Get complete information related to latest Epoxy Compound Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Epoxy Compound Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Epoxy Compound Tenders.
Tender For supply of pu painting kit of lhb shatabdi and other coaches ,consists of seven items. 1:- thermal barrier high build epoxy ( two pack ) to chapter-iv of rdso spec. m&c/pcn/100/2024, qty.45 ltrs. 2:- epoxybased putty colour white ( two pack ) to chapter-iii of rdso spec. m&c/pcn/100/2024, qty.10 kgs. 3:- heat reflective & thermal barrier full gloss pu enamel top coat grey ( two pack ) colour shade ral-ds 2406005 to chapter-v of rdso spec. m&c/pcn/100/2024, qty.60 ltrs. 4:- heat reflective & thermal barrier full gloss pu enamel top coat blue ( two pack ) colour shade ral-ds 2606035 to chapter-v of rdso spec. m&c/pcn/100/2024, qty.35 ltrs. 5:- thinner compatible heat reflective & thermal barrier full gloss pu enamel to chapter-v of rdso spec. m&c/pcn/100/2024, qty.65 ltrs. 6:- epoxy thinner compatible to thermal barrier high build epoxy ( two pack ) to chapter-iv of rdso spec. m&c/pcn/100/2024, qty.30 ltrs. 7:- epoxy based zinc phosphate primer ( two pack ) to chapter-ii of rdso spec. m&c/pcn/100/2024, qty.02 ltrs.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ]
Tender For bid to ras corrigendum : supply of pu paint to shade is 631 as per spec tre 165 , matching pu thinner for item 1 , pu paint to shade is 632 as per spec tre 165 , matching pu thinner for item 3 , pu paint to shade ral 5012 as per spec tre 165 , matching pu thinner for item 5 , pu paint to shade ral 7035 as per spec tre 165 , matching pu thinner for item 7 , white epoxy paint as per spec tre 168 , matching epoxy thinner for item 9 , epoxy primer as per spec tre 166 , matching epoxy thinner for item 11 , mio as per spec tre 167 , matching thinner for item 13 , pu paint to shade is 697 as per spec tre 165 , matching pu thinner for item 17
Tender For procurement of hull item epoxy deck flooring material - deco chips trazino farbchips marmorflocken , tefro floor ep coating , tefrotex sf primer ral 1014 , tefroka ep pu decosealer , tefroka ep pu sealer thix
Tender For supply of epoxycompound for general purpose.ts as undertype =two component consisting resin & hardner.mixing ratio =resin & hardner 1:1 vol.viscosity of resin =putty consistency.viscosity of hardner =putty consistency.mixing time =2-3 minutes.physical state of mixed mass =fine smooth putty consistency.curing time =30/40 minutes at 30 degree c.hardness =70-80 shores
Tender For supply of epoxy based adhesive similar to araldite/jointite/superex/fevitite or similar consisting of epoxy resin 100 gms & hardner 80 gms packed in seperate tubes, total 180 gms.in a packet.(shelf life of this item is 12 months)
Tender For lws shell complete (a) one coach set of roof, 2 mm sidewall and end wall 1) roof assembly to drg no 58116032, alt 'l'- 1 no. welding pin to be assembled as per drg no 58110037, alt 'nil' (with latest sub drawing49516008, alt "a") 2) end roof assembly to drg no 58116066, alt "g"- 2 nos. 3) sidewall to drg no 75214023,alt "nil"- 1 no. 3mm thick to rdso spec. c k-201 x2crni12 sheet to be used for manufacturing sidewall sheet instead of 2mm sheet. 4) end wall to drg no 74115001, alt "h"- 2 nos. (b) partition frames & body shell items and floor supports 1) 75210012, alt "nil"- 1 no. 2) 75210002, alt "nil"- 1 no. 3) 58210036, alt "a"- 2 nos. 4) 75210003, alt"nil"- 1 no. 5) 67010011, alt "a"- 2 nos. 6) aaa10488, alt "c"- 6 nos. 7) 58110017, alt "b"- 2 nos. 8) 58110015, alt "a"- 6 nos. 9) 58110016, alt "a"- 3 nos. 10)aab10338, alt "nil"- 16 nos. (c) under frame complete to drg.no.67011001, alt 'n'- 1 no. the firm shall fulfill the manufacturing requirement of icf/md/spec-451, issue status-01, rev-01. assembly of (a), (b) and (c) shall be done as per drg no. 75210001, alt 'b' (d) installationitems 1) body side entrance door installation as per drg no. -58152001, alt "b" -1 no. 2) foot step complete to drg no. 58124004 alt "nil"-6 nos. 3) exterior garniture to drg no. 59326001 col-i alt "h" -1no. 4) application of epoxy coating. 46590003 col-1 alt "d" -1 no. 5) roof ventilator assly -01873401 col-i alt"r" - 7 nos. 6) coupler mounting -46021001 col-i alt "e" (aar h coupler to pl no. 33549771 -2 nos and anti-rotational channel to pl no.-33544402 -1 no as free supply). for installation items (d) general installation drg no. 75290002, alt 'id' to be followed. special condition : suitable packing should be done to prevent damage during transit and unloading. installation required as per assy.drg.& annexure-a, dtd 13-09-2023 to be followed. supply rates and installation rates to be quoted separately. [safety item ]
Tender For lwscn shell complete (a) one coach set of roof, 2 mm side wall and end wall for lscn coaches 1) roof assembly to drg no 58216001, alt 'n'- 1 no. welding pin to be assembled as per drg no 58210045 alt 'nil' (with latest sub drawing 49516008, alt 'a') 2) end roof assembly to drg no 58116066, alt 'g'- 2 nos. 3) location of sidewall to drg no 75314013, alt 'nil'- 1 no, 3mm thick to rdso spec-ck201 x2crni12 sheet to be used for manufacturing side wall sheet instead of 2mm sheet. 4) end wall to drg no 74115001, alt 'h'- 2 nos. (b) body shell items.1) 58210036, alt 'a' - 2 nos. 2) 75310003, alt nil - 1 no. 3) 67010011, alt 'a' - 2 nos. 4) aaa10488, alt 'c' - 4 nos. 5) 58110017, alt 'b' - 2 nos. 6) 58110015, alt 'a' - 3 nos. 7) 58110016, alt 'a' - 6 nos. 8) aab10338, alt nil- 16 nos. (c) under frame complete to drg no 73911001 alt 'j' - 1 no. assembly of (a), (b) and (c) shall be done as per drg no.75310001 alt 'b' (d) installation items 1) body side entrance door installation as per drg no.58252001 alt 'a' -1 no. 2) foot step complete to drg no. 58124004 alt nil - 4 nos. 3) exterior garniture to drg no. 59326001 col-i alt 'h' -1 nos. 4) application of epoxy coating. 46590003 col-1 alt 'd' -1 nos. 5) roof ventilator assly -01873401 col-i alt 'r' - 7 nos. 6) coupler mounting -46021001, col-i alt 'e'(aar h coupler to pl no. 33549771 - 2 nos and anti-rotational channel to pl no.-33544402 -1 no as free supply). for installation items (d) general installation drg no. 75390002 alt 'ic' may be followed. the firm shall fulfill the requiremnt as per as per icf/md/spec-451, issue status-01 rev.00. special condition : - suitable packing should be done to prevent damage during transit and unloading. - installation required as per assy.drg.& annexure-a, dtd 13-09-2023 to be followed. - supply rates and installation rates to be quoted separately. [safety item ]
Tender For supply, installation, testing and commissioning of extra material for installation of unitary acs in different departments /centers/schools, office etc. at iit kharagpur, kharagpur (phase i). - "supply, installation, testing and commissioning including vaccumization and nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for split ac system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with xple class-o tubular insulation/with class-o closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for suction and liquid lines, all accessories as per specifications etc. as required :note: wall opening and making good to the damages.", "6.4 mm (¼"") dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "9.5 mm (⅜"")dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "12.7 mm (½"") dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "15.86 mm ( ⅝"") dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "19 mm (¾"")dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", interconnection electrical copper cables from indoor , outdoor & electrical control panel complete with 4 core 2.5 sqmm copper frls insulated cable(isi marked) with cable tie & clamp etc as required., supply & installation m.s epoxy painted fabricated stand for different size condensing unit with vibration isolators, grouting, for complete platform type stand for outdoor unit having safety railing etc as per site requirement., supply & installation of upvc drain pipe (isi marked) with 6mm thick nitrile rubber insulation from idu - 25mm dia, 40 mm rigid upvc drain pipe (isi marked) with 6 mm thick nitrile rubber insulation complete with fittings, u traps etc. & as specified to the nearest toilet with required civil works & finishing the same., supply of r-22 gas for top up, supply of r-32 gas for top up, supply & installation of good quality wooden frame (2" x 2") thick required for window ac installation, supply & installation of 16amps plug top (isi marked), supply & installation of 100mm pvc trunking with snap on trunking (isi marked), "supplying and installing following size of perforated hot dipped galvanised iron cable tray with cover (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended fromthe ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.", 100 mm width x 50 mm depth x 1.6 mm thickness, 225 mm width x 50 mm depth x 1.6 mm thickness, 300 mm width x 50 mm depth x 1.6 mm thickness, installation, testing & commissioning of the window ,split acs ,cassette ac supplied by department. price shall be inclusive of installtion upto 3mtr of refrigerant pipe, drain pipe and cable., window acs, split acs, cassette acs, tower acs, reinstallation, lifting, shifting of existing ac units (split & window acs & cassette ac)., window acs, split acs, cassette acs, tower acs, dismantling of existing ac (split ac / window ac) units including all copper pipes, drain pipes mounting surfaces, etc. complete and keeping the premises clear of all and shifting to rac work shop, dismantling of existing ac (cassette ac) units including all copper pipes, drain pipes mounting surfaces, etc. complete and keeping the premises clear of all and shifting to rac work shop, dismantling of existing ac (tower ac) units including all copper pipes, drain pipes mounting surfaces, etc. complete and keeping the premises clear of all and shifting to rac work shop, buy-back of existing unserviceable ac (split ac / window ac/cassette ac) units(all type) including all copper pipes, drain pipes mounting surfaces, etc. complete. the item shall be quoted as negat