Latest end plate Tenders | Government end plate Tenders

Central Government/Public Sector

CTN :42135479

07 Oct, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of spares for side arm charger chp stage ii ntpc tanda - thrust plate,sac-dc-pn16-4,280,l&t,sac, fwrd hsg,sac-dc-pn16-6,203x110,l&t,sac, rear hsg plate,sac-dc-pn16-7,390,l&t,sac, spacer tube,sac-dc-pn16-8,150,l&t,sac, link plate,sac-dc-pn21-1,1875lg,l&t,sac, thrust washer,sac-dc-pn21-20,330,l&t,sac, latch pin,sac-dc-pn21-34,l&t,sac, thrust washer,sac-dc-pn21-48,180,l&t,sac, upr brg ret plate,sac-dc-pn12-5,310,l&t, lwr brg ret plate,sac-dc-pn12-6,350,l&t, end plate,sac-dc-pn12-7,210,l&t,sac

CTN :42142254

18 Oct, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of 10 inch round plastic dinner plate white , 200 ml plastic veg bowls white , 19 cm fine mess stainless steel chhani for atta , suji and others flours , 34 cm large stainless steel cooking spoon , stainless steel large serving spoon , stainless steel large palta , aluminium patila with lid 20 ltrs , 20 ltrs stainless steel patila with lid , cast iron kadai without lid , electric heavy duty meat cutter, chopper and mincer with stainless steel blade

CTN :42134207

13 Oct, 2025 NA

Budgam - Jammu And Kashmir

Tender For supply of ingfare six mm , pipe , pati six mm , nut and bolt , nut and bolt with washer , nut and bolt lock and pin , hinges , wheel , iron sheet four mm , iron role pipe , denting painting , lock system , lock hook system , welding rod and iron cutter plate

CTN :42006668

10 Oct, 2025 8.00 Lacs

Chhatarpur - Madhya Pradesh

Tender For purchase of hand pump material rajnagar distt. chhatarpur (m.p.) - hand pump wadi complete with head,watcher tank,pedestal mark, head complete with handle,chain mark, head wax without handle mark, front cover mark, front cover nut mark, handle empty mark, handle complete with chain,bearing axle mark, chain with coupling mark, chain nutbolt mark, axle mark, axle baser mark, bearing skf 6204 no. mark, third plate mark, nutbolt mark, water tank water chamber mark, pedestal full size mark, pedestal double plate 01 ft mark, pedestal double plate 02 ft mark, g.i. pipe 1.25 inch 10 ft mark, g.i. socket 1.25 inch mark, connecting rod 10 ft mark, rod socket mark, pilenler rod mark, cylinder complete with lower, upper valve, pilenler rod mark, empty cylinder valve mark, reducer cap mark, reducer cap basser mark, basser line slip jjndpp mark upper valve jjndpp mark upper valve guide pipit valve jjndpp mark lower valve jjndpp mark lower valve bass jjndpp mark rubber bass bucket bass jjndpp mark walk no. 02 of heera company jjndpp mark spanner key 17x18 taparia a spanner key 19x20 taparia a pipe wrench taparia/jhalani heavy duty 12 inch pipe wrench taparia/jhalani heavy duty 14 inch pipe wrench taparia/jhalani heavy duty 18 inch pipe wrench taparia/jhalani heavy duty 24 inch pipe wrench taparia/jhalani heavy duty 36 inch hammer joint papp marke glander cutter m sene bach company's hemmering drill m sene papp marke glander cutter blade iron earring papp marke chain pulley 3 ton papp marke chain pulley 5 ton papp marke welding m sene rod 10 no. papp marke hilti m sene bit bit papp marke welding machine portable 250 weight single face hilti machine 35 kg

CTN :41844490

06 Oct, 2025 20.00 Lacs

Ujjain - Madhya Pradesh

Tender For supply of tools & equipement of various trades for government iti of ujjain zone - measuring steel tape (5 meters), combination plier insulated (length- 200 mm (8 inch)), screwdriver insulated (size: 150 mm x 4mm), screwdriver insulated (size: 150mm x 6 mm), electrician screwdriver thin stem insulated handle (4mm x 100 mm), heavy duty screwdriver insulated (5mm x 200 mm), punch centre (overall length: 150 mm; tip diameter: 9 mm), knife double bladed electrician (size: 100 mm), neon tester, steel rule graduated both in metric and english unit (overall length: 300 mm), hammer, cross peen with handle (weight: 250 grams), hammer, ball peen with handle (weight: 500 grams), chisel firmer with wooden handle (overall length: 200 mm, blade width: 6 mm), allen key alloy steel, bearing puller (inside and outside) jaw open type, scissors blade, ss, scissors blade, ss (blade length: 150 mm), wire cutter and stripper (overall length: 150 mm), hacksaw frame, adjustable frame (300 mm), try square, blade length: 150 mm, pliers long nose insulated, overall length: 150 mm, pliers flat nose insulated, overall length: 200 mm, pliers round nose insulated, overall length: 100 mm, d.e. metric spanner double ended, gauge, wire imperial stainless steel marked in swg & mm(swg 0 36 and metric equivalents (0.30 mm to 8.23 mm)), file flat 250mm smooth, oil can pressure feed system, capacity: 250 ml, hydrometer, portable electric drill machine with impact driver, out side micrometer (measuring range: 0 25 mm), rheostat (sliding type)(rheostat - 0-25 ohm, 2amp), safety helmet, safety belt, digital multi meter, a.c. voltmeter m.i. analog, portable box type housed in wooden case, ammeter mc analog, portable box type housed in wooden case, ac ammeter mi, analog, portable box type housed in wooden case, kilo wattmeter analog, portable box type housed in wooden case, a.c. energy meter, power factor meter (digital 440v, 20a, 3phase, portable), frequency meter (45 to 55hz), tong tester / clamp meter (0-100a digital type), megger (analog - 500 v), single phase transformer, core type, air cooled 1 kva, phase sequence indicator 3 phase, 415 v, soldering iron (25-wattt), soldering iron (65-watt), soldering iron (120 watt), electric iron, a.c. ceiling fan, motor pump set (1 hp, 1 phase, 240v), ceiling fan coil winding machine, fire extinguisher co2, steel rule with metric & british graduation (length: -150mm), caliper hermaphrodite spring type (length: 150 mm), scriber (length: 150 mm), screw driver (overall length-10mmx150mm), chisel (cold flat 20 mm x 150 mm), hammer (ball pein 0.25 kg with teak wood handle), file -flat (second cut 250 mm), file half round second cut (length: 150 mm), safety goggles (for chipping &grinding), dot punch (dimensions:10mmx100 mm), combination set (300 mm), micrometer (outside 0 - 25 mm lc 0.01 mm), universal vernier caliper-range, vernier height gauge (300 mm graduated in metric lc 0.02 mm nabl accredited lab certificate), surface plate c.i with stand and cover, marking table (mild steel), universal angle plate (150mm x 150 mm), punch number set., drill bit (hss twist 3 to 12 mm by 0.5 mm straight shank), taps and dies complete set-in box (5, 6-, 8-, 10-, & 12-mm set of 5 metric), file (knife edge smooth 150 mm), file (triangular smooth 200 mm), file (square second cut 300 mm), file (triangular second cut 200 mm), file flat second cut safe edge. overall length: 300, file (flat bastard 200 mm), file (flat bastard 250 mm), file (half round second cut 250 mm), file (half round bastard 250 mm), file (round bastard 250 mm), file (hand second cut 150 mm), file card 3" x 5" size brass or steel wire), combination plier insulated ( length- 150 mm), spanner set (tubular box 6-32 mm set of 12 with tommy bar), scraper (flat 150 mm), scraper (triangular 150 mm), chisel (cold flat 10 mm x 100 mm), chisel (cold round nose 9 mm x 100 mm), drill chuck (morse taper 0 - 12 mm), pipe wrench (400mm), pipe vice (cast iron with hardened jaw

CTN :42021067

09 Oct, 2025 NA

Umaria - Madhya Pradesh

Tender For item supply for forestry item - white paint (asian, berger, nerolac brand)_(premium quality), green paint (asian, berger, nerolac brand)_(premium quality), aluminum paint (asian, berger, nerolac brand)_(premium quality), black japan paint_(premium quality), measuring tape 2 metre_(freemans brand), measuring tape 5 metre_(freemans brand), measuring tape 10 metre_(freemans brand), measuring tape 30 metre_(freemans brand), paint brush small (2" inch)_(premium quality), paint brush big (4" inch)_(premium quality), paint brush big (6" inch)_(premium quality), oil chalk_(premium quality), writing brush (plate no.-1)_(premium quality), writing brush (plate no.-2)_(premium quality), tupentine oil_(premium quality), coal tar_(premium quality), joga rassa_(premium quality), nylon rope_(premium quality), zed pen nipul_(premium quality), cross cut saw_(premium quality), chapras_(premium quality), kanasi_(premium quality), marker pen_(premium quality), power chain saw machine_(petrol with 16 inch bar and chain ), cement ppc grade 53 (birla, acc, utratech)_(premium quality cement. the compresive strength must be 53 mpa after 28 days of curing. weight of bag is 50 kg. ), cement opc grade 43 (birla, acc, utratech)_(premium quality cement. the compresive strength must be 43 mpa after 28 days of curing. weight of bag is 50 kg.), sand (river) _(sand must be free from silt and other organic impurities. ), sand (balu) _(sand must be free from silt, stones and other organic impurities.), murrum (red)_(well graded, free from vegetation), coarse aggregate 10 mm _(cubical and angular shape without dust and organic matters), coarse aggregate 20 mm _(cubical and angular shape without dust and organic matters), coarse aggregate 40 mm _(cubical and angular shape without dust and organic matters), boulder stone (60-100 mm)_(round shape ), stone dust_(without soil and stone ), tmt bar 6 mm_(isi mark thermo mechanically treated bars), tmt bar 8 mm_(isi mark thermo mechanically treated bars), tmt bar 10 mm_(isi mark thermo mechanically treated bars), tmt bar 12 mm_(isi mark thermo mechanically treated bars), binding wire _(corrosion resistance, galvanized iron coating ), brick (fly ash) _(modular size 190x90x90 mm), brick (open bhatta)_(well brunt 9x4x3 inch size, uniform copper-red color and free from cracks, flaws), brick (chimney)_(well brunt 9x4x3 inch size, uniform copper-red color and free from cracks, flaws), kota stone_(25 mm thick), granite stone (kitchen)_(premium quality), vitrified tiles 2x2 feet_(glossy double charge), vitrified tiles 2x2 feet_(glossy double charge), vitrified tiles 2x4 feet_(glossy double charge), vitrified tiles 4x4 feet_(glossy double charge), bathroom tiles 12x12 inch _(premium quality ceremic tiles), wall tiles 18x12 inch_(premium quality ceremic tiles), border tiles 8x3 inch_(premium quality ceremic tiles), paver block_(dumble shape 200x160x80mm premium quality), paver block_(hexagon shape premium quality), wood primer_(premium quality), wood paint_(premium quality), wooden door frame 7.0" x 3.6"_(good quality timber), wooden door frame 7.0" x 2.9"_(good quality timber), window frame 5.0" x 4.6"_(good quality timber), window frame 4.0" x 4.6"_(good quality timber), window frame 3.0" x 4.6"_(good quality timber), ventilation frame 2.0" x 1.6"_(good quality timber), wpc door & window frame _(premium quality), iron door with making & fitting charge_(premium quality), aluminium door_(premium quality), panel door_(premium quality), doors & window panel prelaminated board with decorative lamination_(premium quality), plywood 18mm _(premium quality), plywood 9mm _(premium quality), mica 0.8 mm_(premium quality), colour mica sheet _(premium quality), fevicol_(premium quality), sand paper_(premium quality), mosquito mesh steel_(premium quality), window grill with making charge_(premium quality), aluminum window frame 3 track sliding (2 glass + 1 mosquito shutter)_(5 feet x 4 feet premium quality), aluminum window frame 3

State Government

CTN :41786946

08 Oct, 2025 NA

Jharsuguda - Odisha

Tender For supply of pump spares - "o ring - suc & brt cover with o casing,part no:01moc:neoprene rubberpump model no: ar 300/750a", "gasket (flange s. cover),part no:g5moc:caf-9pump model no: ar 300/750a", "o ring (inner casing with wear plate),part no:2moc:neoprene rubberpump model no: ar 300/750a", "o ring (gland housing with wear plate),part no:5moc:neoprene rubberpump model no: ar 300/750a", "o ring (gland housing with cover),part no:6moc:neoprene rubberpump model no: ar 300/750a", "o ring (impeller with impeller nut),part no:7moc:neoprene rubberpump model no: ar 300/750a", "o ring (doom nut),part no:8moc:neoprene rubberpump model no: ar 300/750a", "o ring (impellr nut with expeller),part no:9moc:neoprene rubberpump model no: ar 300/750a", "o ring (sleeve with expeller),part no:10moc:neoprene rubberpump model no: ar 300/750a", "o ring (liquid thrower with shaft),part no:11moc:neoprene rubberpump model no: ar 300/750a", "o ring (suction cover with wear plate),part no:12moc:neoprene rubberpump model no: ar 300/750a", "outer casing (top/bottom),part no:20 & 15moc:astm a 216 gr.wcbpump model no: ar 300/750a", "outer bearing cap,part no:5moc:is 210 fg 260pump model no: ar 300/750a", "gland housing,part no:9moc:astm a743 ca40pump model no: ar 300/750a", "shaft sleeve,part no:12moc:astm a743 ca40pump model no: ar 300/750a", "wear plate (b. side),part no:16moc:astm a 532 class iii type apump model no: ar 300/750a", "inner casing,part no:17moc:astm a 532 class iiitype apump model no: ar 300/750a", "impeller with nut,part no:18moc:astm a 532 class iii type apump model no: ar 300/750a", "wear plate (s. side),part no:19moc:astm a 532 class iii type apump model no: ar 300/750a", "flange (s.cover),part no:70moc:astm a 216 gr.wcbpump model no: ar 300/750a", "suction cover,part no:21moc:astm a 216 gr.wcbpump model no: ar 300/750a", "bracket side cover,part no:25moc:astm a 216 gr.wcbpump model no: ar 300/750a", "oil breather,part no:26moc:bs 970 en 8pump model no: ar 300/750a", "doom nut & t-bolt,part no:33 & 34moc:bs 970 en 8pump model no: ar 300/750a", "rubber gasket (s.flange),part no:59moc:neoprene rubberpump model no: ar 300/750a", "gasket (brg cap),part no:g1moc:caf-9pump model no: ar 300/750a", "gasket (outer casing),part no:g4moc:caf-9pump model no: ar 300/750a", "shaft with keys,part no:4moc:bs 970 en 8pump model no: ar 300/750a", "inner bearing cap,part no:6moc:is 210 fg 260pump model no: ar 300/750a", "bearing spacer,part no:7moc:is 210 fg 260pump model no: ar 300/750a", "lock washer,part no:48moc:is 2062 mspump model no: ar 300/750a", "gland plate,part no:10mmoc:astm a 216 gr. wcbpump model no: ar 300/750a", "liquid thrower,part no:11moc:astm a 216 gr. wcbpump model no: ar 300/750a", "expeller,part no:14moc:27% hichromepump model no: ar 300/750a", "gland ring,part no:24moc:astm a 216 gr. wcbpump model no: ar 300/750a", "end plate,part no:29moc:is 210 fg 260pump model no: ar 300/750a", "expeller key,part no:31moc:aisi 304pump model no: ar 300/750a", "coupling/pulley key,part no:32moc:bs 970 en 8pump model no: ar 300/750a", "spring set,part no:41moc:steelpump model no: ar 300/750a", "lock nut,part no:47moc:astm a 216 gr. wcbpump model no: ar 300/750a", "oil level indicator,part no:54moc:glass with brass tubepump model no: ar 300/750a", "gland housing pin,part no:57moc:bs 970 en 8pump model no: ar 300/750a", "impeller bolt & hex nut,part no:30moc:aisi 410pump model no: ar 300/750a", bare pump,model no: ar 300/750a, "o-ring (back liner),part no:46moc:neoprene rubberpump model no: ar 150/500a", "o-ring (back liner/casing),part no:47moc:neoprene rubberpump model no: ar 150/500a", "o ring (distance piece),part no:48moc:neoprene rubberpump model no: ar 150/500a", "o ring (shaft sleeve),part no:49moc:neoprene rubberpump model no: ar 150/500a", "o ring (st.box),part no:60moc:neoprene rubberpump model no: ar 150/500a", "fasteners set,part no:--moc:hts/mspump model no: ar 150/500a", "pump pulley (520-88-sc3),part no:--moc:is 210

corporations/Associations/Others

CTN :41508588

14 Oct, 2025 9.77 Crore

Pune - Maharashtra

Tender For corrigendum : request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm c

Central Government/Public Sector

CTN :42126425

03 Nov, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of longitudinal stop end plate for lhb coaches.

corporations/Associations/Others

CTN :42118636

03 Oct, 2025 NA

Srinagar - Jammu And Kashmir

Tender For auction sale of boot dms,mss (chain non skid),fire extinguisher etc.,mix clothing etc.,radiator assy o/s,jack liftingo/s,canvas scrap o/s,woollen rags o/s,tarpauline rags o/s,rubber scrap o/s,self startor motor assy o/s,iron scrap o/s,iron scrap,helmet o/s,gen set 11 kva with trolley,tin scrap o/s,eng assy o/s etc.,boot ri,bty o/s etc.,boot dms,,clutch plate assy o/s,pressure plate assy o/s,mt scrap

End Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others