Latest engine control panel Tenders | Government engine control panel Tenders

Central Government/Public Sector

CTN :42965996

26 Dec, 2025 37.86 Lacs

Lucknow - Uttar Pradesh

Tender For corrigendum : special repair to lt panel/bus bar panel and connected items at mra vihar usman road mupsa canteen 44 supply depot atal road zro nirbhay vihar 71 mtn bde rsv and yogender vihar area under ge e/m lucknow

Central Government/Public Sector

CTN :43227309

07 Jan, 2026 47.50 Lacs

Delhi - Delhi

Tender For special repair replacement of lt xlpe cable lt panel bus bar chamber street light poles and connected e m items in 202 cedu under ge u elect supply delhi cantt 10

CTN :43219926

14 Jan, 2026 NA

Kamrup - Assam

Tender For supply of a panel with 6nos. of 63a mccbs & appropriate bus- bar arrangement

Central Government/Public Sector

CTN :43166158

02 Jan, 2026 42.00 Lacs

Jamnagar - Gujarat

Tender For special repair replacement of lt panel, bus bar and cables in domestic area at af stn jamnagar under ge (af) jamnagar no 1

corporations/Associations/Others

CTN :42721109

30 Dec, 2025 2.21 Crore

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : manufacture, fabrication, supply,erection, testing and commissioning with 1x8 mva pr.tr,stn transformer, associated equipments, accessories, control panels, control room and electrical works at o.krishnapuram in trichy metro under tkc thro e tener - electrical material supply, power transformer 33/11kv, 8mva power transformer with oltc, breaker along with ct for outdoor ss 33 kv (gc) vcb (out door) 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (600-300/1-1a) with structure and complete accessories with breaker platform., 11kv (lv) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulatedwith permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (1200-600/1-1a) with structure and complete accessories with breaker platform., 11kv (feeder) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (400-200/1-1a) with structure and complete accessories with breaker platform., potential transformer 33kv potential transformer with tc (single phase unit), 11kv potential transformer with tc (three phase unit), panels ac panel for 33kv ss, 110 v dc annunciation panel type b, 110v dc indoor c&r panel for gc breaker, 110v dc indoor c&r panel for lv breaker, 110 v dc indoor c&r panel for twin feeder, control cables, junction box and accessories 14c x 2.5 sq.mm copper cable armoured, 8c x 4 sq.mm copper cable armoured, 4c x 4 sq.mm copper cable armoured, 4c x 2.5 sq.mm copper cable armoured, 2c x 2.5 sq.mm copper cable armoured, isi mark 19 / 22 mm cable gland as directed by the field engineer., isi mark 25 mm cable gland as directed by the field engineer., isi mark cable 28 mm gland as directed by the field engineer., lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination, supply of gi chequerred plate 6mm thickness, junction box supply of ct/pt junction box made out of 14swg (2mm) m.s.sheet wherever required as directed by the field engineer. the box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials. 400w x 300h x 150d, supply of ac junction box of size 535x310x127mm of 18swg ms sheet including hrc fuse unit-18 nos. should be fitted with base, consumables etc. (the box shall be vermin proof, shall have sturdy hinges and locking arrangements), supply of mounting channel suitable for cbtm 5 terminal block in panel /box as required and as directed by the field engineer., supply of disconnected type terminal block suitable for ct circuits in panels/ box as required & as directed by the field engineer, supply of isi mark bakelite hrc fuse holder with fuse of 2/5/10/16 amps reputed make in panels/ boxes for ac/dc/pt circuits wherever required as directed by the field engineer. 16 amps - fuse holder with hrc fuse, 63amps - fuse holder with hrc fuse, bus & bus materials zebra acsr conductor, 2.0" / 50 mm aluminium bus bar (thickness:5 mm), 22/33 kv pt insulators, 11kv pt insulator, 11kv, 120kn disc insulators (antifog), strung bus eye bolt of 18 - 20 mm dia gi rod of required length suitable for 33kv, 22kv and 11kv strung bus including cost of gi rod and 2nos gi nuts & washer as directed by the field engineer., clamps and connectors tension fitting clamp 4 bolted for zebra, t clamp for 2" bus to single zebra, t clamp for zebra to zebra, switchend clamp for single zebra, switchend clamp for 2" busbar, reducer clamp for 2" bus to zebra, pg clamp for zebra, free end clamp for 2"busbar, corana bell for 50mm bus bar, switch end clamp for mink, seating block for 2" bus bar(for g

CTN :43211459

23 Dec, 2025 42.46 Lacs

Shivpuri - Madhya Pradesh

Tender For a. replacement and upgradation of worn out and faulty distribution box,bus bar box,distribution panel,cables at drtc ibmv palace shivpuri mp b. replacement and upgradation of faulty service connection cables and earthing etc at drtc ibmv palace shivpuri mp c. maintenance of electrical installation and fans including repair maintenance of pump sets dg sets street lighting at ibmv palace shivpuri mp sh : routine maintenance of iei and fans including street lighting,compound lighting and operation of dg set,pump set sh: additional work of lighting,fans,street light,flood light etc.subwork/packages:work

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c

State Government

CTN :42268510

22 Dec, 2025 NA

Jabalpur - Madhya Pradesh

Tender For corrigendum : procurement of 400 220 132 kv cnr panel for centralized and distributed bus bar protection scheme

CTN :43111413

19 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of procurement of nidec spares d d--24v,nidec,sfc,gtg7 , ferrite box,nidec,sfc,gtg7 , trafo,1ph,12va,nidec,sfc,gtg7 , relay,interface,125v,nidec,sfc,gtg7 , relay,int,aux,dc,24v,nidec,sfc,gtg7 , cap,2. 2mf,4700v,nidec,sfc,gtg7 , line filter,0. 45mh,10a,nidec,sfc,gtg7 , relay,plugin,24vdc,1co,nidec,sfc,gtg7 , filter,500x625x23,nidec,sfc,gtg7 , relay,plugin,24vdc,3co,nidec,sfc,gtg7 , board,pass,interface,nidec,sfc,gtg7 , fo cable,connector,grey,nidec,sfc,gtg7 , fo cable,sint,nidec,sfc,gtg7 , fo cable,connector,blue,nidec,sfc,gtg7 , inlet ring for fan,1000155253,nidec , mod svth 320 a13,1000280473,nidec , tgunthc2a board,1000297411,nidec , tgunthc2g board,1000297414,nidec , current transformer,1000274625,hat400-s , filter panel 250x250 ,1000180307,nidec , ventil fan radial, 290w,1000305504,nidec , transformer,vltg,elp20068103,nidec , current transducer,500 0. 1,elp224763,lem , kit sk alimentatore,1000136222,nidec , kit sch genda for encod,1000328654,nidec , panel,cntrl,hmi,1000169297,nidec , output relay,1000112177,750-513 000-001 , end module,750,1000073430,nidec,vfd,svnh , duplex lc optic connect,1000152544,nidec , filter-204 with fan,1000201816,nidec , panel filter,with vent,1000201813,nidec , fan,3. 6kw,380480v,1000151726,nidec , assem bus bar capc. svth,1000283805,nidec , fltctl2hp modsvth320a13,1000336094,nidec , analog output,2,4-20ma,1000073431,wago , filter,with fan,1000089778,nidec , wago 750-465,2ai-020ma,1000118555,nidec , simatic s71200,cpu,1000316843,nidec , simatic s7-1200,cm 1241,1000316846,nidec , wago 750-530,8do 24v dc,1000002697,nidec , switch,knife,1000091393,1000113749,nidec

Central Government / Public Sector

CTN :43042189

05 Jan, 2026 NA

Medchal-T - Telangana

Tender For supply, erection, commissioning and testing of igbt based 3-phase drivepropulsion equipment with physical medium i.e. esd/emd/ofg for multi-functional vehicle bus (mvb) as per iec 61375, terminal bracket, bus bar link and cu braid required for connection between main transformer and traction converter, auxiliary converter, interfacing connectors, cables and cable loom required for connection from vcu 1/2 to sb1/2 panel. as per specification no. i)rdso/2008/el/spec/0071, rev.5 for igbt based 3-phase drive propulsion equipment, ii) clw/es/3/0458 alt.e or latest for control cables iii) clw/es/3/0459 alt.c or latest for screenedcable iv) clw/es/3/0124 alt.o or latest. the detailed scope for erection isenclosed at annexure-a. note: -the scope shall also include the removal of allexisting gto-based equipment, viz. burs, srs, and vcus etc., directly related to the provision of the igbt-based 3-phase drive propulsion system withphysical medium, as required for the integration of the new equipment. thedetailed scope for erection is enclosed at annexure-a. associated equipmentremoved during the replacement from gto to igbt shall be refitted (as per thesite engineer's guidelines), as necessary, to ensure proper functioning of the igbtpropulsion system. the firm shall ensure that, upon completion, the propulsionsystem is fully functional in all respects. all works and accessories necessary toachieve this objective, whether explicitly mentioned herein or not, shall be deemedto be included in the scope.(documents attached)

Engine Control Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government / Public Sector