, pin as per drawing no. . mh pcc r1, bush as per drawing no. . mh pcc r1, roller as per drawing no. . mh pcc r1, outer link r.h as per drawing no. mh pcc r1, outer link l.h as per drawing no. mh pcc r1, inner link r.h & l.h as per drawing no. mh pcc r1, cane carrier slates as per drg no. mh-517, inter-rack carrier chain& its spares, inter rack carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, secondary carrier chain & its spares, secondary carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, csm nawanshahr, supply of secondary carrier chain spares as per drg. no. 183 r3material of side link en 45pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5 hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 60 ton, supply of cane carrier chain and spares as per drg. no. 216 r3material of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 40 ton, side link (fig no. 1), side link (fig no. 2), side link (fig. no. 3), roller (fig no. 4), pin (fig no. 5), bush (fig no. 6), slats (fig no. m- 316r), supply of rbc chains as per drg. no. m- 263rmaterial of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller - is 226-1975hardness = pin 50 + 5 hrc bush 40 + 5 hrc roller 30 + 5 hrcbreaking load = 60 tonsupply of spares for r.b.c. chain as per drg. no. m-263 r1, side link for bush (fig no. 1), side link (round hole) ( fig no. 2), side link (one side cut hole) (fig no. 3), side link for attachment ( fig no. 3 a), attachment no. m 111r2, roller (fig no. 4), bush (fig no. 5), pin (fig no. 6), rake (grill type) as per drg. m-111r3, pin for rake as per drg m-111r4, supply of forged link chain 229 mm pitch as per drg. no. m-305specification:material of forged block - en 30 bmaterial of pin & bush - 16ni3cr2pin hardness - 50 5hrcbush hardness - 40 5hrcbreaking load - 70 ton, csm batala, pin for rbc as per drawing no. bcsm/mh/01, bush for rbc as per drawing no. bcsm/mh/01, roller for rbc as per drawing no. bcsm/mh/01, pin for mbc as per drawing no. bcsm/mh/01, bush for mbc as per drawing no. bcsm/mh/01, roller for mbc as per drawing no. bcsm/mh/01, pin for elevator as per drawing no. bcsm/mh/01, bush for elevator as per drawing no. bcsm/mh/01, roller for elevator as per drawing no. bcsm/mh/01, pin for cane carrier as per drawing no. bcsm/mh/01, bush for cane carrier as per drawing no. bcsm/mh/01, roller for cane carrie

CTN :45718847

16 Jul, 2026 11.44 Lacs

Jaipur - Rajasthan

Tender For supply of glass wares, polythene wares and miscellaneous items at ssctpp, suratgarh- bottle polythene (pp) wide mouth with cap , burette , burette clamp mild steel chrome pla type with boss head, single pkt (ea , center to (300mmx). , pipette bulbs , pipette stand horizontal (12 pip , retort stand , side hole (225mmx , side hole (300mmx , silicone pipette bulbs , volumetric flask , (ii)beaker polythene capacity 1000 ml,pp autoclaveable , (iii) beaker polythene capacity 250ml,pp autoclaveable , (iii)beaker polythene capacity 500 ml,pp autoclaveable , , , beaker polythene pp auto clavable , blow in low density polythene 125 ml , blow in low density polythene 60 ml , chloroform bladder 500 ml , dropper sterile capacity 3ml , dropping bottle , latex bladder enkay no,5 with clip , measuring cylinder , wash bottle ldpe plastic , , , circular capsules fused silica without lid 48 x 15 (20 ml) , dishes culture petri , crucible fused silica for vm + lid 25x22x38 mm , beaker grifin, low form, with spout, graduated , burette - boroflo, screw thread with ptfe key , funnel plain 60° angle long stem glass 100 mm diameter , funnel separating pear shape with hollow plug stop cock, hollow interchangeable stopper, 500ml , measuring cylinder-single matric scale with pour out , pipette measuring (mohr type) accuracy as per class -a , volumetric flask with stopper , 50 ml burette with 1 ltr. reservoir , automatic zero burette accuracy as per class a with certificate , bod bottles with i/c stopper (300 ml) , bottles reagent amber with i/c stopper , bottles reagent plain narrow mouth with flat head i/c stopper , conical flask , flask boiling round bottom , gas burette with jacket cap. 100 ml (graduated burette 0-5 ml least count 0.1 ml for orset appratus) , orsat gas analyser (for analysis of flue gases) for determination of co2 o2 and estimation of co in flue gases complete with rubber tubing connector. 50 ml burrete and other accessories equipment shall be complete polished wooden cabinet equipment should be made of heavy walled borosilicate glass tube and stop cock , spares parts for orsat apparatus , tissue paper roll (double ply) (whatman) filter paper, circular catno. , cellulose nitrate filter 0,45 micron , , acid proof suit , , coal sample tray 12"x 14" big , , spatula (one end spoon and one end flat) 200 mm , , safety goggles (plain) , , direct reading % thermometer for caustic soda lye (45% to 50%) w/w with temperature correction , bottle relative density with capillary bore interchangeable tefflon stopper, 25ml , chlorine gas toner spanner , direct reading % thermometer for hydrochloric acid (27% to 32%) w/w with temperature correction , direct reading % thermometer for sulphuric acid (95% to 99%) w/w with temperature correction , heating element for muffle furnace (1200 degree c , kanthal a-1 resisative wire) , lab apron coat, free size , relay for muffle furnance , spare parts for muffle furnace (make jd refractories) m degree , test sieve for coal analysis, brass frame s.s./wire mesh (make-jayant) , test sieve sets for coal mill fines will be brass, 200mm dia 50mm height, wire cloth from one piece without seam (set shall be consist of three sieve lid & receiver) 50, 100 and 200 astm mesh (make-jayant) , thermal fuse , thermocouple cr/al for muffle furnace , water bath rectangular (double wall), ambient to temp. 95°c, +/-1°c, 220/230v ac, 12 holes 75mm dia (size 425*325*100mm) , water safety jacket(medium size) , temperature controller (pid with sgr power controller) , , working chamber of muffle furnance 6x6x12 inch , , laboratory hand gloves , , laboratory hand gloves (rubber acid and alkali proof) medium size , , laboratory hand gloves nitrile , , polythene sampling bags , , polythene sampling bags (size-1 kg) with zip , , polythene sampling bags (size-500 gm) with zip , , polythene sampling bags (size-250 gm) with zip , , crucible tong , , crucible tong 12" inch , , crucible tong 24" inch , , gooch crucible g4 (size-30 ml) , , vm

CTN :45448409

03 Jul, 2026 NA

Nalanda - Bihar

Tender For corrigendum : supply of electromagnetic flow meter s/n-a2009054 , electromagnetic flow meter s/n-a1006763 , variable area flow meter , electromagnetic flow meter s/n- a1006735 , electromagnetic flow meter s/n- a20009091 , vortex flow meter , electronic module

CTN :45699353

06 Jul, 2026 57.22 Lacs

Panchkula - Haryana

Tender For supply, installation, testing and commissioning of clamp-on type ultrasonic flowmeter, online continuous effluent monitoring system, programmable iot panel gsm/gprs, electromagnetic flow meter, open channel ultrasonic flowmeter and all accessories co

CTN :45689246

16 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of repair and overhauling service - repair/ refurbishment, upgradation and installation of alternative pump testing facility; as per scope of work; no; buyer premises repair of 03 nos. electromagnetic flow meter, lining hard rubber, fluid fresh water, size dn 200. flow up to 350 m3/hr.

Central Government/Public Sector

CTN :45694653

06 Jul, 2026 NA

Raigad - Maharashtra

Tender For transmitter for electromagnetic flow meter

corporations/Associations/Others

CTN :45693858

10 Jul, 2026 40.33 Lacs

Satara - Maharashtra

Tender For satara industrial area annual maintenance calibration of miflow electromagnetic flow meters installed on rwrm at jackwells satara karad wai and patan i a wss and pec mibel gsm and online data system scada at jackwells satara karad wai

CTN :45509948

01 Jul, 2026 70.00 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : supply of electro-mechanical & instrumentation items for mass balancing reservoir (mbr- supply of pump starter panel including individual vfd for 125 kw (02w+1s), supply of 1.1 kv grade cable- aluminium conductor supply, laying, testing & commissioning 1.1 kv grade, xlpe insulated, stranded aluminium conductor cables, a) 3.5 c x 185 sq.mm, b) 3.5 c x 300 sq.mm, 1.1 kv grade, xlpe insulated, stranded copper conductor, galvanised steel flat strip / round wire armoured, extruded pvc type st2 sheathed, heavy duty cable, a) 3 c x 2.5 sq.mm, supply of gi perforated type cable trays with returned edge / flange, fabricated from 2.0 mm thick sheet steel in the standard length of 2.5 mtrs, duly hot dipped galvanized after fabrication as per is 2629-1989 / is 4759-1984 including accessories such as coupler plates/ fish plates, bends, tees, reducers, elbows, covers and electro-galvanized hardware etc, erected on existing support as per specification, a) 450(w) x 75(h) x 2.0 mm thick, b) 300(w) x 35(h) x 2.0 mm thick, c) 100(w) x 35(h) x 2.0 mm thick, mechanical items, supply of di pipes k-9, dia 500mm, di fittings 500mm, , , , , , for 300 mm dia butterfly valve, for 500 mm dia butterfly valve, for 600 mm dia butterfly valve, instrumentation items, non-return valve 300 mm dia, , , , supply 10cx 1.5 sq.mm signal cable, supply 1px 1.5 sq.mm signal cable, supply 2cx 1.5 sq.mm signal cable, supply horizontal end suction pump 780m3/hr @40m head, impeller: ss, shaft: ss, casing: ci including pumps with mechanical seal. 120 kw 2w+ 1s, supply of 1/2" pressure gauge 0-10 bar,, supply of butterfly valve, supply of electric actuator, supply of electromagnetic flow meter 500 mm dia, supply of expansion bellow, supply of pressure transmitter, 0-7 kg/cm2,, supply of zero velocity valve 500mm dia

CTN :45664438

04 Aug, 2026 NA

Delhi - Delhi

Tender For procurement of spares for mi-17iv helicopter - valve, air, hydraulic pump, bombing panel, rh junction box, dc junction box, tester, rewinding machine, tester for erd-3vm, low frequency signal generator, frequency meter with unit yazch-441, power supply unit, frequency generator 0.100hz, distance test set, tester for pnp-72, lab standard signal generator, dummy antenna, duel temperature indicator, ramp hydraulic cylinder, interrogetor, main wheel half axle, reveiver driver or exciter( r-863), trimble 2101 1/o approach plus, solenoid operated valve, unit 1-9 (if amplifier), cable loom with shock mounting rack

Central Government/Public Sector

CTN :45638025

02 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply, installation including all fitment accessories and commissioning of an electromagnetic flow meter todifferent line sizes, dn 50mm qty-03 nos, dn 80 mm qty-01 no, dn 150 mm qty-01 no with following specification, liner ptfe, electrode-ss316, input-230 v ac / 24 v dc, output-rs485, 4-20 ma with calibration certificates for the flow meters from nabl/govt approved agencies. make zeven or similar. [ warranty period: 12 months after the date of delivery ] ]

Electromagnetic Flow Meter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector