Latest fencing pole Tenders | Government fencing pole Tenders

Central Government/Public Sector

CTN :45726549

20 Jul, 2026 NA

Wardha - Maharashtra

Tender For repairs maintenance of electrical and mechanical equipments high mast light search lights and other miscellaneous items at cad pulgaon - disconnecting and taking down existing unserviceable street lights/flood lights any type/watts from pole/wall and dismantling the light fittings. repairing/replacing unserviceable parts re-fixing the same on pole/wall after testing and removal of carbon from line jumpers/tightening of jumper/alignment of fitting defective street light/security light/flood lights fitting/led light from electric pole complete all as directed by eic. note: spare parts and accessories such as led driver, and connected items etc will be measured and paid separately under respective item as supply only and fixing is deemed to be included in this item., supply only led street light driver for 45 watts led street light as per make given all as specified and directed by eic., supply only led street light driver for 60 watts led street light/ flood light type as per make given all as specified and directed by eic., supply only led street light driver for 100 watts led street light/ flood light type as per make given all as specified and directed by eic., supply and fix in repair led streetlight of 45 watt comprises of pressure die cast aluminium housing & having system efficiency>123 lumens/watt i.e 5570 lumens,all leds should be highpower leds of 1w to 3w only with modular lens for batwing shape distribution of 30 degree & 60 degree,input voltage working range is 140 vac to 270 vac,brand name should be embossed,potted driver is used with 4kv internal & external 5kv potted surge protection,short circuit protection,open circuit protection,high & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,ip66 protected,thd10%,cri>70 cct 5700+/-300k,pf>0.9,driver efficiency>85%,lm79 report required from nabl accredited lab. including taking down old unserviceable fittings and bracket house must be adjustable or if required any cost of all fixing hardware shall be included in quoted rate complete all as specified and directed by eic note : 1. engraving of ca number on each lighting fitting (street light / flood light) shall be carried out by the contractor and the cost of the same shall be deemed to be included in the quoted rate. 2. no extra payment shall be made on this account. 3.the complete fitting along with led module, driver, surge protection device and all associated accessories shall be covered under 05 (five) years comprehensive warranty by the contractor from the date of invoice.make : philips/ wipro/crompton, supply and fix in repair led streetlight of 60 watt comprises of pressure die cast aluminium housing & having system efficiency>110 lumens/watt i.e 6670 lumens,all leds should be highpower leds of 1w to 3w only with modular lens for batwing shape distribution of 30 degree & 60 degree,input voltage working range is 140 vac to 270 vac,brand name should be embossed,potted driver is used with 4kv internal & external 5kv potted surge protection,short circuit protection,open circuit protection,high & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,ip66 protected,thd10%,cri>70 cct 5700+/-300k, pf>0.9, driver efficiency>85%,lm79 report required from nabl accredited lab. including taking down old unserviceable fittings and bracket house must be adjustable or if required any cost of all fixing hardware shall be included in quoted rate complete all as specified and directed by eic. note : 1. engraving of ca number on each lighting fitting (street light / flood light) shall be carried out by the contractor and the cost of the same shall be deemed to be included in the quoted rate. 2. no extra payment shall be made on this account.3. the complete fitting along with led module, driver, surge protection device and all as

CTN :45694282

09 Jul, 2026 NA

Chhindwara - Madhya Pradesh

Tender For item supply for chain link fencing, rcc pole and barbed wire - 2026-27 . . . . . . . , galvanized steel chain link fencemesh line wire galvanized steel wire of 3.15 mm diameterfabric size 100x100 mmheight 150 cmline wire 2 numbers of line wire of 4.00 mm diameterstandard- conforming to is-2721-2003, withup to date amendments., rcc fencing poles hight 2.0 mtype straightlenght 2.00 mdimensions bottom 10x10 cm square, top 8x8 cm squarecement concretc mix cement, sand and metal ratio 1:2:4, with 12.5 nominal size coarse aggreate. sand used should be free from clay and salt, concrete mix shall be conforming to grade m-15 of is: 456:2000reinforcement 4 round vertical bars of 6 mm diameter. 11 no of stirrups of 6mm diameter round ms bare 20 cm centre to center.hooks- 5 no. bottom hook should be provided 60 cm above the bottom of the pole. second at 82.5 cm, third hook at 112.5 cm, fourth hook at 150 cm, top and fifth hook at 195 cm from bottom.manufacturing- in order to ensure desiredcompressive strength, rcc fencing poles should be compacted with the help of platform vibrators. surface should be uniform and free from voids. the concrete cover over the reinforcement should not be less than 1.5 cm, galvanised steel barbed wireline wire- galvanised steel wire of 2.5 mmdiameterpoint wire- galvanised steel wire of 2.5 mmdiameterbarbs distance between two barbs 75 mm, thebarbs shall have four points and shall be formedby twisting two point wires each two turns.tightly around both the line wires makingaltogether four complete turns.standard conforming to is-278-2009

corporations/Associations/Others

CTN :45681082

01 Jul, 2026 NA

Ankleshwar - Gujarat

Tender For providing and supplying of electricals materials and other materials for nagarpalika area all street lights and related works in the municipality area and all institutions, gardens, etc. owned by the municipality; electric; goods and other goods etc. annual work for purchase as well as repair and maintenance of all high mast towers of 4- meter height, 12-meter height and 16-meter height operated by ankleshwar municipality etc. and supply of man power as per nagarpalika requirement at annual work for the year 2026-27 (date 01/08/2026 to 31/07/2027) (12 months periods) of ankleshwar nagarpalika - porcelain fuse base with top size-16a, porcelain fuse base with top size-32a, porcelain fuse base with top size-63a, porcelain fuse base with top size-100a, porcelain fuse base with top size-200a, hrc fuses knife edge links type hn for 415v, 50hz. , size size 00 63 amp. rating. suit. for hb type fuse base, hrc fuses knife edge links type hn for 415v, 50hz. size size 00 100 amp. rating hb type fuse base, hrc fuses knife edge links type hn for 415v, 50hz. size size 0 200 amp. rating hb type fuse base, hrc fuses knife edge links type hn for 415v, 50hz. size size 0 300 amp. rating hb type fuse base, hrc fuses cylindrical fuse links type hf for 415v, 50hz. make l&t.size 6 amp. rating, fuse bases suitable for din type hrc fuse links. size 00 type hc for hn fuses 2a to 63a, fuse bases suitable for din type hrc fuse links. size 00 type hc for hn fuses 100a, fuse bases suitable for din type hrc fuse links. size 0 type hc for hn fuses 200a, fuse bases suitable for din type hrc fuse links. size 0 type hc for hn fuses 300a, tpn switch lnt make - 63 amp, tpn switch lnt make - 100 amp, tpn switch lnt make - 200 amp, tpn switch lnt make - 300 amp, insulation taperoll, waterproof tape, single pole mcb switchsize-16a, single pole mcb switchsize-25a, single pole mcb switchsize-32a, double pole mcb switchsize-16a, double pole mcb switchsize-25a, double pole mcb switchsize-32a, double pole mcb switchsize-63a, three pole mcb switchsize-32a, three pole mcb switchsize-63a, four pole mcb switchsize-32a, four pole mcb switchsize-63a, four pole isolator switchsize-100a, four pole isolator switchsize-200a, four pole three phase (440v, ac) elcb switch size-32a, four pole three phase (440v, ac) elcb switch size-63a, four pole three phase (440v, ac) elcb switch size-100a, double pole three phase (440v, ac) elcb switch size-32a - 30ma, double pole three phase (440v, ac) elcb switch size-63a 30ma, double pole three phase (440v, ac) elcb switch size-100a 30ma, digital multimeter of reputed make, single pole mcb gang box, double pole mcb gang box, three pole mcb gang box, four pole mcb gang box, 32 amps. single pole mccb socket, 32 amps. single pole mccb top., 63 amps. 3 phase 4 poles mccb, 100 amps. 3 phase 4 poles mccb

CTN :45654177

23 Jul, 2026 20.00 Lacs

Shahdol - Madhya Pradesh

Tender For supply of electric material -main switch 16 ampere, main switch 63 ampere, main switch 100 ampere, mcb 16 ampere, copper wire 1.5 mm, copper wire 2.5 mm, copper wire 6 mm 3-core, copper wire 10 mm 3-core, copper wire 16 mm 3-core, copper wire 25 mm 3-core, armoured cable 35 mm 3-core, armoured cable 50 mm 3-core, armoured cable 70 mm 3-core, aluminium wire 1.5 mm, aluminium wire 2.5 mm, aluminium cable 10 mm, aluminium cable 16 mm, aluminium cable 25 mm, aluminium cable 50 mm, submersible wire 3-core 2.5 mm, submersible wire 3-core 4 mm, submersible wire 3-core 6 mm, submersible wire 3-core 10 mm, submersible wire 3-core 25 mm, armoured cable 95 mm 4-core, armoured cable 110 mm 4-core, lugs 16 ampere, lugs 32 ampere, lugs 65 ampere, floodlight bulb 400 watt, led light 40 watt, led light 65 watt, led light 85 watt, led. 20w led tube light; 40w led tube light; 50w solar street light setup (including 9m pole); 100w solar street light setup (including 13m pole); 9m high-mast light (with 4 bulbs); 13m high-mast light (with 4 bulbs); garden light (with panel box); solar light; 50w bulb holder; 3/4-inch pipe clamp set; 2-inch pipe clamp set; steelgrip tape; 40w led light repair; 50w led light repair; 60w led light repair; led. repair services (90w light, small/large torches, ceiling fans, wall fans, window coolers, 9-inch/12-inch exhaust fans, 1000w room heaters); modular boards (8-way, 12-way, 18-way); modular switches (6a, 16a); modular sockets (6a, 16a); standard switches (6a, 16a); standard sockets (6a, 16a); fan regulators (modular socket size, standard socket size, standard switch size); 3-pin plugs (6a, 16a); 2-pin plug (6a); sunmica boards (12x18, 6x8); taparia pliers; taparia tester; spanners (7 to 24, open-end & ring types); taparia screwdrivers (small, medium, large sizes); 150ah battery; 1100w inverter; screws (0.5", 1", 1.5"); tricolour decorative lights; drill machine; acs (1 ton, 1.5 ton, 2 ton); electronic fuses; electronic gloves; wire cutters; mixed nails; plastic wall plugs.

State Government

CTN :45604581

07 Jul, 2026 50.00 Lacs

Narsinghpur - Madhya Pradesh

Tender For purchase of fencing material - rcc fencing poles type - straight length - 2.45 meter dimensions - bottom 15x15 cm square, top 10x10 cm square. cement concrete mix -cement, sand and metal ratio 1:2:4 with 12.5 nominal size coarse aggregate. sand used should be free from clay and salt. concrete mix shall be conforming to grade m-15.reinforcement - 4 round vertical bars of 6 mm diameter. 13 nos. of stirrups of 6 mm diameter round ms bars 25 mm center to center.hooks - 7 no.,top hook should be provided 100 mm below the top of poles, and bottom hook should be provided 500 mm above the bottom of poles. the central distance between the top and bottom hooks shall be equally divided to fix remaining hooks. manufacturing - in order to ensure desired compressive strength, rcc fencing poles should be compacted with the help of platform vibrators, surface should be uniform and free from voids. the concrete cover over the reinforcement should not be less than 1.5 cm, rcc fencing poles type - straight length - 2.00 meter dimensions - bottem 10x10 cm square, top 8x8 cm square. cement concrete mix -cement, sand and metal ratio 1:2:4 with 12.5 nominal size coarse aggregate. sand used should be free from clay and salt. concrete mix shall be conforming to grade m-15. reinforcement - 4 round vertical bars of 6 mm diameter. 11 no. of stirrups of 6 mm diameter round ms bars 20 cm center to center. hooks - 5 no., bottom hook should be provided 60 cm above the bottom of the poles, second at 82.5 cm, third hook 112.5 cm. fourth hook at 150cm, top and fifth hook at 195 cm from bottom. manufacturing - in order to ensure desired compressive strength, rcc fencing poles should be compacted with the help of platform vibrators, surface should be uniform and free from voids. the concrete cover over the reinforcement should not be less than 1.5 cm., prcc fencing poles type straight length - 2 meter - each fencing pole shall be of square cross-section measuring 100 mm × 100 mm. the pole shall contain 4 nos. vertical reinforcements made of 4 mm diameter high tensile steel wire. each 2.0 meter fencing pole shall be provided with 6 nos. holes. the top hole shall be provided at 100 mm below the top of the pole. the bottom hole shall be provided at 500 mm above the bottom of the pole. the centre-to-centre distance between the top and bottom holes shall be equally divided for the remaining holes. ‘j’ hooks shall be made of 6 mm diameter ms bars with proper threading at one end, along with nut and washer for tightening purpose. the ‘j’ bolts/hooks shall pass through the holes provided in the fencing poles

corporations/Associations/Others

CTN :45612213

25 Jun, 2026 NA

Godda - Jharkhand

Tender For purchase of following materials related to chapakal/solar water tower/urban water supply pipe line repair and street light repair installed-di split collar isi mark ,di jointer isi mark nut (7suta) , bolt(suta) , coupling bolt (4 sutta) , esr nut bolt (5 suta ,4inch long) , chain kuppi isi mark , grinder machine good quality , tool set , water testing lab equipments , alum , bleaching powder , lime , grease oil , hydraulic oil , engine oil , breaker (16 kg) , generator (10kva) , pipe wrench (24 n0) , pipe wrench (18 n0) , pipe wrench (14no) , 18/19 ring wrench , 16/17 ring wrench , 16/17 dial wrench , pipe lifter(1.25inch) , rod die , blade (aary patti) , 30/32 ring wrench , 30/32 dal wrench , 36 n0 ring wrench , 36no. dal wrench , plash , 20 no ring wrench , aary frame , electrode rod , pecking all dia(100mm to 600mm) , hrc fuse-100a , kit kat fuse-100a , 250 watt ballast, copper winded, make-cropmpton, phillips etc. , 400 watt ballast, copper winded, make-cropmpton, phillips etc. , 250 watt mh lamp, make-cropmpton, phillips etc. , 400 watt mh lamp, make-cropmpton, phillips etc. , ignitor, make-crompton, bajaj etc. , 33mfd capcitor , 42 mfd capcitor , gi d-clamp (size: l-13', b-2') set with 3 nut bolt (m6x16) for street light, 2mm thickness, d-clamp to fix in pole and round clamp to fix light with pipe. , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-1 inch, pipe thichness-1.5mm , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-1.5 inch, pipe thichness-1.5mm , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-2 inch, pipe thichness-1.5mm , meggar, make-fluke,waco etc. , multimeter, make-fluke etc. , tester, make-fluke etc. , 3p, 16-32a, power contactor, make-l&t, abb, siemens, , extension board with 5mtr cable , combination plier, make- taparia etc. , nose plier, make- taparia etc. , wire stipper, make- taparia etc. , screw driver set, make- taparia etc. , hammer(bal pin), 500 g, make-taparia etc. , drill machine ,800-1200 watt, make-bosch,dewalt etc. , analog timer for high mast , gi wire for binding purpose(18 gauge ) , ldr(light dependent resistor) sensor for high mast , soldering iron, power-65 watt with complete set , d-spanner set upton-32mm , ring-spanner set upton-32mm , allen key set , pvc tape , bamboo ladder , industrial socket , industrial plug top , old tyep vintage bakelite switch for street light , insulation piercing connector upton-50mmsq. , surface mounted led pcb plate for 35 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 45 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 50 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 70 watt street light,make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 110 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 120 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 190 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 200 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 35 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 45 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 50 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 70 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 110 watt street light,make-crompton, havells, orient, bajaj etc. , driver for 120 watt street light,make-crompton, havells, orient, bajaj etc. , 3-phase motor starter upto-20 kilowatt motor , 1-phase motor starter upto-5hp motor , electric air blower with dust extraction, 800-1000 watt, make-bosch, buildskill etc. , electrical adjustable pole climbing shoe

State Government

CTN :45614836

08 Jul, 2026 15.91 Lacs

Seoni - Madhya Pradesh

Tender For purchase of rcc fencing pole for forestry work

CTN :45563509

23 Jun, 2026 6.00 Lacs

Alathur - Kerala

Tender For street light repair purchase of items and service charge - street light repair purchase, 9 w led bulb, 12 w led bulb, 18 w led bulb, 30 led bulb, 40 w led bulb, 50 w led bulb, bulb holder, bulb shade, 32 a fuse, 63 a fuse, ldr full set, 20 w led tube set, 22 w led tube set, 2.5 service wire, automatic cut off board, 50 w flood, 100 w flood, 150 w flood, 200 w flood, 2 pole elcb 40 30, 2 pole mcb 16 a, 24 w pcb, 24 w drive, 36 w pvc, 36 w drive, 50 w drive, 50 pcb, 100 drive, 100 w pcb, 150 w drive, 150 w pcb, 200 w drive, 200 w pcb, insulation tape, hookup wire, street light repair service charge, led tube, led street light, mini mast, high mast

Central Government/Public Sector

CTN :45541271

04 Jul, 2026 45.00 Lacs

Panaji - Goa

Tender For repair maintenance and replacement of unserviceable external lighting installations including street light, high-mast lights, garden lights, junction boxes, timers, pole painting and underground cabling at asc, madgaon and ponda areas under ge panaji

Central Government/Public Sector

CTN :45541286

04 Jul, 2026 45.00 Lacs

Panaji - Goa

Tender For repair, maintenance and replacement of unserviceable external lighting installations including street light, high-mast lights, garden lights, junction boxes, timers, pole painting and underground cabling at altinho and bambolim areas under ge panaji

Fencing Pole Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector