Latest fine sand Tenders | Government fine sand Tenders

State Government

CTN :45700595

01 Jul, 2026 NA

Akola - Maharashtra

Tender For supplying various material for construction of bharat nirman seva kendra at borala gp takli nimkarda tq balapur dist akola under mahatma gandhi national rural employment gurantee act.- all frame rail angle anodized , bricks , coarse sand , fine sand , plastic emulsion paint , portland cement , pvc gasket for glass , steel shuteering for roof, landing, balcony, having 12.5cm tk , steel tmt fe 500 , stone agreegate (single size) 12.5 mm nominal size , stone agreegate (single size) 20 mm nominal size , vitrified tile (matt finish)size 590 to 605 mm*590 to 605 mm*8 to 10 mm

State Government

CTN :45719782

04 Jul, 2026 NA

Rampur Hat - West Bengal

Tender For supply of materials for mgnrega works - supply of materials, earth, coal (steam), carriage of tar bitumen, bitumen vg-30, bitumen emulsion, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone screening type a (13.2 mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), 1st class bricks, coarse sand, stone boulder ( 225mm-150mm ), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, loading unloading & stacking sand/ stone aggregate (less than 40mm nominal size), stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia, rcc pipe 900 mm dia np - 3 spigot, carriage of r.c.c. pipes 900 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, stone aggregate(single size):63 mm nominal size, river bed material, geotextile 120 gram per sqm membrane, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm

Central Government/Public Sector

CTN :45716459

08 Jul, 2026 1.95 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For supply of dry chemical powder , clip jubilee 3 and half to 4 1 by 8 , emery cloth abrasive cloth is grit 36 , cloth coated pvc 102 cm wide , paint roller 6 inch , paint brush 4 inch , paint brush 2 inch , gloves leather a , detergent solution , grease lg 280 , cleaner white toilet , paint roller 9 inch , ear plug , switch socket 3 pin 15a isi mark , rope polypropylene 16 mm isi mark , broom country , super mop , tape transparent 1 inch , sand paper isi mark , paint roller 7 , paper napkin , dvd , envelope cloth coated 12x16 inch , envelope cloth coated 10x14 inch , envelope cloth coated 9x12 inch , tape transparent 2 inch , tape insulating 25 mm , wonder tape 2 inch , wet surface putty , xerox paper 80 gsm 420 x 297 mm a3

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

corporations/Associations/Others

CTN :45707328

03 Jul, 2026 NA

Ahmedabad - Gujarat

Tender For procurement of 17a1 dental consumable items - acrylic cold cure powder + liquid, acrylic fullteeth set, acrylic posteriro teeth set of 16, adhesive powder, air rotor hand piece spray, bott, alpine mounted stone for c.a hp/ st. hp, amalam capsules single use, anterior teeth set of 6 upper/lower, applicators tips brushes for bonding agent, arch wire- 032" round can wires ( straight, length), autoclave strip, barb broches n0.15-40, begg's buccal tubes weldable--- oval, beggs t-pins, blue inlay wax, bonding kit ( light cure ), bonding kit ( self cure ), brass lock - pins stege - 1, brass lock - pins stege - 3, brass wire, bristle brush for polishing, buccal tubes ( oval ), buff for polishing - bondable, buttons -rect-curved -1, calcium hydroxide with iodofoam, carbide bur cahp, carborundum disc, coe pack, combifin material set, composite finishing & polishing kit (abrasive, stris & discs), composite material, brown,white,black,yellow, composite placement instruments +, contouring instruments (teflon coated), core formers, dental floss, dental mercury, dental napkin, disposable sleeve cover for opg bite block, disposeble sucction tip, dowel pin, edta gel, elastic rubber rings indian, endo block, endo flass, expansion screw, expansion screw ( conventional ), expansion screw hyrax (size : 9 mm & 11 mm ), extra oral film - { size : 8"x10"} for kodak, system, flouride varnish, foamtray (flouride applicator) size- adult, formacresol, g.p.stick, gold alloy, gold castin wax, gutta percha cutter, hand protaper files, h-file, high hat pins -1, impression compound, investment materials, iodoform powder, iopa x-ray film for kodak system, light tranimiting wedges (010), liquid for electopolishing unit, low friction lig - ties, magic foam cord, mandril for sand paper, mandril for st.h.p., material for temporary gingival, miracle mix (silver reinforced gic), modeling wax, needle no 18 half circle, niti -file .02 taper ( 21mm) no. 15-40, niti -file .02 taper ( 25mm) no., 15-40, niti plugers no.15-40 assorted sizes, pediatric iopa x ray film{iopa size 0} for, kodak system, pesso reamers no.1 to 6, pretrimmed,precontoured,prefestoond s.s, crown, pumic powder, relining gel, relining material/soft reliner for acrylic, rotary protaper files, rotational wedges, rubber cup for ca hp, rubber dam sheets, sand for sandblasting unit, sand paper, sand paper sheets, scaler handpieces, scalertips, seprating medium, silver amalgam alloy, sodium hypocloride, steel valcanite trimmer, sticky wax, tooth preparation kit, topical fluoride gel (apf gel), universal polishing paste for denture, wax carving set, wires can beta - jit wires, zero degree molar teeth set of 16, preadusted edgewise 0.022 mbt kit, container complete no. 22 (plastic box), 8x10 dry view films 125 sht, non absorbable black braided silk surgical, suture on reel non sterile length 25/30 mtr, diametr 3-0, unolock syringe 2.5ml, rvg sleev for x ray(pktt-500), mercury (225gm), etchent jumbo syringed, occlusal film for x ray, fluride gel, fluride application tray, cool temp, metal alloy (white metal), prophylaxis paste, zinc oxide (100gm0, eugenol, 17% edta liquid, fiber splint, fogar solution, skyblue wax

Corporations And Associations And Others

CTN :45563054

07 Jul, 2026 NA

Rupnagar - Punjab

Tender For corrigendum : e-tender for civil contract jobs - civil contract job:, earth filling under floors with surplus ordinary soil or soil containing gravel or kankar, including ramming, watering and consolidated lead., first class burnt brick work laid in cement sand mortar 1:7 in foundation and plinth, laying 80 mm thick factory made cement conc. inter locking paver bricks after m-40 grade made by block making machine with string vibratory compaction ordinary gray color & pattern over 50 mm thick compacted bed of coarse sand filling the joint with fine sand, complete in all respect ., dismantling brick of flagged stone flooring including concrete base, dismantling concrete plain 1:2:4 mix, cement concrete 1:2:4 with stone ballast or shingle, a. mixing by manual mean, b. mixing by mechanically mean using concrete mixer, laying of dry brick ballast 40mm gauge for flooring, civil work (rate to quoted on csr rates)

CTN :45738969

15 Jul, 2026 95.0 Thousand

East Khasi Hills - Meghalaya

Tender For fine sand

CTN :45707900

03 Jul, 2026 8.89 Lacs

Kapurthala - Punjab

Tender For supply of material for raod gang for m.c kapurthala.- crasher, coarse sand, stone aggregate, fine sand, cement, bricks, steel, pvc pipes dia 200 mm, pvc pipes dia 160 mm, pvc pipes dia 250 mm

CTN :45718090

15 Jul, 2026 4.43 Lacs

Mau - Uttar Pradesh

Tender For tender for supply of epdm tube bubble diffuser for etp aurator, 90 mm dia x 1000 mm long with all accessories, model-mf30, 1000€ mucedpm, spares for online monitoring system ph electrode, masaibus for flow monitoring, piezometar complete for recording of ground water level & temp. with cable other absesones, ultrasonic flow tratsmitter for effluent inlet drain, electronic flow meter da-6 (emf type) electro magnetic flowmeter for inlet primary clarify, electromagnetic fluwmeter for tubewell size 6" dia, electromagnetic flowmeter 4, pen type hand ph meter electronic), tds meter, do meter, digital balance with 01 mg to 10 gms accuracy, thermometers 0.11 deg * c, b.d.d. testing kit, c.o.d testing kit, b.dd. bottles, reagent bottles 500 m, pipettle, 5ml, 10ml, 20ml, conical flask, 250ml, 500ml, beakers, 100ml, 250ml, 500ml, graduated cylinder, 1000, 500m, burette graduated, 50ml, 100ml, media for activated corbon, peable 3, peable 1%", peable 1", fine sand 16x32, media for m.g.f. filter, peeble 2", peeble 1-0.5", silica sand 4x8, silica sand 8x16, silica sand 16x32, bio culture, alum

CTN :45298008

01 Jul, 2026 NA

Parganas - West Bengal

Tender For bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh

Fine Sand Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Corporations And Associations And Others