Latest face milling Tenders | Government face milling Tenders

Central Government/Public Sector

CTN :45708376

18 Jul, 2026 NA

Dankuni - West Bengal

Tender For corrigendum : supply of side and face milling cutter to suit insert no. aomt170508peer-h acp 300 and insert screw as per following specification: (i) two number side and face milling cutter with cutting dia- 100 mm, arbor bore dia- 32 mm, no.of flute= 8-10, (ii) two compatible screw driver with 20 compatible screws. make/ brand: motherson(sumitomo)/sandvik/motherson/dormer pramet or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45716595

13 Jul, 2026 4.50 Lacs

Najibabad - Uttar Pradesh

Tender For supply of fabrication c c - damaged washing pipeline nipple flange band on pan no 6 3 , replace damaged washing pipeline nipple flange band on pan no 6 4 , install valve in steam line at pan no 2 550 mm 1 , install valve in steam line at pan no 2 550 mm 2 , install valve in steam line at pan no 2 550 mm 3 , install valve in steam line at pan no 2 550 mm 4 , replace nipple and band of a heavy tank 2 , replace nipple and band of a heavy tank 3 , replace nipple and band of a heavy tank 4 , remove clean and reinstall 4inch size syrup line on pan , cut and remove syrup header and fabricate and install new header , replacing the 6inch size glycol washing line fitted on pan no 1 , replacing nipples of different lines of pan no 6 1 , replacing nipples of different lines of pan no 6 2 , replacing nipples of different lines of pan no 6 3 , replacing nipples of different lines of pan no 6 4 , replacing 10inch size nipples of cut off line of pan no 6 1 , replacing 10inch size nipples of cut off line of pan no 6 2 , replacing 10inch size nipples of cut off line of pan no 6 3 , replacing 10inch size nipples of cut off line of pan no 6 4 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 1 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 2 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 3 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 4 , fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial , dismantling weak condensate bottle of old set , replacing weak pipeline flange valve and band of old set vertical juice heater 1 , replacing weak pipeline flange valve and band of old set vertical juice heater 2 , replacing weak pipeline flange valve and band of old set vertical juice heater 3 , replacing weak pipeline flange valve and band of old set vertical juice heater 4 , replacing weak pipeline flange valve and band of old set vertical juice heater 5 , replacing weak pipeline of old quad set no 4 1 , replacing weak pipeline of old quad set no 4 2 , replacing weak pipeline of old quad set no 4 3 , replacing weak pipeline of old quad set no 4 4 , replacing weak pipeline of old quad set no 4 5 , dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it , cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same , fitting water line from overhead to service tank 1 , fitting water line from overhead to service tank 2 , details of work of canti machine no 6 and 7 1 , details of work of canti machine no 6 and 7 2 , details of work of canti machine no 6 and 7 3 , details of work with new pipes from s sugarbin 1 , details of work with new pipes from s sugarbin 2 , details of work with new pipes from s sugarbin 3 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 1 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 2 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 3 , work on hot water line of brown sugar magma 1 , work on hot water line of brown sugar magma 2 , work on hot water line of brown sugar magma 3 , work on hot water line of brown sugar magma 4 , cutting and removing damaged monitor casing and ribs , cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate , dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections , dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick //bid details 2 / 117 / / 1 1 /item category plate and depositing scrap in scrap yard , dismantling damaged plate of sugar discharge chute from sugar elevator to sugar grader and fabricating and fitting new pl

Central Government/Public Sector

CTN :45163125

23 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For bid to ras bid to ras corrigendum : supply of carbide insert r245-t3m-pm sandvik make or semt 12t3agsn-jh mitsubishi make or sept 13t3agengd kennametal make or other equivalent insert , shim suitable for existing face milling cutter r245 160q40-18m of sandvik make. , shim screw suitable for existing face milling cutter r245-160q40-18m of sandvik make. , insert screw suitable for existing face milling cutter r245-160q40-18m of sandvik make. , carbide inserts sekn 1203. cvd - pvd-coated for medium machining of stainless steel material, iso application range m35 min. , ceramic insert cnga 120408.insert must be coated with tin pvd coated aluminium oxide and titanium carbide tin coated al2o3 plus tic for machining of hardened steel material having hardness 52-58hrc.

CTN :45618427

10 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For face milling cutter dia 63 mm x bore dia 22 mm x oal 40 mm, no of insert pocket minimum 05 nos, ap ma , insert with 4 cutting edge for face milling cutter, insert length minimum 13 mm x width minimum 4 mm

CTN :45614057

02 Jul, 2026 NA

Doiwala - Uttarakhand

Tender For supply of printing articles - sugar cane weighment trollypurchi on centurimake computer printing paperhaving size 10”x12”x2(part-2) original in redcolour and duplicate ingreencolour, four purchi will be printed on one sheetstrictly, with carbon as per our specimen, sugar cane weighment trollypurchi on centurimake computer printing paperhaving size 10”x12”x2(part-2) original in blue colour and duplicate in greencolour, four purchi will be printed on one sheetstrictly, with carbon as per our specimen, "sugar cane weighment purchi book for early varity containing 50 slips/purchi in each book in quadru- plicate i.e.200 purchi/leaves in each book in four different paper i.e. original – light green, duplicate-white, triplicate – yellow colour paper and quadruplicate – pink paper respectively. markedoriginal-for payment, duplicate groewrs, triplicate-for mill record and quadruplicate – for society (allprinted and perforated) correct/proper perforating must be done by perforating machine. the number should be printed automatically along with printed matters. size of book 7”x4.5”.it should not be dec-reased after binding/perforating. the book should be printed in vertical shape. the book will be printed 31 centers and the name of the center for a whichbookare meant, will be printed as per annexure – a enclosed. printing of above book will be made by making bock only. the particular center will be printed through letter press by composing. (as per our specimen) as per list.", summery of rules (both side printed having) size16”x 12” as per sample, shift wise crushing repot (10 am to 10 am) containing 50 leaves in each pad on white paper having size- 10”x7”., inspection pad containing 50 leaves in each pad on white rice paper having size 7” x 13” all perforated, weigh bridge checking register containing 30 leaves in i each pad on white paper having size 12” x 7.5” both side and both side gatta binding., daily cane indent pad containing 100 leaves in i each pad on white paper having size 8” x 6” for following society the pad will be printed as per our specimens, doiwala, dehradun, jawalapur, iqbalpur(roorkee), ponta valley, ponta sakumbari, laksar, appendix.iiibook containing 100 leaves in each pad on white paper having size- 12”x7.5”., authority pad containing 100 leaves in each pad on white paper having size- 10”x7.5”., nomination pad comtaining containing 100 leaves in each pad on white paper having size- 6”x 8”., token receipt ledger containing 220 page in each,ledger on ledger paper having size 12x8” serially numbered and canvas binding., licence for empployee pad containing 100 leaves in each pad on white paper having size 6"x8", engineering department mill house log book containing 180 folio in each ledger on ledger paper having size 20” x 15” serially numbered and canvas binding., mill turbine and boiler feed pump log book containing 180 folio in each ledger on ledger paper having size 15” x 10.5” serially numbered and canvas binding., power turbine log book containing 180 folio in each ledger on ledger paper having size 17” x 14” serially numbered and canvas binding, 2500 kw. alternator log book containing 180 folio in each ledger on ledger paper having size 18.5” x 15” serially numbered and canvas binding, fiberizer turbine log book containing 180 folio in each ledger on ledger paper having size 15.5” x 12.5” serially numbered and canvas binding, d g set log book containing 180 folio in each ledger on ledger paper having size 26" x 16.5". serially numbered and canvas binding, boiler log book containing 180 folio in each ledger on ledger paper having size 42 x 56 cm. serially numbered and canvas binding., manufacturing department daily juice analyses sheet on ledger paper having size 22.5” x 17.5”, pan slip pad containing 100 pages in each pad on leadger paper having size 7" x 4.5" , stock register containing 300 folio on each ledger on ledger paper having size 8" x 13" serially numbered from 1 to 300 and canvas binding, pan graph

CTN :45588900

08 Jul, 2026 5.20 Lacs

Panchkula - Haryana

Tender For tender for supply of indexable insert type 45 deg milling cutter dia 25 ws dia 25 z2 as per detail in anexure a , inserts for above cutter dia 45 as per detail in anexure a , indexable insert type 45 deg. face milling cutter dia 50 bore dia 22 z4 as per detail in anexure a , inserts for above cutter dia 50 as per detail in anexure a , indexable insert type 45 deg. face milling cutter dia 100 bore dia 32 z4 as per detail in anexure a , inserts for above cutter dia 100 as per detail in anexure a , wiper insert for above cutter dia 100 as per detail in anexure a , solid carbide ball nose end mill dia.12 ss dia 12 as per detail in anexure a , special solid carbide ball nose end mill grade tin coated dia 20 s s dia25as per detail in anexure a , square shoulder face mill mill dia 50 bore dia 22mm z5 , suitable inserts for above face mill cutter dia 50 as per detail in anexure a , solid carbide end mill dia 10mm , weldon shank dia 10mm as per detail in anexure a , solid carbide end mill dia 20mm , weldon shank dia 20mm , solid carbide end mill dia 10.2mm , weldon shank dia 12mm , hss machine tap m12x1.75 , straight shank dia 9mm

CTN :45579098

07 Jul, 2026 NA

Medak - Telangana

Tender For tender for throw away inserted design face milling cutterwith approach angle 45 degrees. (high shear face millin

CTN :45543257

27 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For tool set of face milling cutter dia 160mm 1- square shoulde heavy duty face mill cutter dia 160mm

Central Government/Public Sector

CTN :45544637

23 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of face milling cutter rh m40 sp15 315 mm r z=18 with part code 7096967 ( 01 no)along with axial wiper support(rh cutter) to part code-7106541 (25 no.s)axial support rh to part code-7104996(25 no.s)special wedge spkn15 to part code-6636036(25 no.s)clamp scr m6x20 to part code 12748600900(150 no.s)make:kennametal(or)sandvik(or) walter [ warranty period: 30 months after the date of delivery ] ]

CTN :45348007

17 Jun, 2026 NA

Medak - Telangana

Tender For corrigendum : supply of squre shoulder face milling cutter dia 80mm for iso designated insert tpkr/tpkn 2204. make: taegutec/

Face Milling Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector