Get complete information related to latest Engine Control Panel Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Engine Control Panel Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Engine Control Panel Tenders.
Tender For supply of 500 kva ,1500 rpm, 415v 0.80pf -lag dg with radiator and accessories on common base frame , 500 kva dg set - fuel day tank of 990 litres capacity with accessories and stand. , 500 kva dg set-24v dc, 360 ah ,minimum, lead acid type automotive battery with accessories and stand, to be supplied at the time of commissioning. , 500 kva dg set-float cum boost battery charger panel with stand for one dg , 500 kva dg set-necessary fuel piping, supports, accessories for one dg , 500 kva dg set-silencers, exhaust piping and stack, support structures support structure with foundation bolts and accessories, insulation and cladding and hardwares. height as per latest cpcb norms. , 500 kva dg set-acoustic enclosure for one dg with lighting fixtures. , 500 kva dg set-lt power, control, instrument and screened cable including all accessories like lugs, glands, ties etc. for one dg set. , 500 kva dg set-engine b-check kit for one dg, to be supplied at the time of commissioning. , 500 kva dg set-first fill of lube oil, coolant and coolant conditioner at site for one dg, to be supplied at the time of commissioning. , 500 kva dg set-tools and tackles specific to offered dg set. , 500 kva dg set-alternator terminal box with extension busbars , 500 kva dg set-amf panel for 500kva dg set , 500 kva dg set-mandatory spares for 500kva dg set and panels , 500 kva dg set- supervision of erection of one dg set with exhaust piping and structure, fuel piping, controlpanels and cabling , 500 kva dg set-supervision of testing, pre-commissioning checks, and commissioning and load trial of one dg set with controlpanels as per operating philosophy. , 750 kva ,1500 rpm, 415v 0.80pf -lag dg with radiator and accessories on common base frame , 750 kva dg set -fuel day tank of 990 liters capacity with accessories and stand. , 750 kva dg set -24v dc, 360 ah, minimum, lead acid type automotive battery with accessories and stand, to be supplied at the time of commissioning. , 750 kva dg set- float cum boost battery charger panel with stand for one dg , 750 kva dg set-necessary fuel piping, supports, accessories for one dg , 750 kva dg set-silencers, exhaust piping and stack, support structures support structure with foundation bolts and accessories, insulation and cladding and hardwares. height as per latest cpcb norms. , 750 kva dg setacoustic enclosure for one dg with lighting fixtures. , 750 kva dg set-lt power, control, instrument and screened cable including all accessories like lugs, glands, ties etc. for one dg set. , 750 kva dg set-engine b-check kit for one dg, to be supplied at the time of commissioning. , 750 kva dg set-first fill of lube oil, coolant and coolant conditioner at site for one dg, to be supplied at the time of commissioning. , 750 kva dg set-tools and tackles specific to offered dg set. , 750 kva dg set-alternator terminal box with extension busbars , 750 kva dg set-amf panel for 750kva dg set , 750 kva dg set-mandatory spares for 750kva dg set and panels , 750 kva dg set- supervision of erection of one dg set with exhaust piping and structure, fuel piping, controlpanels and cabling. , 750 kva dg set-supervision of testing, pre commissioning checks, and commissioning and load trial of one dg set with controlpanels as per operating philosophy. , freight
Tender For bridge unloader - bridge unloader, 1. design, manufacturing and supply of heavy duty out door bridge for sugar mill plant cane unloading conforming to is:807-1976 & is:3177- 1977 fabricated from m.s. plate section conforming to is:226/2062 steel in box type design with and carriage fitted with wheel of fusion welded having l type bearing housing for long travel (lt) wheel assemblies having span-22.00 mtrs capacity -05ton swl along with dismantling of old existing bridge and erection and commissioning of new bridge old existing cross travel trolley will be used. type of bridge-m.s. plate fabricated box type span-22.00 mtrs, unloading capacity -05 ton swl2. techincal specification:-type of bridge -box type (m.s. plated fabricated), capacity-05 ton swl, unloading capacity -80 to 100 ton cane/hr, utility-sugar cane handling, height of top of top rail from ground-10.00 mtrs, height of lift-12.50 mtrs, wirerope19mm, 6/36 construction fibre wire, long travel speed -23-25 meter/minute, box side plate height-1250mm, box side plate thickness8mm, top & bottom plate thickness-top plate-12mm thick, bottom plate-10mm thick, top & bottom plate width-500mm, baff /stiffener plate spacing -750mm, baffle/stiffener plate thickness-8 mm., 3. end carriage:- length-5000mm, height-450mm, centre distance for end carriage wheel-4500mm,centre distance of trolley wheel as per previous trolly.4. long travel mechanism:- size of rail top at long travel- width-60mm, height-25mm, size of rail section at cross travel-width-60mm, hight25mm.5. electric motors for long travel drive 5.3hpx960 rpm rating s4 duty, qty-02 nos.6. gear box for long travel:- type helical,model-hb-350, ratio-40:1, service factor-greater than 2 on installed power, qty-02 no7. coupling for long travel drive:- type geared type half gear model1038. breaks:- thruster-electro hydraulic thruster 18 kg/cm , dia-6", qty 02 no., floating shaft dia/length-70mm/800mm-1000mm9. wheel:- dia meter-420mm, bearing-22218 skf/fag make, housing l type, qty-04 nos, note:- (i)fabrication will be done using prime plates and sections and using mig, welding process. (ii)only tack welding will be done by electrode using arc welding(iii) parallelist of the cross travel rails/square bar, diagonals, deflection of the bridge & trolley will be accurate and confirming to standard and best engineering practices. (iv) bridge must be two coated by red oxide metal primer and two coats of golden yellow colour.11. electric panel for new bridge, resistance boxes for bridge motors, control cabin,12. electric wires, main switch push button control & cable trolleys for complete13. unloader.14. dismantling of old trolly and all its accessories and erection & commission of new trolly, frame and fitting of all old spares ie. rope, drum, thruster break etc complete testing and trail., scope of work1. supply of above mentioned bridge on for basis to mill site.2. dismantling of old unloader. 3.erection of new unloader bridge with old trolley & grab with complete electric work with new electrical panel for bridge and all electrical panel for trolley & grab. all wiring should be new & standard isi make
Tender For providing of custom bid for services - preventive maintenance of ht lt substation including ht lt panels cable bus bar terminal connections installations db panels,custom bid for services - electrical supply and substation maintenance including ht lt capacitor panel repairs by skilled linemen license,custom bid for services - preventive maintenance of low voltage switch board power point terminal capacitor bank power factor panel 500 kva step down transformer lt ht acb ocb panels and relays substation,custom bid for services - passenger lift otis make 88 kg 13 passenger and diesel generator set 40 kva,custom bid for services - maintenance and water supply emf building repair and operation of submersible 01 booster pump 02, 5 hp each kirloskar make water tank 13 and allied equipment and pipelines,custom bid for services - camc of split and window ac 06 nos capacity 02 ton,custom bid for services - camc of portable fire bottles of abc type 34 nos,custom bid for services - civil repair works such as minor civil work minor structural rep
Tender For 1)supply of two nos. of out door type 750kva, 11kv/415v, onan auxiliary transformer along with oil as per site requirement 2)supply of lt copper power cable 400v, 1.1kv grade pvc armored 3.5 core 2rx 400 sqmmm along with lv cable termination accessories,lugs etc 3)dismantling of existing 2 nos. of 750kva auxiliary transformers and old oil cooled cables at ltac panel and auxiliary transformer end and its accessories 4) laying of lt copper power cables and termination of cables along with supply of all accessories for laying of cables 5)erection, cabling, testing and commissioning of 2 nos. of 750kva,11kv/415v auxiliary transformers 6)buy back of released two nos. of 750kva auxiliary transformers along with oil
Tender For supply of 3 x 2000 kva emergency dg set and accessories for singrauli stpp stage iii 2x800mw - 2000 kvae 1500 rpm, 415v, 0.80 pf -lag , prime power dgset with radiator on common base frame , fuel day tank of990 litres capacity with accessories , 24v dc, 360ah,minimum, lead acid automotive type battery , 24 v dcfloat cum boost battery charger , necessary fuel pipingfrom day tank to engine , exhaust piping , with insulationand aluminium cladding upto 30 meters height withsupports , galvanised pre-fabricated support structure forexhaust piping -common for two dg , galvanised prefabricated support structure for exhaust piping-for one dg ,acoustic enclosure for one dg with ventilation fans, exhaustfans, if applicable and lighting fixtures. , lt power, controland instrument cable including all accessories like lugs,glands, ties etc . , b-check kit to be supplied at the time ofcommissioning , first fill of lube oil, coolant and coolantconditioner to be supplied at the time of commissioning ,tools and tackles for offered dg set. , alternator phase sideand neutral side terminal box with ct , mandatory sparesfor dg sets and panel , amf panel , supervision of erectionfor one dg set. , supervision of testing, commissioning andload trial of one dg set. , total freight charges for allsupplies including spares
Tender For supply, installation, testing and commissioning of 750 kva 3 phase silent dg set having engi ne speed 1500 rpm and duly coupled with 750kva/600kw alternator mounted on a common ms channel ba se frame with avm including amf panel compliant with cpcb- iv+ or latest with all associated system and a ccessories and complete, enginecontrolpanel with microprocessor based controller, fuel tank, battery ter minal cable with external charger, control cables between dg set and controlpanel, acoustic enclosure, sil encers bellows etc with cladding as per latest cpcb norms, supply laying and termination of control and po wer cables between dg set and distribution panels, including first fill of lube oil, coolant and necessary pro per earthing as per direction of eic at site as per cpwd's latest specification. make: cummins/kirloskar/per kins/jackson or similar reputed brand with good after sales track record. sitc cost includes warranty period of 24 (twenty four) months from the date of commissioning. 10 years camc will be followed after completi on of warranty as per item no. 2. inspection : rites [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]
Tender For corrigendum : supply of 3 x 2000 kva emergency dg set and accessories for lara stpp stage ii 2x800mw chhattisgarh - 2000 kvae 1500 rpm, 415v, 0.80 pf -lag-, prime power dg set with radiator on common base frame , fuel day tank of 990 litres capacity with accessories , 24v dc, 360 ah, minimum, lead acid automotive type battery , 24 v dc float cum boost battery charger , necessary fuel piping from day tank to engine , exhaust piping, with insulation and aluminium cladding upto 30 meters height with supports , galvanised pre-fabricated support structure for exhaust piping, common for two dg , galvanised prefabricated support structure for exhaust piping- for one dg , acoustic enclosure for one dg with ventilation fans, exhaust fans, if applicable, and lighting fixtures. , lt power, control and instrument cable including all accessories like lugs, glands, ties etc , b-check kit to be supplied at the time of commissioning , first fill of lube oil, coolant and coolant conditioner to be supplied at the time of commissioning , tools and tackles for offered dg set , alternator phase side and neutral side terminal box with ct , mandatory spares for dg sets and panel , amf panel , supervision of erection for one dg set , supervision of testing, commissioning and load trial of one dg set , total freight charges for all supplies including spares