Latest end plate Tenders | Government end plate Tenders

Central Government/Public Sector

CTN :44914335

15 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For bid to ras supply of 245 kv 800/1250a bottom end plate t0 drg: 35380401021# 01rev03 and as per spec. aa12114 rev03 on drg.

Central Government/Public Sector

CTN :45512858

15 Jun, 2026 NA

Bokaro - Jharkhand

Tender For 4 sqmm cable terminal blocks,(10items) comprising of following: 1 - 4 sqmm cable terminal blocks, , 2 - 6 sqmm cable terminal blocks , 3 - 10 sqmm cable terminal blocks , 4 - 35 sqmm cable terminal blocks , 5 - 25 sq mm cable terminal blocks , 6 - 16 sq mm cable terminal blocks , 7 - 1.5 sq mm cable terminal blocks , 8 - 1 sq mm cable terminal blocks , 9 - end clamps for end plates , 10 - end plates for 4,6,10 mm terminals ,

Central Government/Public Sector

CTN :45512819

15 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For ,[1] gasket, lub.pipe dwn:a3/210.03.007/59408 50.000 ea,[2] gasket,end plate,a3/210.03.007/59408 70.000 ea,[3] gasket,cover to housing,pn:10170224 400.000 ea

Central Government And Public Sector

CTN :45515519

23 Jun, 2026 NA

Palakkad - Kerala

Tender For supply of spares for ingersoll rand impact wrench - rotor 23153 (model-ir 231c ), bearing 402-22 (model-ir 231c ), bearing 4u-97 (model-ir 231c ), end plate gasket 231-283(model-ir 231c ) , trigger 631l-93 (1" sq.drive -model), vane 2131-42a-6 (model-ir 231c )

State Government

CTN :45263804

22 Jun, 2026 4.63 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply of various equipments - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles, karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard, refrigerated centrifuge (bench top), bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples., gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25m (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25m),, "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 l recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:, matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water., ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubings, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 l, 20 l, 50 l, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each of, c8 = 250 4.6 5m c18 = 250 4.6 5m, cyano = 250 4.6 5m. amino = 250 4.6 5m, phenyl = 250 4.6 5m. silica = 250 4.6 5m., all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., ft-ir with atr & liquid cell, " hydraulic press with kbr die and pellet holder, suitable mortar pestle (dia 5-6 cm), suitable portable de humidifier to maintain 30- 60% rh, temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab., reference nist standard polystyrene film (0.3 mm) over the range of 3800 cm-1 to 650 cm-1., abbes r

CTN :45513429

20 Jun, 2026 3.50 Lacs

Leh - Jammu And Kashmir

Tender For supply of flex banner , books on local culture and tradition for library , stationary , advertisement in local media , memento , gift hampers , disposal plate , disposal glass , disposal bowl , water bottle

Central Government/Public Sector

CTN :45499729

22 Jun, 2026 4.20 Lacs

Kozhikode - Kerala

Tender For tender for supply of oil bilge water separator spares - pressure relief valve (part no. ms500) , pressure gauge (part no. ms223) , end plate (part no. ms026) , wing nut (part no. ms025d) , draw bolt 11 inch (part no.ms022) , coalescar filter (part no. ms019) , alir eliminator kit (part no. ms002) , wadding cloth (cs25120) , annual granular media (part no. cs11081) , gasket (part no.ms641)

Central Government/Public Sector

CTN :45073196

18 Jun, 2026 NA

Barh - Bihar

Tender For corrigendum : procurement of generator spares for capital overhauling of 660 mwgenerator for ntpc barh stage ii - bolt,bhel/siemens, compensating shim t=0.2:pm0a65k64b32, compensating shim t=0.5:pm0a65k64b24, compensating shim t=1:pm0a65k64b08, compensating shim t=16:pm0a66h33k73, cover:psk047t028, covering:pm0a67e75c51, cup spring 28*12,5*1,9:pm0a00b34k08, cup spring washer 34*17*1,8:pm0a00a44e79, filling piece:psk037r039, gasket a29*4:pm0a00c64d90, grub screw:psk050p534, grub screw m5*12-0spae:pm0a00a27a52, grub screw m5*8:pm0a67k47h70, grub screw m6*8-0spae:pm0a00a26h73, grub screw m6*8-0spae:pm0a00a27a78, hexagon head screw m10*16:pm0a66h94f53, hexagon head screw m10*40:pm0a54j70g62, holder:pm0a65j76f67, hose:pm0a67f97g74, hose clip 4,8*188:pm0a57a15h52, insulating bolt:pm0a65j76f83, insulating washer b20,5*40*4:pm0a55g45f8, insulation:pm0a66j04g42, lock washer:pm0a67f56a27, lock washer :pm0a67c01b11, lock washer :pm0a67b70c58, lock washer 16*116:pm0a67b69c27, locking bar:pm0a52j27e74, locking bar:pm0a52j27e82, l-profile:pm0a58a64j33, o-ring 320*7:pm0a67c71k57, pipe 11*1,4*57:pm0a65g63a07, pipe 17*2,4*15:pm0a66d91d35, pipe 20*1,9*21:pm0a67k38f22, pipe 20*1,9*34:pm0a66j26k00, pipe 20*1,9*61:pm0a66j04g59, plate 0,1*10*780 :pm0a67a24e63, plate 0,5*55*780:pm0a67a24e71, plug:pm0a67k48e63, plug-in brush holder:p0048962100, profile 103-002*780:pm0a67k52d33, round bar 10 mm: pm0a62b42a70, round bar 5 mm:pm0a55e59e65, round bar 6 mm:pm0a62b42a47, round bar 8 mm:pm0a62b42a54, round nut:pm0a65f52c42, round nut epgm203:pm0a66j13c54, screw bolt ep-gf:pm0a66j13c70, screw plug g1/2a:pm0a00a45d44, screw plug m10*15:pm0a57j42e78, screw plug m20*18:pm0a57j42e86, seal cap:pm0a55a10c43, seal cap:pm0a50b67e02, segment epgc203:pm0a66h52h42, sheet:pm0a67a56c67, sheet epgm203:pm0a66h53b61, shim 12*2:pm0a66e09a79, shim epgc203:pm0a66h73h14, washer b12,5*22*3:pm0a50a00j43, washer b13*28*4:pm0a50a35j23, washer b17:pm0a00a38d07, washer b6,4*11,5*1,5:pm0a61e49e01, plug-in brush holder, hose line, profile, insulating ring l=19, oring d74x3, viton rubber profile l=2670, seal ring, o-ring, o-ring, o-ring,072-00 psk047q570,bhel, sheet, insulating part, insulating part, profile 7.5*9*2400, insulation, pipe 16*1.9*19, 900/7000r:filter mat, kwu:seal strip, insulation, compensating shim:pm0a65k64a74, lock washer 10*70:p0048963500, multi contact band;drg01430501044/16, elr70/90:scru hex a -8.8, m16x120, hex hd bolt,bhel,thdf-115/67, hex hd nut,m16,hts,bhel,thdf-115/67, insulating bolt,111,m12x35,bhel, insulating bolt,112,m12x35,bhel, resin cy-205 for bhel make generator, loctite 222,01350801039,bhel,thdf-115/67, anabond 202,bhel,thdf-115/67, spacer, locking shoe, fbr gls tape,bhel,thdf-115/67, polyster fibre glass tape is:10415, shim epgc203:pm0a66h53a62, shim epgc203:pm0a66h53a70, shim epgm203:pm0a66h53a88, small size valve:psk054u053, spring ring a8:pm0a00a39g10, spring washer b16:pm0a00a44b07, spring washer b8:pm0a52h67d24, taper pin:pm0a61a48h16, washer 24-200hv:pm0a00a38b17, washer a17*35*4:pm0a00a43f96, angle,pm0a67g05g00,bhel,thdf-115/67, ball valve dn25-g1;pn25:psk033p294, brush holder:pm0a68a48e12, gasket,pm0a66a41g90,bhel,thdf-115/67, holding piece:psk017k700, initial guide blade:pm0a67h32k33, initial guide blade:pm0a67h32k41, initial guide blade:pm0a67h32k58, parallel pin a20h8*80:pm0a67f19c31, round nut:pm0a00b79b92, screw bolt:pm0a56k80a22, stationary blade:pm0a67h32j75, stationary blade:pm0a67h32k09, stationary blade:pm0a67h32k17, thdf115/67:insulating gasket, ring, o ring to spec. tg 60158 32x3, seal element, oring 28x3, u-profile ring, o-ring, o-ring, o-ring,01393701017&52,bhel,thdf-115/67, scru hex, bolt hex hd,01390101053,bhel,thdf-115/67, o-ring,11390801007,bhel,thdf-115/67, o-ring,bhel,thdf-115/67, thdf115/67:o ring 193x6, curing agent z,01391201117 & 39,bhel, resin e8702, fine mica powder,01391201117 & 35,bhel, hardener,bhel,thdf-115/67, tension disc, taper pin;end shield(ee)#38#01393701000, araldite av 138,01350801035,bhel, ch

Central Government/Public Sector

CTN :44712338

12 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For bid to ras corrigendum : supply of cnc machined forged pole end plates (including material) as per drg 22530228701(ref. tech. com. sheet)

State Government

CTN :45496730

17 Jun, 2026 NA

Khaperkheda - Maharashtra

Tender For work of coating of condenser tube end plates by brush able ceramic coating and water box by anti-corrosive chemical coating along with supply in unit 1 during coh at khaperkheda tps.

End Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors