Latest epoxy compound Tenders | Government epoxy compound Tenders

Central Government / Public Sector

CTN :45076868

25 May, 2026 NA

Belgaum - Karnataka

Tender For supply of thinner f/enamel paint , two pack aliphatic acrylic polyurethane finish paint off white , zinc ethyl silicate primer is 14946: 2001 , two pack epoxy polyamide mio undercoat , enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 , ready mixed paint, air drying, red oxide - zinc phosphate, priming as per is 12744

Central Government/Public Sector

CTN :45072302

25 May, 2026 NA

Mumbai - Maharashtra

Tender For tender for supply of m-seal phataphat, fast curing epoxy compound, -detail specifications as per technical catalogue for material code 300014858 , detail specifications as per technical catalogue for material code 300020568 , detail specifications as per technical catalogue for material code 300020754 , detail specifications as per technical catalogue for material code 300020820 , detail specifications as per technical catalogue for material code 300023062 , detail specifications as per technical catalogue for material code 300032128 , detail specifications as per technical catalogue for material code 300078244 , detail specifications as per technical catalogue for material code 300078280 , detail specifications as per technical catalogue for material code 300078869 , detail specifications as per technical catalogue for material code 300079137 , detail specifications as per technical catalogue for material code 300122971 , detail specifications as per technical catalogue for material code 300122972 , detail specifications as per technical catalogue for material code 300122973

Central Government/Public Sector

CTN :45077852

04 Jun, 2026 NA

Rajkot - Gujarat

Tender For supply of various size of di- electrical safety shoes, electric shock resistant up to 30 kv as per attached specification. technical specification for art 9721w product: 30kv dielectric boot with steel toe. 1). size range : 5-11 2).type of construction vulcanized rubber upper and sole. 3).last/ sole pattern psv & vsv/ st 4).specialty tested individual boots at 30kv under wet condition 5).recommendation for working environment with high voltage hazards power station operations substation (step-up/ step-down/ distribution) operations electrical hazards with wet condition/ water exposure high current leakage hazards electrical installations. 6). compliance- astm f2413-18 m i/c eh european standard ce approved en iso 20345 :2011 (sb e fo hro sra) en 50321-1:2018 class 3 ac (for installations with nominal voltage up to 26500v a.c. sb = standard basic protection as per en iso 20345 e= heel energy absorption fo = fuel oil resistantoutsole hro = resistant to hot contact sra =slip resistance on ceramic tile with sodium lauryl sulphate csa z195-14 / astm f 2413-18 grade 1 toe protection compression resistance, 11kn 18 kv electric shock resistance (esr) protection. 7). dielectricfootwear* astm f1117-03(2013) (min 20,000vac) 8). lining material selected polyester grade lining comes with extra comfort and durability 9). upper construction leak-proof (electrically verified)reinforced rubber upper high visibility with orange and green contrast easy for cleaning. 10). sole / heel electrical shock resistant sole suitable for high voltage/ current environment slip resistant vulcanizedrubber outsole good abrasion resistant for extra durability heel energy absorption design tominimize the heel impact. 11). steel toe cap epoxy coated toe caps for anti-corrosion meets csa z195 impact andastm f2413 compression tests. 12). chemical resistance sole & upper - good resistant towards acids and alkalis 13). finishing lacquer coating for weather protection. 14). packing recyclable polybag & 6pairs in a carton. various sizes of electrical safety shoe as per requirement (size 6-11 as per attached chart) [ warranty period: 12 months after the date of delivery ]

State Government

CTN :44216446

16 May, 2026 NA

Mahisagar - Gujarat

Tender For corrigendum : supply of miscellaneous and consumable items for mmd/ws at khep - v belt d-238, v belt a-28, v belt c-105, rubber spider for love joy coupling size l-095, ci love joy coupling size l-095, 100 percent neoprene rubber sheet size 1 mtrx2 mtrx3 mm thick, 100 percent neoprene rubber sheet size 1 mtrx2 mtrx5 mm thick, anabond unadrobic adhesive & sealand no-610, fevi kwik tube 3 grams, m seal fast curing epoxy compound, each packet contains 50 grams of resin base and 50 grams of hardener ( 1 kg box contains 10 packets), belzona super metal, measure tape 5 meter, britelite 1200 meters long rang torch rechargeable led flashlight with charger, impact wrench power/battery operated, bearing puller , 12 inch , 3 legs, bearing puller , 8 inch , 3 legs, hydraulic bearing puller kit, make- skf, model no- tmma 75h/set, width of grip external 52-200 mm, effective arm length - 200 mm, withdrawal force- 75 kn, grease gun, bench vice size 4", bench vice size 8" (netco make), long nose plier, insulated with thick c.a. sleeve,generally confirming to is 3552-1989, product no:1430-6., circlip plier internal (bent nose),product no: 1442.7,capacity :19.6 mm, length:180 mm, taparia or jhalani or any equivalent make, combination plier ,185mm lenth, hand drill machine size 10mm, grinding stone (smooth) for 6"(dia.) bench grinder wolf., grinding stone (rough) for 6" bench grinder wolf, mini angle grinder 100 mm, grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36), ag-4 cutting wheel make:bosch, electrically operated portable cut off saw (for tube cutting), wheel size:355mm, arbour size: 25.4mm, scissors size: 10", wire brush with wooden handle size 50x150x300 mm, 3/4" polypropylene rope for normal mechanical work, manila rope, size: 16 mm dia, manila jute rope size 12 mm, ms nipple 1/2", nipple 3/4", nipple 1", ms nipple size 2", hss hacksaw blade size 300x12.5x0.63 mm, hss hacksaw blade size 12"x1/2"x24 tpi bipic, grits 150 emery cloth roll of 50mtr. length and 50mm width, emery paper smooth fine size 38 mm x 50 m length, portable welding machine, gas cutting torch cutogen esab make, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, flash back arrestor for cutting torch end mounted oxygen, flash back arrestor for cutting torch end mounted da, flash back arrestor for regulator mounted da cylinder.

CTN :44960039

06 May, 2026 14.26 Lacs

Bankura - West Bengal

Tender For corrigendum : supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , thinner for epoxy paints (bhel) (q3) , gum spirit of turpentine (oil of turpentine) conforming to is 533 (q3)

Central Government/Public Sector

CTN :45056752

25 May, 2026 NA

Vadodara - Gujarat

Tender For supply of various size of di- electrical safety shoes, electric shock resistant up to 30 kv as per attached specification. technical specification for art 9721w product: 30kv dielectric boot with steel toe. 1). size range : 6-9 2).type of construction vulcanized rubber upper and sole. 3).last/ sole pattern psv & vsv/ st 4).specialty tested individual boots at 30kv under wet condition 5).recommendation for working environment with high voltage hazards power station operations substation (step-up/ step-down/ distribution) operations electrical hazards with wet condition/ water exposure high current leakage hazardselectrical installations. 6). compliance- astm f2413-18 m i/c eh european standard ce approved ? en iso 20345 : 2011 (sb e fo hro sra) en 50321-1:2018 class 3 ac (for installations with nominal voltage up to 26500v a.c. sb = standard basic protection as per en iso 20345 e= heel energy absorption fo = fuel oil resistant outsole hro = resistant to hot contact sra =slip resistance on ceramic tile with sodium lauryl sulphate csa z195-14 / astm f 2413-18 grade 1 toe protection compression resistance, 11kn 18 kv electric shock resistance (esr) protection. 7). dielectric footwear* astm f1117-03(2013) (min 20,000vac) 8). lining material selected polyester grade lining comes with extra comfort and durability 9). upper construction leak-proof (electrically verified) reinforced rubber upper high visibility with orange and green contrast easy for cleaning. 10). sole / heel electrical shock resistant sole suitable for high voltage/ current environment slip resistant vulcanized rubber outsole good abrasion resistant for extra durability heel energy absorption design to minimize the heel impact. 11). steel toe cap epoxy coated toe caps for anti-corrosion meets csa z195 impact andastm f2413 compression tests. 12). chemical resistance sole & upper - good resistant towards acids and alkalis 13). finishing lacquer coating for weather protection. 14). packing recyclable polybag & 6pairs in a carton. various sizes of electrical safety shoe as per requirement (size 5-12) [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45035445

12 May, 2026 49.90 Lacs

Khorda - Odisha

Tender For supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , ready mixed paint, air drying, red oxide - zinc phosphate, priming as per is 12744 (q3) , thinner for epoxy paints (bhel) (q3)

Central Government/Public Sector

CTN :45038390

18 May, 2026 NA

Harnaut - Bihar

Tender For supply of lower spring beam arrangement to drg.no.t-0-5-667/col.i, alt -'k' and conforming to icf/md/specn.094 rev.00. the firm shall fulfill the requirements as per icf/md/specn.147 rev.02. with amendment no.1. finished items shall be packed in wooden crates to avoid paint damage during transit and machined surfaces to be rust proof oil coated and covered with bio degradable plastic sheets. the item should be coated with twocoats of high performance anti corrosion epoxy coating (two packs) green finishing tordso specn:m&c/ pcn/123/2018 rev.02. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45011676

29 Apr, 2026 NA

Chennai - Tamil Nadu

Tender For supply and application one coach set of exterior epoxy pu paints for spicaccoaches to drg.no.800-8-3-003, alt-nil as detailed below: 1.two component p.u.surfacer specn.rdso /m&c /pcn /100/2018, chapter-iv = 30 ltrs 2.pu thinner compatible with pu paint system offered -20 ltrs 3.thinner compatible for unsaturated polyster base knifing putty, pu surfacer and pu full gloss enamel finishing paint specn.rdso/m&c/pcn/100/2018, chapter-iii,iv & v. = 40 ltrs. 4.full gloss polyurethane enamel (two pack ) exterior finishing paint: specn. rdso/m&c/pcn/100/2018 chapter-v colour:coral red ral 3016(metallicfinish) = 30 ltr 5.full gloss polyurethane enamel (two pack) exterior finishing paint to specn. rdso/m&c/ pcn/100/2018 chapter-v colour :pu papyrus white,ral 9018(metal[ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45027043

01 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply and application one coach set of exterior epoxy pu paints for spicaccoaches to drg.no.800-8-3-003, alt-nil as detailed below: 1.two component p.u.surfacer specn.rdso /m&c /pcn /100/2018, chapter-iv = 30 ltrs 2.pu thinner compatible with pu paint system offered -20 ltrs 3.thinner compatible for unsaturated polyster base knifing putty, pu surfacer and pu full gloss enamel finishing paint specn.rdso/m&c/pcn/100/2018, chapter-iii,iv & v. = 40 ltrs. 4.full gloss polyurethane enamel (two pack ) exterior finishing paint: specn. rdso/m&c/pcn/100/2018 chapter-v colour:coral red ral 3016(metallicfinish) = 30 ltrs 5.full gloss polyurethane enamel (two pack) exterior finishing paint to specn. rdso/m&c/ pcn/100/2018 chapter-v colour :pu papyrus white , ral 9018(metallicfinish) = 80 ltrs [ warranty period: 30 months after the date of delivery ]

Epoxy Compound Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors