Latest end wall Tenders | Government end wall Tenders

Central Government/Public Sector

CTN :40888265

01 Jul, 2025 NA

Kanakapura - Karnataka

Tender For set of end wall assly for lhb slrd amrit bharat coaches. note:-(1)in drawi ngs "mig welding (131) is to be read as tig welding (141)" as per design letter no. md462 31 dated 16.03.2024. (2)firm shall collect all latest/final drawings before manufacturi ng. there may be minor modification in design ., as per drawing: mp24ewalslrdab version 5 , packing instruction: 1. the supplier shall pack the end wall in a suitably designed returnable fixture in such a way that end wall shall not get scratched, damaged, twis ted during transportation, storage and lifting and to avoid scratches on outer surfa ce. it should be seperated by suitable environment friendly blocks to avaoid rubbing o f two endwall surfaces . it should have standard clamping /fastening mechanism so th at it can be opened easily. it should have firm's identification mark. 2. first returanable fixture along with end wall be retained by rcf & this fixture shall be exchanged in the second lot supply and so on. at the end of the contact, the firm shall collect the rem aining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated having sufficient strenght to bear approximate 2 tonne load in static & mov ing condition of two coach sets of end wall. 4. the fixture /frame/pallet should be desi gned so that the packed end wall preferably remain in vertical position to minimize sur face area. 5. it should also be suitable for storage of end wallunder open sky. [ warra nty period: 30 months after the date of delivery ]

State Government

CTN :40880289

19 Jul, 2025 NA

Karur - Tamil Nadu

Tender For supply and installation of lv busducts for rsps-2 in tnpl unit-i - lv busduct 415v, 4000a, 3 ph, 4 wire, non-segregated al. (total no. of busduct is 2 nos.), route length of busduct (4000a, 3ph,4w), 90 deg bend., adaptor box at transformer end., adaptor box at switchgear end., tinned cu. flexible at transformer end, tinned cu. flexible at switchgear end, aluminium expansion joint in the run., rubber bellow assembly at transformer end, wall frame assembly with sealing plate, space heater, marshalling box assembly, silica gel breather, phase cross over assembly, drain plug, hot dip galvanized structure for supports for bus ducts, lv busduct 710v, 3200a, 3 ph, 4 wire, non-segregated al. (total no. of busduct is 1 no.), route length of busduct (3200a, 3ph,4w), 90 deg bend., adaptor box at transformer end., adaptor box at switchgear end., tinned cu. flexible at transformer end, tinned cu. flexible at switchgear end, aluminium expansion joint in the run., rubber bellow assembly at transformer end, wall frame assembly with sealing plate, space heater, marshalling box assembly, silica gel breather, phase cross over assembly, drain plug, hot dip galvanized structure for supports for bus ducts, spares, silica gel breather, lump sum fees for erection services, the scope includes installation and commissioning of 3 sets. of lv busducts along with accessories at tnpl unit-i rsps-2 project site.expenditure towards boarding, lodging and local conveyance shall be in bidder s scope.

Central Government/Public Sector

CTN :40837477

29 Jul, 2025 NA

Kanakapura - Karnataka

Tender For end wall assembly note:-in drawings " mig welding (131) is read as tig weldi ng (141) " as per design letter no. md46231 dated 16.03.2024 , as per drawing: lp15112 alt. ' h' & mdts21332 rev-00 dated 09.06.2020 ,fitted alongwith shutter complete to drg.no. 2 10113.0.76.300.012 alt'-r1', packing instruction: 1. the supplier shall pack the end wall in a s uitably designed returnable fixture in such a way that end wall shall not get scratch ed, damaged, twisted during transportation, storage and lifting and to avoid scratch es on outer surface. it should be wrapped with enviroment friendly material and it sho uld have standard clamping /fastening mechanism so that it can be opened easily. it sh ould have firm's identification mark. 2. first returanable fixture along with end wall b e retained by rcf & this fixture shall be exchanged in the second lot supply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixt ure from rcf. 3. the packing fixture/frame to be fabricated having sufficient strenght to bear approximate 2 tonne load in static & moving condition of two coach sets of en d wall. 4. the fixture /frame/pallet should be designed so that the packed end wall pre ferably remain in vertical position to minimize surface area. 5. it should also be suitabl e for storage of end wallunder open sky. [ warranty period: 30 months after the date of deli very ]

Central Government/Public Sector

CTN :40836586

25 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For one coach set of roof 2 mm sheet sidewall and end wall for lws - rcf design to drg. nos. 1) roof a ssembly to drg. no. 581 16 032, alt 'l' - 1 no 2) end roof assembly to drg. no. 581 16 066, alt 'g' - 2 nos 3) sidewall to drg. no. 752 14 023, alt 'nil' - 1 no welding pin to be assembeled as per drg. no. 58110037, alt 'nil' with latest s ub drawing 49516008, alt 'a'. 4) end wall to drg no 741 15 001, alt 'h' - 2 nos the firm shall fulfill the requi rement as per icf/md/specn 200 issue status-01, rev.04 amendment no.01. the firm shall fulfil the re quirement as per icf/md/spec-315,issue status-01, rev.00 firm has to supply roof and sidewall without apply ing etch primer. special condition : packing for roof and side wall as per icf/j&t/misc-2201, alt -'e' safet y instruction as per icf/j&t/sk-1867, alt 'nil' packing for end wall as per drg.icf/j&t/sk-1809, alt-'a' [s afety item ]

Central Government/Public Sector

CTN :40811109

26 Aug, 2025 NA

Chennai - Tamil Nadu

Tender For one coach set of roof, sidewall and end wall for amrit bharat lws/pp2 (754) 1. roof ass embly to drg no 75416001, alt 'a' - 1 no 2. end roof assembly to drg no 97216008, alt 'a' - 2 nos 3. sid e wall to drg no 75414001, alt 'a' - 1 no 4. end wall to drg no 75415001, alt 'e' - 2 nos welding pin arr angement to drg no 58110037, alt 'nil' had to be assembled on roof and sidewall. the firm shall fulfil the requirement as per icf/md/specn.200, issue status 01, rev 04 with amendment no 01. the f irm shall fulfil the requirement as per icf/md/spec-315,issue status-01, rev.00 firm has to supply roof and sidewall without applying etch primer. to be supplied in coach set special condition : this is a new build and there will be minor changes in drawing. firm shall obtain final d rawing from icf before start of manufcturing. packing for roof and side wall as per icf /j&t/misc-2201, alt "e" safety instruction as per icf/j&t/sk-1867, alt 'nil' packing for end wa ll as per drg.icf/j&t/sk 1809, alt "a". [safety item ]

Central Government/Public Sector

CTN :40796897

24 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For shell kit item for parcel van. a) underframe complete to drg.no. rvp11119 alt.'f' a nx-3 - 1 no. the manufacturing facility as per icf/md/spec-147 issue status-01 rev.02 with amendme nt no.01 b) roof assembly to drg. no. 88816001, col-i, alt 'a', - 1 no. c) end roof assembly to drg. n o. 88816005, col-i, alt 'nil' - 2 nos. d) location of side wall assembly to drg.no. 88814001, col.i,alt 'a '-1 no. roof flange and carline in sidewall to be made of single piece crf. end sidewalls to drg nos. 88 814009 alt'a' and 88814010, alt'a' to be supplied as loose. the firm shall fulfill the requirement as per i cf/md/spec-200, issue status.01, rev-04 with amendment no.01. e) end wall complete to drg.no. 888 15001 alt "a" -2 nos. f) supply and installation of body shell items and partition frame i) supporting m embers on trough floor vp10133 alt 'c' col-i - 1 no. ii) fixing arrgt. of collapsible door vp10147 col-i -1 no. iii)location of back pieces for sliding door vp10149 col-i anx-1-1 no. iv) bracket complete for mou nting dummy 58110017 col-i alt b -2 nos. v) body shell items as per vp10146 alt e anx-3 item-13- 4 n os, item-14 -4 nos, item-15-2 nos, item-16-4 nos, item-19-4 nos. vi) 53810092 alt 'nil' - 2 nos. vii) vp10 164 alt 'nil' - 2 nos. viii) 88810006 alt 'nil' - 1 no. g) rain water gutter 2.11012.0.20.110.100 - 4 nos. h ) bracket for destination board 58126002-4 nos,58126003-4 nos. i) roof ventilator to drg.no. wlrrm(0 18)-7-3-401 alt 'q' col.i -5 nos. j) supply and installation of sliding door to drg. no. vp58001 alt 'a'-1 no. and vp10002 alt. b- 1 no. special condition : special condition a. the under frame should be su pplied as normal side up and side bearer side down. packing condition as per drg. no. icf/j&t/misc-24 87, alt 'b' finished components, except ss components shall be thoroughly cleaned and applied with e poxy zinc phosphate primer as per rdso spec. no.m&c/pcn/100/2018 to a dft of minimum 60 micron s and mdts-094, rev.01 with amendment-01 shall be followed for procedure and colour shade exclu ding the areas as specified in detail drawings.before applying primer, the top of the sole bar(40mm) to be masked along with the shell joining areas of end wall and side wall. b,c,d & e. packing as per icf/j& t/misc-2201, alt 'e' packing as per icf/j&t/sk-1809, alt 'a' f & j.: installation required as per assembly drg. after shell assembly & annexure 'a' 13.09.2023 to be followed. supply rates and installation rat es to be quoted separately. to be supplied as a kit before the start of manufacturing, the fi rm shall contact the design office for clarifications/ updation. [safety item ]

Central Government/Public Sector

CTN :40803707

03 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply of end wall assembly for lhb gs & scn (amrit bharat ) coaches note:-(1)in dra wings "mig welding (131) is to be read as tig welding (141)" as per design letter no. md4 6231 dated 16.03.2024. (2)firm shall collect all latest/final drawings before manufactu ring. there may be minor modification in design., as per drawing: 75415001 alt. 'br1', packing instruction: 1. the supplier shall pack the end wall in a suitably designed returnable fixt ure in such a way that end wall shall not get scratched, damaged, twisted during tra nsportation, storage and lifting and to avoid scratches on outer surface. it should b e seperated by suitable environment friendly blocks to avaoid rubbing of two endwall surfaces . it should have standard clamping /fastening mechanism so that it can be ope ned easily. it should have firm's identification mark. 2. first returanable fixture along with end wall be retained by rcf & this fixture shall be exchanged in the second lot su pply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated havi ng sufficient strenght to bear approximate 2 tonne load in static & moving condition o f two coach sets of end wall. 4. the fixture /frame/pallet should be designed so that t he packed end wall preferably remain in vertical position to minimize surface area. 5. it should also be suitable for storage of end wallunder open sky. [ warranty period: 30 m onths after the date of delivery ]

CTN :40803166

14 Jul, 2025 NA

Jamalpur - Bihar

Tender For supply of alloy steel turn buckle capacity-10 ton, 3 meter chain both side of turn buckle for tightening of side wall and end wall. as per dimension (i)maximum length of turn buckle -1200mm (ii)minimum length of turn buckle -700mm (iii)alloy steel rod dia-24mm (iv)alloy steel screw dia-48mm (v)length of screw-50 0mm (vi)alloy steel chain dia-18mm and length-3mtr [ warranty period: 30 months after the date of deli very ]

Central Government/Public Sector

CTN :40738095

03 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply of end wall assembly for lhb gs & scn (amrit bharat ) coaches note:-(1)in dra wings "mig welding (131) is to be read as tig welding (141)" as per design letter no. md4 6231 dated 16.03.2024. (2)firm shall collect all latest/final drawings before manufactu ring. there may be minor modification in design., as per drawing: 75415001 alt. 'br1', packing instruction: 1. the supplier shall pack the end wall in a suitably designed returnable fixt ure in such a way that end wall shall not get scratched, damaged, twisted during tra nsportation, storage and lifting and to avoid scratches on outer surface. it should b e seperated by suitable environment friendly blocks to avaoid rubbing of two endwall surfaces . it should have standard clamping /fastening mechanism so that it can be ope ned easily. it should have firm's identification mark. 2. first returanable fixture along with end wall be retained by rcf & this fixture shall be exchanged in the second lot su pply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated havi ng sufficient strenght to bear approximate 2 tonne load in static & moving condition o f two coach sets of end wall. 4. the fixture /frame/pallet should be designed so that t he packed end wall preferably remain in vertical position to minimize surface area. 5. it should also be suitable for storage of end wallunder open sky. [ warranty period: 30 m onths after the date of delivery ]

CTN :40780863

17 Jul, 2025 NA

Kharagpur - West Bengal

Tender For supply of end wall door complete. drawing: rcf drawing no. lw56350, alt.- h. matl.& specn : rc f's specification no. mdts-082, rev.-04. [ warranty period: 30 months after the date of delivery ]

End Wall Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors