Latest epoxy resin Tenders | Government epoxy resin Tenders

Central Government/Public Sector

CTN :40217340

24 May, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of epoxy polyamide red oxide zinc phosphate primer for penstock as per specification 42380420901. , chlorinated rubber mio undercoat for penstock as per specification 42380420901 , chlorinated rubber top coat paint for penstock as per specification 42380420901. , coal tar paint for penstock. product no. tarstil tar gr. -b. isi code - is: 290/1961 type-b. as per sp

Central Government/Public Sector

CTN :40217555

13 May, 2025 NA

Haridwar - Uttarakhand

Tender For supply of hw2171599103 epoxy resin treated nomex paper

Central Government/Public Sector

CTN :40217753

13 May, 2025 NA

Haridwar - Uttarakhand

Tender For supply of epoxy resin - cy205 (hw2780071001)

Central Government/Public Sector

CTN :40210458

19 Jun, 2025 NA

Jodhpur - Rajasthan

Tender For supply of pu painting kit for apricoat yellow and blood red pu paints consists of 07 item 1:-epoxy zink phosphate primer ( two pack ) to chapter ii of rdso spec. no. m&c/pcn/100/2018 amndt. 1b. qty. per kit 52 ltrs. 2:- unsaturated polyester based knifing putty colour white ( two pack ) chapter iii of rdso spec. no. m&c/pcn/100/2018 amndt. 1b. qty. per kit 40 kgs. 3:- pu surface white ( two pack ) chapter iv of rds o spec. no. m&c/pcn/100/2018 amndt. 1b. qty. per kit 34 ltrs. 4:- pu paint beige finish ( two pack ) colou r shade ral 0708040 to chapter v of rdso spec. no. m&c/pcn/100/2018 amndt. 1b. qty. per kit 44 ltrs. 5:-pu paint maroon finish ( two pack ) colour shade ral 0303045 to chapter v of rdso spec. no. m&c/pc n/100/2018 amndt. 1b. qty. per kit 05 ltrs. 6:-thinner compatible with pu paint. qty. per kit 50 ltrs. 7:-t hinner for epoxy paint compatible with epoxy primer & putty. qty. per kit 20 ltrs. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Central Government/Public Sector

CTN :40211224

12 May, 2025 4.49 Lacs

Medak-T - Telangana

Tender For supply of polyurethane top coat-dtd5580a (is-694) , polyurethane thinner-dtd5580a , epoxy primer-dtd 5567a , epoxy thinner-dtd 5567a

Central Government And Public Sector

CTN :40211295

24 May, 2025 NA

Chittorgarh - Rajasthan

Tender For tender for supply of / 9 9 % % anti corrosion or erosion putty - supply of high build anticorrosive immersion grade epoxy putty-coating make- itw devcon - belzona - henkle - stanvac chemical india ltd as per detail technical specification enclosed , supply of primer for item no 1 high build anticorrosive immersion grade epoxy coating- putty make- itw devcon - belzona - henkle - stanvac chemical india ltd as per detail technical specification enclosed , supply of high performance brushable ceramic metal surface putty-coating make- itw devcon - belzona - henkle - stanvac chemical india ltd to protect metal from erosion- pitting- cavitation as per detail technical specification enclosed , supply of wear resistant ceramic- metal rebuild putty of make- itw devcon - belzona - henkle - stanvac chemical india ltd for repair wear parts- pitting as per detail technical specification enclosed , application of item no. 1 item no. 2 item no. 3and item no. 4 on pump column pipes surfaces- equipments including cleaning the surface of all dirt , dust , rust and other foreign matter by mechanical cleaning and grit blasting as per detail procedure enclosed

Corporations And Associations And Others

CTN :40200555

13 May, 2025 48.62 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipments under mplads funds for various locations of parks in municipal corporation of delhi - supply & installation of open gym equipments under mplads funds for various locations of parks in municipal corporation of delhi, seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size), seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for a

CTN :40190364

14 May, 2025 15.62 Lacs

Nellore - Andhra Pradesh

Tender For labour charges for surface preparation, application of primer, application of epoxy paint for various lines, tanks etc., available at different locations & elevations in cam division/sdstps including required consumables like wire brushes, rust cleaner, primer & thinner as required etc., and excluding paint. during the year 2025-26(1st phase 6months). paint shall be supplied by the department at free of cost.

Central Government/Public Sector

CTN :40181593

12 May, 2025 NA

Hisar - Haryana

Tender For supply of set of fluoropolymer paints for painting of fiat bogies as per annexure a. s pecification i.e for primer rdso specification no. m&c/pcn/123/2018, for intermediate coa t as per japanese industrial standard jis k 5659:2008, for top coat as per jis k 5659:2008, thinner compatible for epoxy paint spec rdso/m&c/pcn/123/2018, thinner compatible to intermedi ate and topcoat. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40187700

21 May, 2025 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of f epoxy paints and thinners - transpoxy primer 1.16 red color make- growel , pentadur xl cte 8518 black color make- growel , transpoxy barrier 216 black color make- growel , epoxy thinners - 15 percentage 6.03 make- growel , growel thinners- 15 percentage145 make- growel

Epoxy Resin Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors