Latest fiber box scrap Tenders | Government fiber box scrap Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

Central Government/Public Sector

CTN :45319011

15 Jun, 2026 5.00 Lacs

Delhi - Delhi

Tender For supply of fibre pigtales multimode sc type 6 strand pigtails , fiber pigtails multimode lc type 6 strand pigtails , input output box , utp cat 6 patch cord 1 meter , utp cat 6 patch cord 2 meter , utp cat 6 cable 305 meter rim , rj45 connectors

Central Government/Public Sector

CTN :45313264

03 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot non ferrous scrap - scrap and unserviceable condemned multicore copper cable/wire, jelly filled copper cables, signaling cables of pvc insulated of different diameter and length, and different types of similar and dissimilar muilticore copper cables with or without lugs, ms/ aluminium armoured, ms nut, fibre, lead, glass wool, etc attachment of sort and sizes. (qty approx) (note-cpcb or state pcb licence required and same are to be produce at the time of delivery with log book. otherwise, material will not be delivered.)

Central Government/Public Sector

CTN :45313265

03 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot non ferrous scrap - scrap and unserviceable condemned mixed aluminium items such as mix all types of aluminium moulding patti, aluminium strips, patti, cut pieces of cheqred sheet & other types of similar and dissimiler aluminium items with or without minor (m.s, s.s, fibre, wood etc. attachement). (qty approx)

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government/Public Sector

CTN :44610279

27 May, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For bid to ras supply of caps cook food handler size 1 or 6 and half part no. cncmt-psh0021 , socks cotton black size l pf 30cm part no. cncmt-psf0113 , swimming trunk size 100cm part no. cnmct-scs0024 , mosquito net part no. cncmt pcx 0070 , cap badge peak for adhikari and above , cap badges peak for pradhan navik and below , pillow with hollow polyster fibre 650mm x 400mm part no. cncmt-pcx0080 , vest woolen size 100cm part no. cncmt-psu0044 , lanyard pf part no. cncmt-nea0070 , slip pillow part no. cncmt- nea0100 , singlet pti size medium , sports shoe for pti size 8 , sports shoe for pti size 9 , track suit for pti navy blue size large , white shorts for pti size- medium

Central Government/Public Sector

CTN :44913897

27 May, 2026 NA

Haridwar - Uttarakhand

Tender For bid to ras supply of polyester fibre endless round sling; item code - hw7799911778 , polyester fibre endless round sling; item code - hw7799910500 , polyster single path round slings; item code - hw7799911530 , polyster single path round slings; item code - hw7799911522

Central Government And Public Sector

CTN :44822445

27 May, 2026 82.50 Lacs

Mumbai - Maharashtra

Tender For bid to ras corrigendum : providing of custom bid for services - laying of plb pipe duct and associated works by hdd trenchless technology or open trench method optical fibre cable pulling blowing and splicing works etc under rehabilitation plan for optical fiber cable route of aurangabad business area o..

Central Government And Public Sector

CTN :44802970

27 May, 2026 77.36 Lacs

Nanded - Maharashtra

Tender For bid to ras providing of custom bid for services - laying of plb pipe duct and associated works by hdd trenchless technology or open trench method optical fibre cable pulling blowing and splicing works etc under new replacement plan for optical fiber cable route of nanded business area of m..

Central Government/Public Sector

CTN :45283497

28 May, 2026 NA

Bokaro - Jharkhand

Tender For fibre sling len:87.5m,wd:150mm,th:3.6mm(1items) comprising of following: 1 - fibre sling len:87.5m,wd:150mm,th:3.6mm ,

Fiber Box Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors