Latest foundation plate Tenders | Government foundation plate Tenders

CTN :45304567

08 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od b g.i pipe. seat rest pipe 42 mm od b class g.i pipe. handl

CTN :45264310

08 Jun, 2026 NA

Thiruvananthapuram - Kerala

Tender For supply of various items to university press - various items, blanket (inner) demy (540x647 gx1.7mm) (bullock), blanket (inner) d/dy (935 g x 780 x 1.7 mm - 3 ply) (bullock), blanket (outer) demy 605x652 g x1.95mm (bullock), blanket (outer) d/dy 940 g x 840 x 1.95 mm - 4 ply (bullock), copier paper, a4 21 x 29.7 cm, 80 gsm (500 sheets per packet) (jk, sparkle), copier paper, a3 42 x 29.7 cm, 80 gsm (500 sheets per packet) (jk, sparkle_, dampening hose 210 mm white, cotton (anand bracelit), dampening hose 190 mm white, cotton (anand bracelit), dampening hose 170 mm white, cotton (anand bracelit), metal halide lamp 3 kw,printing down frame use (theimer th 3020), econowash kr for blanket & roller (technova), novatone developer p for ps plates, (technova), ink reducer for offset ink (technova), numbering machine 6 digit binding purpose (technova), offset printing ink (colour) 4 colour process (technova), offset printing ink(black) single colour (baby black), plate cleaner for ps plates, technova, rexine binding purpose (fine quality), stapler pin 24/6 [each box having 20 small boxes inside it] (kangaroo), straw board (yellow) 25 x 30", 1.5 lb (24 oz) (fine quality), thinner printing purpose (sheenlac), hot melt glue superbond adhensive hot melt (pidilit sa 4777), tampain pad plate making purpose (fine quality), colour card (pink, blue, green, yellow) 300 gsm (4 color) (fine quality), parchment paper 80 gsm (3 color) (different colour), white card 270 gsm (jk), sponge 30x120x10 mm (viscos (original))

CTN :45201275

29 May, 2026 11.76 Lacs

Parganas - West Bengal

Tender For the strengthening of base plate for supporting motor stool for preventing motor vibration of 9 nos of pump including painting at fore bay bridge at 3rd additional chowbhaga pumping station and chowbhaga pumping station old within kmc area ps chowbha

corporations/Associations/Others

CTN :45277495

28 May, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

CTN :45235943

26 May, 2026 1.03 Crore

Usmanabad - Maharashtra

Tender For design, fabrication, supply, erection, testing and commissioning double girder eot crane of 50 10 mt of pump houseincluding foundation plate anchorages, transportation, loading, unloading, levis, taxes etc. all complete job for krishna marathwada

State Government

CTN :45216704

23 May, 2026 NA

Nagpur - Maharashtra

Tender For 26/27 1call/supply of electricals item rate material suppliers at gp jamtha ps ngp - construction items :, complete led street light fitting 36 wat bajaj, complete led street light fitting 45 wat bajaj, complete led street light fitting 90 watt bajaj, complete led street light fitting 100 watt bajaj, complete led street light fitting 50 watt bajaj, complete led street light fitting 60 wat bajaj, complete led street light fitting 45 watt sayska, complete led street light fitting 36 watt sayska, complete led street light fitting 90 watt sayska, complete led street light fitting 100 watt sayska, complete led street light fitting 50 watt sayska, complete led street light fitting 60 watt sayska, complete led street light fitting 45 watt orient, complete led street light fitting 36 watt orient, complete led street light fitting 90 watt orient, complete led street light fitting 100 wattorient, complete led street light fitting 50 watt orient, complete led street light fitting 60 watt orient, complete led street light fitting 45 watt philips, complete led street light fitting 36 watt philips, complete led street light fitting 90 watt philips, complete led street light fitting 100 watt philips, complete led street light fitting 50 watt philips, complete led street light fitting 60 watt philips, led holder, led street light fitting bracket pipe, clamp cement pole, clamp iron pole, tep roll, 1.5 mm flexible wire, 2.5 mm flexible wire, bracket pipe 3/4", alluminium wire 2.5 mm, alluminium wire 4 mm, cable isi 2 core copper 2.5 mm, cable isi 3 core copper 4 mm, 1/18 alluminum wire, 1/18 copper wire, alluminium cable 2 core isi 4 mm, alluminium cable 4 core isi 4 mm, alluminium cable (service wire) 4 mm, alluminium cable (service wire) 6 mm, alluminium cable (service wire) 10 mm, alluminium cable (service wire) 16 mm, wire 1.0 sq mm polycab, wire 1.0 sq mm syska, wire 1.5 sq mm polycab, wire 1.5 sq mm syska, wire 2.5 sq mm polycab, wire 2.5 sq mm syska, wire 4 sq mm polycab, wire 4 sq mm syska, 20 watt led bulb isi hpl, 20 watt led bulb isi bajaj, 23 watt led bulb isi syska, 23 watt led bulb isi bajaj, 30 watt led bulb isi syska, 30 watt led bulb isi bajaj, 36 watt led bulb isi syska, 36 watt led bulb isi bajaj, 40 watt led bulb isi syska, 40 watt led bulb isi bajaj, 45 watt led bulb isi syska, 45 watt led bulb isi bajaj, 60 watt led bulb isi bajaj, 100 watt led bulb isi syska, 60 watt led bulb isi syska, 100 watt led bulb isi bajaj, main switch 16 amp 1 phase, main switch 32 amp 1 phase, main switch 63 amp 3 phase, main switch 32 amp 3 phase, 2 pole isolator 40 amp, 2 pole isolator 63 amp, 2 pole isolator 100 amp, kit kat 63 amp with isi, kit kat 32 amp with isi, kit kat 16 amp with isi, led light choke 30 watt, led light choke 45 watt, led plate 30 watt, led plate 45 watt, led t-5 20 watt, starter panel c & s 14 amp, starter panel c & s 23 amp, three kot cable copper, kat-out, complete tube light filips/crompton, starter bajaj isi, ciling fan bajaj, kesing patti, meter peti, timer, insullation tape

corporations/Associations/Others

CTN :45236853

25 May, 2026 2.65 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in leisure valley, sector 10 a, ward no. 2, chandigarh under mplads. ln/mp18047/2024-2025/116. - providing and fixing of chest press double complete in all respects having following specifications. size / dimensions length -1200 milimeter width- 700 milimeterheight 1800 milimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometer warranty - 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars complete in all respects having following specifications.size/dimensions length- 900 millimeter height 800 millimeter material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the vertical or standing pipes shall be 40 mm nb with a thickness of 2.9 mm, and the horizontal pipes shall also be 40 mm nb with a thickness of 2.9 mm. the foundation pipe shall consist of a gi pipe anchored 500 mm deep and supported with a mild steel (ms) angle of 25 25 4 mm. the nominal bore of the foundation pipe shall be 40 mm nb with a thickness of 2.9 mm. the ms foundation plate shall have a minimum thickness of 12 mm. all nuts and bolts used for assembly shall be made of stainless steel to provide durability and resistance to corrosion. the open ends of all pipes, bearing bushes, and bases shall be fitted with fibre-reinforced plastic (frp) caps having a minimum thickness of 2 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance under outdoor conditions.colour:- paint finish- power coated, uv resistant paint coating thickness (min) 80 micrometer warranty - 3 years. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of three wheel shoulder builder/ arm wheel- outdoor gym equipment complete in all respects having following specifications. size / dimensions height of central pole from ground -1524 millimeter outside diameter of first wheel - 850 millimeter outside diameter of second wheel - 800 millimeter outside diameter of third wheel - 650 millimeter height of first wheel from ground - 1220 millimeter height of second wheel from ground - 1200 millimeter height of third wheel from ground - 1180 millimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure quality

corporations/Associations/Others

CTN :45225596

30 May, 2026 20.68 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of frame plate liner insert stud plus nuts,part no.6, material- enb zinc plated , set screw mechanical seal, part no.21, material-aisi 316 , adjusting screws and nut and washer, part no.15, material-ms zink plated , clamp bolt, part no.3 material-ms zink plated , clamp washer, part no.2 material ms zink plated , cover plate bolt and nuts, part no.27, material- en 8 , discharge joint ring, part no-10, material- synthetic rubber , frame plate bolt plus nuts, part no.20, material- is 1363 , frame plate liner insert, part no.8, material-hichrome , impeller, part no.9 material- hichrome , intake joint ring, part no.14material-synthetic rubber , keeper plate, part no.29, material-ms zink plated , mechanical seal, material- mod ps 4.625 inch , o ring for impeller, part no.24, material- synthetic rubber , o ring for sleeve, part no.4, material- synthetic rubber , oil breather, part no.30, material- ms , seal adopter, part no.23 material- hichrome , seal ring, part no.7 material-synthetic rubber , shaft sleeve, part no.5, material-astma743 cf8m , tapper roller bearing-6535-6580, part no.1 material-steel , throat bush, part no.11, material-hichrome , volute liner seal, part no.25, material-synthetic rubber , volute liner, part no.26, material- hichrome

CTN :45045982

21 May, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of lv7 av 15 278 003 109 852 43 pin of planet wheel , lv7 av 15 578 003 914 352 28 rope sling 4x 1600kg , lv7 av 15 578 903 913 252 28 front suspension , lv7 av 15 273 112 490 541 1 manzeta 55x56 , lv7 av 15 548 241 371 523 94 metal hose clip , lv7 av 15 358 143 401 120 switching unit 101 000 011 001 , lv7 av 15 309 251 000 610 screw m6x10 , lv7 t 815 8x8 485 sk 00117 complete wire harness for hyd portion c , lv7 t 815 12x12 990 100 941 0 injector body cv 28305 15 , lv7 t 815 8x8 2520 72 0306146 yoke universal joint vehicular 130 073 5 , lv7 t 815 8x8 130 076 857 734 tube assy metal 130 076 857 734 , lv7 t 815 8x8 5360 72 0136032 spring helical compression , lv7 t 815 8x8 442 078 742 354 rear cover sheet rh , lv7 t 815 8x8 990 100 953 000 bandwheel 163100142 , lv7 t 815 8x8 130 954 166 24 tools box gasket , lv7 t 815 8x8 130 987 960 144 upper step board rh , lv7 t 815 8x8 130 987 960 134 upper step board lh , lv7 t 815 8x8 272 512 321 000 upper carpet , lv7 t 815 8x8 323 427 150 053 bush ps 1220 ku 14x12x12 , lv7 t 815 8x8 442 054 471 534 clamp , lv7 t 815 8x8 442 076 691 664 switch coupling , lv7 t 815 8x8 273 111 077 000 bent rubber tube , lv7 t 815 12x12 130 028 969 254 control valve holder , lv7 t 815 8x8 443 317 069 109 pump signal lamp , lv7 t 815 8x8 321 821 202 025 protective glass orange , lv7 t 815 8x8 443 612 445 806 1 air reservoir 10l , lv7 t 815 8x8 442 053 990 424 guide insert , lv7 t 815 8x8 273 111 010 014 sealing ring 8x4 csn 0292800 od 35 501v , lv7 t 815 8x8 273 511 136 000 silent blosk 646 csn 63581311612 , lv7 t 815 4x4 207 310 048 4 intermediate lever , lv7 t 815 4x4 443 400 320 000 wind screen electric motor 8tw 005 , lv7 t 815 hmv 207 285 053 4 pair of glass lh , lv7 t 815 hmv 442 072 801 014 front bracket lh , lv7 t 815 hmv 442 072 801 004 front bracket rh , lv7 t 815 hmv 273 111 530 000 rubber bushing , lv7 t 815 hmv 442 050 330 164 insert , lv7 t 815 hmv 442 600 559 000 spring plate , lv7 t 815 hmv 205 069 069 4 ring , lv7 t 815 hmv 336 641 000 000 hose ab 309 8x600dkl dkl pm 21 310 , lv7 t 815 hmv 990 600 313 000 electromagnet 24v , lv7 t 815 hmv 442 170 535 029 trg aggr clutch disc zvs , lv7 t 815 hmv 558 106 750 6 mmu 17401 set up gauge , lv7 t 816 10x10 802 823 010 4 padel arm , lv7 t 816 10x10 443 414 011 0 thermometer cummins , lv7 t 816 10x10 993 100 317 0 hose clip din 3017 b2 134x20 w1 2 , lv7 t 816 10x10 1028207a display , lv7 t 816 10x10 1019922 selector range , lv7 pinaka lcr 944 192 o ring exhaust , lv7 pinaka lcr 105026 bearing garlock , lv7 pinaka lcr 115 003 throtle cable , lv7 pinaka lcr 910 314 pump seal kit , lv8 pinaka lcr til 960884 o ring , lv8 pinaka lcr til x 7750000053 relay model 24v 8ch phonix pc 24d 08 cob , lv8 pinaka lcr til 960882 backup ring , lv8 pinaka lcr til 960886 o ring , lv8 pinaka lcr til 960 883 o ring , lv8 pinaka lcr til 0102030000 rail rv 8050 mm , lv8 pinaka lcr til z 7872000175 switch toggle t 7 on off on mom , lv8 pinaka lcr til 109 200 063 547 command post shelter tarpaulin cover , lv8 pinaka lcr til 960887 o ring , lv8 pinaka lcr til z 7754000026 bsp thread elastic seal ed 3 4 , lv8 pinaka lcr til z 7872000174 toggle switch , lv8 pinaka lcr til 902000157 de spanner 25 32x7 8 , lv8 pinaka lcr til 902000156 de spanner 5 16x13 32 //bid details 2 / 53 pinaka lcr til 902000156 de spanner 5 16x13 32

State Government

CTN :45191713

20 May, 2026 NA

Bhubaneswar - Odisha

Tender For quotation for jk double demy map litho 16 kg.(white) , jk double demy map litho 20 kg.(white) , jk double demy map litho 21.3 kg.(white) , jk double demy map litho 24 kg (white) , jk double crown 11.6 kg.(white) , jk double fullscape 7.9 kg (56 gsm) , jk double demy glossy 90 gsm (white) , jk double demy glossy 130 gsm (white) , jk double demy glossy 170 gsm (white) , jk double demy glossy 210 gsm (white) , jk double demy glossy 250 gsm (white) , jk double demy glossy 300 gsm (white) , jk double crown glossy 130 gsm (white) , jk double crown glossy 170 gsm (white) , jk double crown glossy 210 gsm (white) , jk double crown glossy 250 gsm (white) , jk double demy mat finish paper (100 gsm) , jk double demy mat finish paper (130 gsm) , jk double demy mat finish paper (170 gsm) , jk double demy mat finish paper (210 gsm) , jk double demy mat finish paper (250 gsm) , jk west coast colour paper (160 gsm) , jk west coast colour board (160 gsm) , jk ivory card , jk a4 paper red (white) , jk a3 paper red (white) , jk pitch board (straw) , jk plastic coated (double demy) , cox board , fly leaf (brown paper) , jk conquest paper , rubber blanket (36" x 25") , ultra found , posi flash plus , book black ink , royal blue , gloria red , brown , yellow , vivid green , white , orange , peacock blue , four colour ink set , tracing paper a/3 , tracing paper a/4 , tracing paper legal , swell , p.s. plate (510 x 720) , sponge , g.p. plate cleaner , damping cloth (150 mm) , delete , aerobic gum , dryer , dense plus , benzene , phosphoric acid , tek reducer , p.s. developer , cello tape , brush , tuli , a3 paper (75 gsm) , a3 semi gloss (100 gsm) , 12" x 18" (130 gsm) , 12" x 18" (170 gsm) , 12" x 18" (220 gsm) , 12" x 18" (250 gsm) , 12" x 18" (300 gsm) , 12" x 18" texture paper (300, 250, 200 gsm) , 13" x 19" (300 gsm) , 13" x 19" texture paper (300, 250, 200 gsm)

Foundation Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government