Latest epoxy plaster Tenders | Government epoxy plaster Tenders

Central Government/Public Sector

CTN :45527970

03 Jul, 2026 NA

Mandi - Himachal Pradesh

Tender For supply of spin coating system

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

CTN :45514210

14 Aug, 2026 NA

Bangalore - Karnataka

Tender For expression of interest for large area thin film coating system (latcs)

State Government

CTN :45510466

25 Jun, 2026 NA

Silvassa - Gujarat

Tender For providing and installing gymnasium equipment at opp. sainik school, mota randha, d&nh. - pec dec flyfeatures:* continuous welded, factory assembled weight frame.* fiberglass reinforced nylon pulleys.* industrially rated, sealed bearings at all pivot points.* 3 gauge steel connecting plates.* .50 dia. connecting bolts* extended handle provides multiple gripping positions.* adjustable seat.standard weight stack - includes a 210 lb. weight stack with a 310 lb. weight stack option.product weight - 503lb / 228.16kgmainframe - 11 gauge 2.375 x 4.625 oval tubingcables - fiberglass reinforced nylon pulleys.upholstery - durafirm upholstery over 2 high density foamdimensions - 34"w x 57"l x 69"h (86cm x 145cm x 173cm), lat pull down + rowingfeatures:* dual-function design: enables both lat pull-down and vertical row exercises in one machine.* continuous welded, factory assembled weight frame.* fiberglass reinforced nylon pulleys.* industrially rated, sealed bearings at all pivot points.* 3 gauge steel connecting plates.* adjustable seat & leg hold downsstandard weight stack - 2:1 weight ratio with a 210 lb. weight stack provides 420 lbs. of resistance. also available in a 310 lb. weight stack.product weight - 549lb / 249.03kgmainframe - 11 gauge 2.375" x 4.625" oval tubing,cables - 5.5mm dia., 2500lb rated aircraft cable.upholstery - durafirm" upholstery with over 2" high density foamdimensions: 41 w x 78 l x 77 h (104cm x 199cm x 196cm), leg curl/leg extensionfeatures:* continuous welded, factory assembled weight frame.* fiberglass reinforced nylon pulleys.* industrially rated, sealed bearings at all pivot points.* 3 gauge steel connecting plates.* adjustable seat back and leg rollersstandard weight stack - includes a 210 lb. weight stack with a 310 lb. weight stack option.product weight - 505lb / 229.07kgmainframe - 11 gauge 2.375" x 4.625" oval tubing,cables - 5.5mm dia., 2500lb rated aircraft cable.upholstery - durafirm" upholstery with over 2" high density foamdimensions: 53 w x 40 l x 62 h (135cm x 102cm x 158cm), dip/chin assist*dual-function design: supports both weight-assisted chin-ups (pull-ups) and dips in one machine.*adjustable weight assistance: allows users to select assistance level based on strength and training goals.*heavy-duty commercial frame: built with high-quality steel for durability in high-traffic gym environments.*smooth counterbalanced system: ensures fluid, controlled motion throughout the exercise range.*ergonomic multi-grip handles: provide varied grip options for targeted upper-body training.*non-slip knee platform: offers secure support and comfort during assisted exercises.*premium upholstery & finish: durable padding and corrosion-resistant coating for long-term usesize: 58 x 46 x 85 inchesweight stack: 80kg, wrist curl machinesize: 18" x 34" x 39.37" weight stack: 100kg, preacher curl bench*ergonomic design: the bench is designed to support the user in a seated position, allowing for proper alignment and reducing the risk of injury.*adjustable components: features adjustable arm pads and seat height to accommodate users of various sizes, ensuring comfort and effectiveness during workouts.*durable construction: built with high-quality materials to withstand heavy use in both commercial and home gym settings.*compact footprint: designed to fit into smaller workout spaces without compromising on performance.size: 36" x 36" x 37", adjustable bench6-position ladder-style back pad adjustmentdimension: 59" length x 27" width x 22" height, simple flat bench, dumbbell rackholds one (1) pair each of 5-50 lb. hex dumbbells.30"h x 20"l x 40"wheavy duty 12-gauge steel construction, plate tree, functional trainersize: 80.8" x 55.3" x 24" weight stack both side: 150kg2:1 pulley ratio for smooth resistance32 adjustable cable positions81" cable travel lengthpremium aluminum pulleys for ultra-smooth motionintegrated multi-grip pull-up barband pegs for added resistance trainingbuilt-in pegboard storage sys

Central Government/Public Sector

CTN :45487050

15 Jun, 2026 NA

Dhanbad - Jharkhand

Tender For supply of heavy duty steel almirah for rpf barracks with details specification as - (1)item name-heavy duty steel almirah for rpf barracks.(2) applicable standard is: 3312:2021 for steel wardrobes/cabinets/lockers. (3) material crca steel sheet conforming to is 513 (part-1):2016. (4) type of constructionwelded construction, (5) installation type free standing, (6) number of doors-02 nos. (7) door type hinged type, (8) locking arrangement 3-way locking system with built-in handle and locking arrangement, (9) internal locker one internal locker with separate lock, (10) number of shelves minimum 04 adjustable shelves, (11) hanging arrangement one hanging rod for uniforms/clothes, (12) ventilation ventilation louvers on both sides, finish epoxy polyester powder coated finish, (14) colour grey / olive green / as approved by consignee, (15) height 1980 mm plus minus 20 mm, (16) width 900 mm plus minus 20 mm, (17) depth 480 -500 mm, (18) thickness of side sheet minimum 1.0 mm, (19) thickness of back sheet minimum 1.0 mm, (20)thickness of top & bottom minimum 1.0 mm, (21) thickness of door sheet minimum 0.9 mm, (22) thickness of shelf minimum 0.9 mm, (23) thickness of stiffeners minimum 1.0 mm, (24) hinges heavy duty ms hinges, (25) shelf load capacity minimum 40-50 kg udl per shelf, (26) surface treatment anti-rust chemical treatment before powder coating, (27) powder coating thickness minimum 40-50 microns, (28) workmanship smooth finish, proper welding, no sharp edges/burrs, (29) keys 02 duplicate keys per almirah, (30) marking manufacturer name, month/year of manufacture, (31) warranty as per irs terms and condition,(32) inspection by consignee/railway representative, (33) packing suitable packing to avoid transit damage, (34)delivery at rpf barrack/consignee store [ warranty period: 30 months after the date of delivery ]]

Central Government/Public Sector

CTN :45492829

01 Jul, 2026 NA

Subansiri - Arunachal Pradesh

Tender For supply of vrf or vrv air cooled outdoor units suitable for cooling or heating having 100 percent hermetically sealed inverter type twin rotary or scroll compressor capacity of machines 14 hp to 22 hp , following minimum capacity 4 way vrv or vrf cassette type indoor ceiling mounted unit equipped with synthetic washable media pre filter,3 point 2 tr , following minimum capacity 4 way vrv or vrf cassette type indoor ceiling mounted unit equipped with synthetic washable media pre filter,4 tr , vaccumiazation and nitrogen testing of following nominal sizes of soft or hard drawn copper refrigerant piping for vrv or vrf system, thickness 1 point 2 mm , 9 point 5 mm dia od soft drawn with tube thickness 1 point 2 mm , 12point 7 mm dia od soft drawn with tube thickness 1point 2 mm , 15 point 86 mm dia od soft drawn with tube thickness 1point 2 mm , 19 mm dia od hard drawn with tube thickness 1 point 2 mm , 22 point 2 mm dia od hard drawn with tube thickness 1 point 2 mm , 25 point 4 mm dia od hard drawn with tube thickness 1 point 2 mm , 28 point 58 mm dia od hard drawn with tube thickness 1 point 2 mm , 34 point 9 mm dia od hard drawn with tube thickness 1 point 62 mm , 41 point 27 mm dia od hard drawn with tube thickness 1 point 62 mm , s i t c of y joints kit refrnet , drain piping rigid pvc piping complete with fittings supports as per specifications and insulated with 6mm thick closed cell elastometric nitrile rubber insulation 25mm dia and , 32 mm dia , 40mm dia , control and transmission wiring , testing and commissioning of vrf or vrv systems including topping of r410a gas as per site requirements , supply and installation of u or v protection of used copper pipe at outer site for odu connection site , 6way load bank double door enclosure confirming to is 8623 iec 60439 g frame panel boards , supplying and fixing of following sizes of medium class pvc conduit along with accessories 25mm , frlsh or hffr pvc insulated copper conductor single core cable in the existing surface or recessed steel or pvc conduit as required 3 x 1 point 5 sq mm , suitable size gi box with modular plate and cover in front on surface or in recess , one number xlpe insulated and pvc sheathed copper conductor armoured power cable of 1 point 1 kv grade 4 x 16 sqmm , 16 a rating 240 by 415 v 10 ka c curve miniature circuit breaker suitable for nductive load of following poles in the existing mcb db complete with connections single pole , single pole and neutral sheet steel mcb distribution board 240 v on surface by recess complete 12 way double door , supplying and fixing 25 a rating single pole and neutral , following size of perforated painted with powder coating m s cable trays 150 mm width x 50 mm depth x 1point 6 mm thickness , earthing with g i earth pipe 4 point 5 metre long 40 mm dia including accessories , providing and laying earth connection from earth electrode , providing and fixing 6 swg dia g i wire on surface or in recess for loop earthing , amc as per section c , installation of cassette ac 2 ton 5 star , copper pipe , 4 core copper wire , drain pipe with insulation , odu stand , cable tray , hanging rod , faster nut , wrapping tape , 3 core copper wire

CTN :45493019

23 Jun, 2026 NA

Panchkula - Haryana

Tender For supply of coronary guidewire 0 point 014 stainless steel core wire hydrophilic coated 300 cm floppy moderate and extra support floppy exchange length , 0 point 014 ptca wire with inner coat technology 6cm 20cm polymer jacket with slip coat hydrophilic coated with tip load 0 point 8gm 1 point 2gm , 0 point 014 ptca wire polymer jacket wire hudrophilic coated with tapered tip tip load 0 point 8gm 1 point 5gm , 0 point 014 ptca wire single core hydrophilic coated extra support with sion tech technology with tipload 0 point 5gm eg point sion blue , 0 point 014 one piece core with jointless spring coil siontech having composite core with actone inside length 20 cm with tip load 0 point 5 g 180 cm length tip radiopacity 3 cm , specialized ptca guide for retrograde approach and cto 0 point 12 inch one piece core wire with joint less spring less spring coil with sion , inoue percutaneous transvenous mitral commissurotomy balloon complete with accessories - assorted sizes , iabp balloon size point 40cm compactable with arrow , iabp balloon 35cm compactable with arrow iabp machine point , iabp balloon size point 30cm compactable with arrow , drug eluted balloon with paclitaxel dia 1 point 5 to 4 point 5mm with various length upto 40mm catheter , rapid exchange thrombus aspiration catheter system , non compliant coronary balloon 3 point 0 mm assorted size , non compliant coronary balloon 3 point 5 mm assorted size , usfda pmda eu-ce medical bis approved nc balloon catheter with integrated shaft system having soft tapered tip design with super hydrophilic coating 2 point 75 x assorted sizes , usfda pmda eu-ce medical bis approved nc balloon catheter with integrated shaft system having soft tapered tip design with super hyddrophilic coating point 4 point 0 x assorted sizes , radiation gloves , coronary orbital atherectomy system with glide assist accessory , usfda pmda eu-ce bis approved pull push hemostasis valve kit , sterile gauze with radiopaque marker box of 100 gauze piece

CTN :45499245

24 Jun, 2026 NA

Panchkula - Haryana

Tender For supply of cruciate retaining total knee prosthesis cemented hypoallergic coating consisting of 1 cr femoral component with surface coating , cruciate retaining fixed bearing modular knee replacement prosthesis cemented consisting of 1 cobalt chromium cr femoral component , cruciate retaining total knee prosthesis cemented with tibial stem extension consisting of 1 co-cr cr femoral component 2 articular insert , high performance posterior stabilized total knee prosthesis cemented consisting of 1 ps femoral component 2 ps articular insert 3 tibial base plate , reverse shoulder replacement system consisting of 1 humeral stem - uncemented ha porous coated stem 2 modular polyethylene humeral , mobile bearing unicondylar knee system with 1 co-cr femoral component 2 mobile bearing congruent poly insert 3 tibial traycocr titanium , uncemented thr ceramic on ceramic prosthesis consisting of 1 uncemented fully porous coated acetabular cup option of no holes or cluster holes , uncemented thr prosthesis metal on xlpe consisting of 1 uncemented fully porous coated acetabular cup option of cluster screw holes or no , fixed bearing unicondylar knee system with 1 co-cr femoral component 2 fixed bearing poly insert 3 titanium co-cr tibialtray different compatible sizes , cruciate retaining total knee prosthesis medial pivot consisting of 1 co-cr cr femoral component 2 mobile bearing medial pivot articular inser , posterior stabilized modular knee replacement prosthesis cemented - medial pivot consisting of 1 cobalt chromium ps femoral component sert , bone cement antibiotic loaded 40gm , posterior stabilized total knee prosthesis cemented hypoallergic coating consisting of 1 ps femoral component with surface coating 2 ps articular i , radio frequency probe 3 5 to 4 5 mm electrode 45 or 90 degrees with integrated hand piece and cable pre sterilised and with outlet for suction , all inside meniscal repair implant system

Central Government/Public Sector

CTN :45250598

16 Jun, 2026 NA

Koraput - Odisha

Tender For corrigendum : supply of air intake duct and stone guard system work as per edt- 2871 , thrust stand and engine mounting area work as per edt-2871 , maintenance platform work as per edt-2871 , exhaust detuner work as per edt-2871 , locking and clamping as per edt-2871 , miscellaneous work as per edt- 2871 , protective coating as per edt-2871 , spares of critical system as per edt-2871 , supply of components and spares as per edt-2871

CTN :45477719

22 Jun, 2026 74.0 Thousand

Thanjavur - Tamil Nadu

Tender For supply of civil lab items - lab items, auger boring apparatus (motorized) * engine type: 4-stroke, air-cooled, single-cylinder petrol engine * displacement: 196 cc * power output: minimum 6.5 7 hp ( 3.5 kw) * maximum engine speed: ~3600 4000 rpm * starting system: recoil (manual) start * fuel type: pure petrol * fuel tank capacity: minimum 1.5 1.6 l * supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) * bit material: heavy-duty mild steel with powder coating * typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) * bit coupling: quick-coupling system for easy bit replacements * frame: robust tubular steel frame with ergonomic handles and vibration absorbers * weight: minimum 20 22 kg (without auger bit) "6" auger driled"

Epoxy Plaster Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector