Latest flicker generator Tenders | Government flicker generator Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

corporations/Associations/Others

CTN :45294905

03 Jun, 2026 2.97 Lacs

Kolkata - West Bengal

Tender For supply and installation of various electrical equipments in place of burn out and damaged ones at different panels and allied works at shanagar burning ghat. - supply and delivery of mccbs with thermal magnetic release breaking capacity thermal release rang 125-160a, breaking capacity icu at 415v ac, 50hz, 50ka4pole , supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range: 24-40, mn2, , power contactors: supply and fixing the power contactor t.p 70a, l & t make (ml-4) having 240v, 50hz, coil incl. 2 no + 2 nc aux contact block., , power contactors: supply and fixing the power contactor t.p 16a, l & t make having 240v, 50hz, coil incl. 1no+1nc aux contact block., , supply & fixing of 415/440 volt, hrc fuse (make: l&t/havels/cgl/ge).for 250 amp supply and fixing of analog ammeter ranging 0-100amps having c.r ratio of 100/5a, 144 mm sq size (make: ae/kappa/mp)., , supply and fixing of analog voltmeter ranging from 0-500 v of 144 mm sq size (make: αε/καрралмр)., , supplying and fixing 415v, tpn sfu open execution in existing ss enclosure/cubical with nuts bolts etc incl. s & f 3 nos. din type hrc fuse as per rating. 125a siemens, , supplying and fixing 240/415 v mcb of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection legrand 63 a fp, , supplying of 1.1 kv. grade pvc insulated conductor of following cables (make: polycab/gloster/havells/):size in sq. mm, no & dia. of wire in mm, no of core - 4 1/2.24 3, , annexure - i basic rate of materials: (all rates of materials from k-1 to k-14 are excluding vat) 70.1.5 sq.mm 'fr' stranded copper wire, , compression glands.supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture(proof entry of xlpe/pvc armoured cables as below: for, , 3 core.(i)upto 4 sqmm, , finishing cable ends.(b)finishing the end of following xlpe/pvc, , armoured cables by crimping method incl. supplying and fixing solderless socket (dowels make), tapes, anticorrosive paste & jointing materials. (ii) 2 core 6 sqmm cable, , temperature controller: a) supply and fixing the digital type temperature controller of range (0-1200) deg. c of overall dimension 92 sq mm dia x 105mm depth having (cr-a1) heat sensor and 1 no + 1 n.c change over contact to be actuated at crossed of desired temperature in deg.c complete power supply unit of 230v 50 hz., , blue max make

State Government

CTN :45201395

04 Jun, 2026 7.86 Lacs

Jalandhar - Punjab

Tender For corrigendum : replacement of pipeline column pipe water connection sluice valve repair of chlorinator and repair of expansion joint of water supply scheme kang saboo block nakodar distt jalandhar under 15th fc

State Government

CTN :45201408

04 Jun, 2026 9.88 Lacs

Jalandhar - Punjab

Tender For corrigendum : replacement of pipeline water connection sluice valve repair of staff quarter and repair of expansion joint of water supply scheme sarinh block nakodar distt jalandhar under 15th fc

State Government

CTN :45015913

29 May, 2026 1.40 Crore

Guntur - Andhra Pradesh

Tender For corrigendum : procurement and supply of equipment - rotor/shaker, adult airway management, trainer, block wax trimmer, little anne (for adult cpr), little anne (for child cpr), sterile connection device, turbido meter, micro pipettes- fixed set, esr analyser, fully automated, chemiluminescence, immunoassay, urine analyser gmc/ggh piduguralla new medical college and hospital in andhra pradesh (2 years rate contract)

CTN :45263202

29 May, 2026 NA

Panipat - Haryana

Tender For corrigendum : works contract for deployment of 1 no 135 ft articulated manlifter with operators and all other accessories on monthly rental basis in connection with ms block unit p25 project of iocl panipat

CTN :45287705

28 May, 2026 NA

Panipat - Haryana

Tender For works contract for supply of 01 no 135 ft manlifter and 02 nos 120 ft manlifters with operators maintenance and all other accessories on monthly rental basis in connection with ms block unit p25 project of iocl panipat

CTN :45287714

28 May, 2026 NA

Panipat - Haryana

Tender For deployment of 1 no 80 mt capacity tyre mounted crane with minimum 45 mtr main boom along with all accessories on monthly rental basis for works contract incl operator repair maintenance etc in connection with ms block unit project of iocl panipat

CTN :45282467

29 Jun, 2026 NA

Kanchrapara - West Bengal

Tender For supply of 4 conductor through terminal block, center marking, rated voltage 800 v, ratted current 26 a, cage clamp connection, front entry wiring, horizontal design, din 35 rail mounting for conductor size 0.08 to 4 sq. mm, grey color, made of polyamide 66 to wago item no. 281-652. makes acceptable : wago, phoenix, weidmuller, connectwell, elmex. oem or authorized dealers only to quote with documentary evidence. [ warranty period: 30 months after the date of delivery ] ]

CTN :45144252

26 May, 2026 10.00 Lacs

Shahdol - Madhya Pradesh

Tender For annual tender of supply of water supply materials - water supply material, g.i pipe 1 inch, g.i pipe 2.inch, g.i pipe 3 inch, g.i socket 1 inch, g.i socket 1.25 inch long, g.i socket 2.inch, g.i socket 2.inch long, g.i socket 3 inch, g.i elbow 1 inch, g.i elbow 1.25 inch, g.i elbow 2.inch, g.i elbow 3 inch, g.i tee 1 inch, g.i tee 1.25 inch, g.i tee 2.inch, g.i tee 3 inch, hdpe pipe 1 inch, hdpe pipe 1.25 inch, hdpe pipe 2 inch, hdpe pipe 3 inch, hdpe nipple 1 inch, hdpe nipple 1.25 inch, hdpe nipple 2 inch, hdpe nipple 3 inch, hdpe equle tee 1 inch, hdpe equle tee 1.25 inch, hdpe equle tee 2 inch, hdpe equle tee 3 inch, hdpe elbow 1 inch, hdpe elbow 1.25 inch, hdpe elbow 2 inch, hdpe elbow 3 inch, hdpe bend 1 inch, hdpe bend 1.25 inch, hdpe bend 2 inch, hdpe bend 3 inch, s.s. clamp with nut bolt, 2 inches, a.c. pipe 4 inches, washer no. 2 and 3, brass elbow 1/2 inch, brass elbow 1 inch, brass elbow 3/4 inch, raw rubber, cable 2.5 mm and 6 mm (national/kisan/texmo), connection cable 4 mm / armored - isi, connection cable 6 mm / armored - isi, pvc saddle clamp set for pipe connection 1 inch, pvc saddle clamp set for pipe connection 1.25 inch, pvc saddle clamp set for pipe connection 2 inch, pvc saddle clamp set for pipe connection 3 inch, ms saddle clamp set for pipe connection 1 inch, ms saddle clamp set for pipe connection 1.25 inch, ms saddle clamp set for pipe connection 2 inch, ms saddle clamp set for pipe connection 3 inch, hose clamp s.s. 1 inch, hose clamp s.s. 1.25 inch, hose clamp s.s. 2 inch, hose clamp s.s. 3 inch, pvc socket 1 inch, pvc socket 1/2 inch, pvc socket 3/4 inch, pvc valve 1 inch, pvc valve 1/2 inch, pvc valve 3/4 inch, pvc tee 1 inch, pvc tee 2 inches, pvc teflon tape, pvc gate valve 1 inch (kisan/texmo), pvc gate valve 1/2 inch (kisan/texmo), pvc gate valve 2 inches (kisan/texmo), pvc gate valve 3/4 inch (kisan/texmo), pvc elbow 1 inch (kisan/texmo), pvc elbow 1/2 inch (kisan/texmo), pvc elbow 2 inches (kisan/texmo), pvc elbow 3/4 inch (kisan/texmo), pvc casing pipe plain pipe 100 mm (kasta/kisan), pvc pipe 1 inch (kisan/texmo), pvc pipe 1/2 inch (kisan/texmo), pvc pipe 3/4 inch (kisan/texmo), pvc pipe 1.25 inch (kisan/texmo), pipe wrench 12 inches, pipe wrench 14 inches, pipe wrench 16 inches, pipe lifter 2.25 inches, pipe die 1.25 inch, panel board 15 hp three phase bentex (automatic), patti clamp 1 inch (isi), patti clamp 1.25 inch (isi), patti clamp 2 inches (isi), patti clamp 3 inches (isi), rubber ring 80 mm (isi) 3 inches, rubber ring 100 mm (isi) 4 inches, rubber ring 125 mm (isi) 5 inches, rubber ring 150 mm (isi) 6 inches, rubber seat packing, rod die, c.i. flange 2 inches, c.i. flange 3 inches, c.i. flange 4 inches, c.i. reducer tee 100x100 mm (isi), c.i. reducer tee 80x100 mm (isi), c.i. reducer tee 100x100x150 mm (isi), c.i. reducer tee 80x80x100 mm (isi), c.i. tee 100x100x100 mm (isi), c.i. tee 100x100x80 mm (isi), c.i. tee 150x150x150 mm (isi), c.i. tee 80x80x100 mm (isi), c.i. tee 80x80x80 mm (isi), c.i. tail piece 100 mm (isi), solvent, white cement, water tank 500 liters (syntex/kisan/texmo), water tank 1000 liters (syntex/kisan/texmo), vice handpump no. 4, chain pulley block 3 tons, nut and bolt, tail piece 2, 3, and 4 inches, gate valve 1 inch, gate valve 2 inches, gate valve 3 inches, gate valve 4 inches, gate valve brass 1 inch - isi, gate valve brass 1/2 inch - isi, gate valve brass 3/4 inch - isi, gate valve brass 2 inches - isi, gland rope, end cap pvc 1 inch, end cap pvc 1/2 inch, end cap pvc 3/4 inch, d joint ci 3 inches, d joint ci 4 inches, d joint ci 6 inches, hdpe d joint 2.5 inches, hdpe d joint 3 inches, hdpe d joint 4 inches, hand grinder machine 1600 watt bosch 5 inch, hand grinder blade 5 inch and 6 inch, hammer machine 1500 watt 26 mm bosch, breaker machine demolition 5 kg, fusing machine, sluice valve 50 mm, sluice valve 75 mm, sluice valve 90 mm, sluice valve 110 mm, tee 75 mm, tee 90 mm, reducer socket gi 1.25 inch-1.5 inch, reducer socket gi 2 inch -1.25 inch, r

Flicker Generator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

State Government

State Government