Latest fly ash system Tenders | Government fly ash system Tenders

State Government

CTN :45510068

29 Jun, 2026 NA

Kheda - Gujarat

Tender For supply of materials for commissioning of roots blower system with rotary feeder at unit#3, esp of gsecl-wtps. - 1" pulse valve of fly ash system, unit -7 , sequential timer for pulse jet sys, 10 channels

CTN :45463639

29 Jun, 2026 9.43 Lacs

Murshidabad - West Bengal

Tender For procurement of consumable items required for upcoming unit 4 overhauling for ahp-mm-ii,sgtpp. - procurement of consumable items required for upcoming unit-4 overhauling for ahp-mm-ii,sgtpp., ball valve 25nb ss, elbow,ms,25nb size,both side thread $for water line application, elbow,ms,40nb size,both side thread $for water line application, elbow,ms,50nb size,both side thread $for water line application, bend 100nb x90 deg (fly ash system),ms # ( thickness: 9.52mm ), bend,ms,250mm x 250mm x 90deg ( 9.52mm thickness ), anabond 666 size 310 gm #, nipple (bsp),ms 15 nb,100 mm long, nipple,ms,40nb size,lgth:100mm $for water line application both side 200mm thread, nipple,ms,50nb size,lgth:100mm $for water line application both side 200mm thread, felxible rubber hose,1/2x1 mtr long, bend,90deg,seamless,40nb,sch-40,ss-316 for alum dosing system at ptp, bend ss 90deg seamless 15nb r=1.5d for air line mat: sa 403 wp 304, wall thick: sch40, nrv,non return valve:15mm 1/2in #, flange,40nb,ms,asa150#std, flange,80nb,ms,asa150#std, ms flange, size: 150 nb, ms flange, size: 250 nb class: 150 dimension and drill as per ansi b 16.5, ms flange, size: 200 nb class: 150 dimension and drill as per ansi b 16.5, ms flange, size: 100 nb class: 150 dimension and drill as per ansi b 16.5, socket with plug (s.i) sz. 15mm, bend,ms,200 mm x 200 mm x 90 deg for ash water line ( 9.52mm thickness ), gasket,asbestos,style 11,t2mm # ( make: spitmann/champion,+10 kg clearance in quantity. ), asbestos gasket style 11 size 3mm thk # make: champion/spitmaan, oil gasket style 59 nonmetalic th 1mm ( make: spitmann/champion,+10 kg clearance in quantity ), ptfe gland packing-1094,size-16 mm, neoprene rubber sheet # size,1m x 2m x 3 mm thick, inspection window glass,clinker grinder $for bottom ash hopper ( shall consist of following ;- a) glass 225 mm dia and 16 mm thk high temperature tuffen glasss - 1 no b) special silicon gasket - 2 nos. c) special rubber asbestos gasket - 1 nos ), male hex nipple male hex nipple 1/2" npt (m) x 1/2" npt (m) moc: ss316, gasket,asbestos jointing sheet,t-1mm # gasket-asbestos jointing sheet style-59 brand-champion/spitman thickness-1 mm ( "sheet size: 2000x1500 mm thickness: 1 mm maximum pressure: 150 ksc. maximum temperature: 550 degc density: 1.9-2.2 g/cc tensile strength: 280 ksc compressibility: 7-10.5% gas permeability: (>)>0.5 cc/min stress relaxation: 300 ksc recovery: >=50% ignition loss: =(>)>25% compliance: is 2712. tolerance: 10% (in weight)" champion brand style 59 indenting department:bm-70,tm-100, ahm-50,chmws-50. ), gasket,sheet,caf,style-59,0.5mm thick # sheet,caf gasket spitmaan style-59 size:0.5mm thick,colour black,media: oil grease etc max temp: 550 deg c max pressure: 150 kg/sq cm specification: is2712-1998 grade is 2712-1979 grade o/i,is 2712-1971 grade a/o british bs 1832-1972 ( make-spitmann ), bend,ms,150mm x 150mm x 90deg ( thickness 9.52 mm ), bend 65nb x90 deg,thk-9.5mm,ms for fly ash system #, bend 80nb x90 deg,thk-9.5mm,ms for fly ash system #, socket,1/2 inch (f),thread,ss304 1/2 inch (f) all thread socket,ss 304# for impulse line connection sgtpp1 ( with both ends internal threaded for water line application wp-20ksc moc-ss 304,grade-heavy duty ), nipple,40nb size,lgth:100mm for seal line application (vaccum& slurry line) , moc: ss304, both side thread length 35mm. ( both side thread length 35mm. )

CTN :45270984

09 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For corrigendum : supply of spares for material handling valves of dry fly ash system

State Government

CTN :45413956

23 Jun, 2026 1.52 Crore

Sarni - Madhya Pradesh

Tender For procurement of spares for suction/ discharge valve unit, pulsation diaphragms and seal unit of weir mineral make geho pumps model no. tzpm 250 installed at silo in hcsd system of fly ash system of ahp-iv unit 10 and 11 stps, sarni. - clamping piece part no. 831.901.026, valve support part no. 831.901.033, conical valve part no. 831.350.157, valve ring part no. 831.700.729, valve seat part no. 831.150.854, lock nut part no. 831.900.141, guide bush part no. 831.900.824, compression spring part no.825.107.053, lock pin part no. 831.901.025, piston diaphragm part no. 824.050.023, pulsation diaphragm part no. 824.030.000.64, seal part no. 933.730.250

CTN :45403251

09 Jun, 2026 1.30 Lacs

Ganganagar - Rajasthan

Tender For supply of pressure switches and spares for dry fly ash system of unit 7, ahp, kstps, kota for the year 2026-27 against ltn 01/2026-27

CTN :45379400

20 Jun, 2026 NA

Midnapore - West Bengal

Tender For procurement of consumables for oh of u6, 2026 under ahp-mm and tm dept, ktps. - pu tube connector 1/2 1/2" to 10 mm npt(m) pu tube connector ( push male pu tube connector thread size: 1/2inch pipe size: 10mm, moc: metal body (chromed) with pbt cap fluid: air operation: push-in make-aeroflex/spac pneumatic ), pu tube connector 1/4" to 10 mm npt(m) 1/4" to 10 mm npt(m) pu tube connector ( push male pu tube connector thread size: 1/4 inch pipe size: 10mm, moc: metal body (chromed) with pbt cap fluid: air operation: push-in make-aeroflex/spac pneumatic ), pu tube connector size 10 mm diax3/8in bsp(m) ( push male pu tube connector thread size: 3/8 inch pipe size: 10mm, moc: metal body (chromed) with pbt cap fluid: air operation: push-in make-aeroflex/spac pneumatic ), pu tube,od-10mm, id-6.5mm pu tube od-10mm,id-6.5mm,wall thickness1.75 mm,temp range-40f to+160f,hardness shorea98,brust pressure(psi)-450, vacuum rating-to 28"hg,working pr.(psi)-150 @70f ( make:-aeroflex/spac pneumatic ), anabond 666 size 310 gm # ( thixotropic silicone sealant in hdpe cartridge (310g) make:-anabond ltd ), bend pipe, 90 deg, 40nbx40nb,ms seamless for wet ash system moc-ms thk-3.7mm as per sch 40 steel pipe ( schedule 40 no negative tolerance in thickness is allowed ), bend,ms,200x200x90 deg ash water line ( seamless, schedule 40 thk-9.52mm no negative tolerance in thickness is allowed ), bend,ms,150x150x90 deg ash water line ( seamless,schedule 40 thk-9.52mm no negative tolerance in thickness is allowed ), bend pipe,90 deg, 50nbx50nb,ms seamless for wet ash system moc:-ms thk-4mm as per sch 40 steel pipe, bend,ms,80x80x90 deg ash water line ( seamless, sch-40 thk-7.0mm no negative tolerance in thickness is allowed ), bend,ms,100x100x90 deg ash water line ( seamless,sch-40 thk-7.5mm no negative tolerance in thickness is allowed ), u-clamp,m16 for 8 in ci pip for ahp bktpp moc: ms; size: 232mm dia,308mm length,75m ( with 02 nos of nuts & 02 nos of washers for each u-clamp ), turn buckle,gi ( with ms mounting bracket type-eye to eye eye hole should be for m20 bolt total length-1350mm thk-20mm square section-50x250mm ), gasket,200nb coupling,neoprene rubber for ash conveying line ( temp withstand capacity-140 deg celcius ), flat gasket,8 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,9 inch,od,11 inch,th.,1/4 inch ( temp withstand capacity-140 deg celcius ), flat gasket,6 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,7 in,od,8-3/4 inch,th.,1/ 4 inch ( temp withstand capacity-140 deg celcius ), flat gasket,10 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,11 in,od,13 in,th.,1/4 in ( temp withstand capacity-140 deg celcius ), flat gasket,9 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,10 in,od,12 in,th.,1/4 in ( temp withstand capacity-140 deg celcius ), gasket,graphite coated asbestos,10 inch # # for sleeve coupling in vacuum line ( temp withstand capacity-140 deg celcius ), gasket,9 inch,graphite coated asbestos # # for sleeve coupling in vacuum line,stg.-2 ( temp withstand capacity-140 deg celcius ), gasket,6 inch,graphite coated asbestos # # for sleeve coupling in vacuum line,stg.-2 ( temp withstand capacity-140 deg celcius ), gasket for esp hopper gate mouth hand hole od-170mm,id-120mm,thk-5mm for fly ash system,unit-4,5,6 ( moc-neoprene rubber temp withstand capacity-140 deg celcius ), gasket for esp hopper chute face od-400mm,id-315mm,thk-3mm for fly ash system,unit-4,5,6 ( moc-neoprene rubber temp withstand capacity-140 deg celcius ), gasket for esp hopper hand hole for actuator sa25e125 od-118mm,id-90mm,thk-9mm for fly ash system,unit-4,5,6 ( moc-neoprene rubber temp withstand capacity-140 deg celcius ), gasket for esp hopper v

CTN :45386932

16 Jun, 2026 6.59 Crore

Gwalior - Madhya Pradesh

Tender For construction and development (civil work) for construction and demolition waste plant of 100 tpd as per boq of rfp/dpr supplying erection and commissioning of machines/equipment for construction and demolition (c and d) waste plant of 100 tpd 2nd cal - all kinds of soil, "excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers,, loose or soft soil, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all w, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "foundations, footings, bases of columns, etc. for mass concrete.", cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "columns, pillars, piers, abutments, posts and struts.", "reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves,, "lintels, beams, plinth beams, girders, bressumers and cantilevers.", "along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm o, "filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exce, thermo-mechanically treated bars. (fe 500 d or more), "aluminum turbo ventilator fan, size: dia 600 mm market rate", "sky light market rate ", 80x1.25mm m.s. laths with 1.25 mm thick top cover., "providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 wit, cement mortar 1:6 (1 cement : 6 coarse sand), 1:6 (1 cement: 6 sand), two or more coats on new work, "structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoist, 0.80mm thick with zinc coating not less than 275gm/m , 0.80mm thick with zinc coating not less than 275gm/m , "35 mm thick including isi marked stainless steel butt hinges withnecessary screws.", 35 mm thick shutters, half brick masonry with of class designation 40 in foundation and plinth in.cement mortar 1:4 (1 cement : 4 coarse san, "providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) nano polished (glossy, providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be lai, providing and fixing m.s. grills of required pattern to wooden frames of window etc. with m.s. flats at required specin, "construction of embankment/sub grade/ earth shoulders, as per clause 305 & its sub-clauses, where required but with app, "construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor, "providing, laying, spreading and compacting graded stone aggregate to wet mix macadam including premixing the material, providing and applying primer coat with cationic bitumen emulsion (ss1 grade) on prepared surface of granular base inclu, @ 0.25 kg per sqm (normal bituminous surfaces), for grading ii( 50-75mm thickness ) bitumen content 3.4% (vg-30), "for grading ii ( 30-40 mm thickness ), bitumen content 5.4% (vg-30)", procurement of fully automatic c&d waste processing unit(100 tpd) with dry and wet process inculding feeding & crushin, procurement of table vibrator for paver making unit including table vibrator,colour mixer,colour pigment,tables,concre, procurement of fully automatic fly ash bricks machine (120 ton compress force) with fully sensor based controlled 7 nos, procrement of vehicles articulated front end wheel loader,4-wheel drive,1.4 cum bucket,hydrostatic drive,, procrement of vehicles/tipper truck blazo 28t tipper,9 speed,bogie suspension,11x20-16pr tyres,6.17rar ,nac,16 cum box,4, procurement of pneumatic breaker (quotation), electrification /internal wiring and electrification (market rate)

CTN :45228398

30 May, 2026 NA

Birbhum - West Bengal

Tender For procurement of bottom ash and wet ash spares for overhauling of unit 3 under ahp mm - nozzle for air washer (dry for fly ash system size: 5 mm dia,for ahp-ii, nozzle with insert # tip dia 9 mm of insert,moc-ss 410 (nozzle),ceramic,hardness 7708 mohs,ahp-i# for 10in wetting head,make-dcips,pn-6,7, inlet section fr wetting head10" of ahpi ( one side bevelled and others side plain (b/p),after 90 degree 10" elbow for wetting head. moc: durite 450bhn ), adaptor for collector tank ( one side bevelled and others side flanged with holes. mat: durite 450bhn ), adapter b/b # for ahp-i,below wetting head# for collection tank ( both sides bevelled. mat: durite 450bhn ), tail piece after combining tube,ahp-ifor ba slurry line,make-dcips ( one side bevelled and others side plain (b/p),after combining tube. moc: durite 550bhn ), complete assembly of jet pulsion p/p moc: durite 550 bhn for body,ss-410 for nozzle tip,ceramic 7 moh min for nozzle insert,cap.-60 t/h,pr.-10 kg/cm2 for ahp-i, combining tube # dcips make-dcips,part no.-1,moc: durite,550 bhn,for ahp-i ( hydrostatic test pressure at shop: 9 kg per sq cm (g). ), drain pit jet pump,ejector type # complete assy with water inlet elbow,pipe with flange,bolts and nuts and foundation bolts ( discharge rate of 35 # 50 cubic mtrs. / hour, horizontal distance of 150 # 160 mtrs with an elevation of 10 mtrs from gound level (0.00 mtrs), sump volume : 45 cubic mtrs. one no. orifice for discharge line with each of ejector jet pump is required with other accessories. ), ba hopper,feed sump/chute for bottom ash hopper, nozzle # of seal trough,for ba hopper,ahp-i# for ba hopper,ahp-i ( nozzle with holder. ), inspection window assembly looking glass dia 224 mm th 12 mm for ahp-ifor ba hopper, inspection window glass,200m # ( moc: borosilicate glass. ), shaft sleeve for clinker grinder for make-ucc/dcips,pno. 15 moc ss 410, 350 bhn, for ahp-i, cambolt,nut,locknut # moc-ss 410(cambolt) heat treated to rc 32-34,metric m 20 coarse a2-70,is 1363 (nut# for ba clinker grinder ( 1set=32 nos 1. moc: ss-420 (cam bolt) heat treated to rc 32-34. metric m20 coarse a2-70, is 1363 (nut). 2. 01 set: ), packing gland follower # moc: bronze ltb-2 is 318,for ahp-1 ( for ba excen crusher 1. part no.-12 2. moc: bronze, ltb:2 is:318 ), labyrinth ring of bearing housing moc-ms is 2062,for ahp-ifor clinker grinder,make-dcips ( for ba excen crusher 1. part no.-13 2. moc: ms is 2062 gr-a. ), chain # no of link-118,for ahp-i ( for clinker grinder of ahp-i. no of link: 118. ), small size sprocket for ahp-1 bktpp for gear box,for ahp-i, packing gland housing # moc: ci fg 220 is: 210,for ahp-i ( for ba excen crusher 1. part no.-9 2. moc: ci fg 220 is: 210. ), slinger for bottom ash crusher dcips moc-ms,is:2062 gr-a,drawing no 25p06-t-1b-582 ( for ba excen crusher 1. part no.-14 2. moc: ms is 2062 gr-a. ), cam for clinker grinder # heat treated & normalised for ahp-i# for moc:hi chrome alloy with 22% to 27% cr, gate face of feed gate # moc-ss 316 for ahp-i ( moc: ss - 316. including m12x65, csk hd soc. cap bolt, nut, washer. ), adjustable seating wedge # moc-ms,is:2062 gr-a for-ahp-i ( for feed gate. moc: ms, is: 2062 gr a. ), roller # moc-steel.is:1030 for-ahp-i ( for feed gate of ba crusher. moc: steel, is: 1030. ), gland follower for indicator rod dcips of feed gate, ahp-i, guide angle l.h # moc-ms,is:2062 gr-a for-ahp-i ( for feed gate ), guide angle r.h # moc-ms,is:2062 gr-a for-ahp-i ( for feed gate ), indicator rod # moc-s.s,size: 21mm dia.(solid) and 1400 mm long with both ends threaded and nuts,stg-i# for bottom ash hopper feed gate

corporations/Associations/Others

CTN :45214075

06 Jun, 2026 3.39 Lacs

Bokaro - Jharkhand

Tender For supply of nozzle tip for wetting head for fly ash handling system, 1 set- 20 nos. , fogjet nozzle tip of air washer for fly ash system , rubber hose pipe, size- 0.50 inch , hose flexible, size- 1 inch , flexible steel braided rubber hose, size- 0.75 inch