Latest garland Tenders | Government garland Tenders

CTN :42409870

03 Nov, 2025 14.73 Lacs

Kanpur - Uttar Pradesh

Tender For supply of tea leaf box 1kg,sugar 1kg packet,milk amul 1l full cream,coffee 200gm pouch,green tea 50pieces box,snacks packets,sandwidch,veg meal lunch,special lunch veg or non veg,cold beverages 250ml,mineral water bottle 500ml,assorted cookies packet 450gm,biscuit packet 200gm,salted cashew packet 200gm,salted peanut packet 200gm,namkeen navratna mixture 1kg packet,lpg cylinder 19kg refill,flower garland for puja,news paper,magazines,tissue paper packet 100 pcs,tissue paper box 100 pcs,toilet cleaner 1l bottle,handwash 2l pouch,dishwash bar 300gm,detergent powder 500gm,room freshner spray 200ml,toilet freshner pack 50gm,sapling plant with earth pot,award for dealers

CTN :42305309

25 Oct, 2025 NA

Kolkata - West Bengal

Tender For supply ofreplacement of ceremonial light garland ncm bg : : - replacement of ceremonial light garland _replacement of ceremonial light garland with led based garland. following activity to be performed by the firm , replacement of ceremonial light garland _replacement of ceremonial light garland with led based garland. following activity to be performed by the firm- , certificate of conformity and warranty certificate , certificate of conformity and warranty certificate- , certificate of conformity and warranty certificate.

State Government

CTN :42310796

30 Oct, 2025 1.65 Crore

Bangalore - Karnataka

Tender For repair and reconstruction of damaged r & r work of garland drain no - 08 & retaining wall no - 08 and silt settling tank no.1 & 4, construction of new retaining wall and garland drain at dump ptd-1 (now existing dump), subbarayanahalli iron ore mine, sandur, karnataka

CTN :42075246

18 Oct, 2025 1.08 Crore

Kishtwar - Jammu And Kashmir

Tender For establishment of s.c work at gwar kishtwar - fencing:- clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared, earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be leveled and neatly dressed , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level: 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size), steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works., fencing with angle iron post placed at required distance embedded in cement concrete blocks, every pole concree, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 4 horizontal lines and 2 diagnols of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with g.i. staples, turn buckles etc. complete. (cost of posts, struts, earth work and concrete work to be paid for separately). payment to be made per meter cost of total length of barbed wire used. with g.i. barbed wire, steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. . (stair), sign board incl carriage painting &writing complete job. os size: 5.00 x 3.00 ft with vertical iron angle 2 nos of size 40x40x6 mm iron angle of height 7 ft with 1 mm thick m.s sheet includng all leads lift carriage complete job, carriage of sand 200 mtr hl, carriage of bajri 32 km mt and 9.62 km hl, carriage of steel 47 km mt and 9.62 km hl, carriage of cement 47 km mt and 9.62 km hl, plantation :- planting of polybagged plants in staggered pit of size 45x45x45cm including cost of plant, planting of naked root saplings in staggered pit of size 45x45x45cm including cost of plant, planting /sowing of grasses/ seeds in patches, planting of medicinal plants and shrubs, drsm :- excavation of foundation for drsm structures.collection of stones from different sites and their dumping.carriage of stones from dumping site to work site through head load.fashoning and dressing of stones using hammers.construction of structures along the gullies/sliding zones.numbering of structures by using paint properly. (deduction 10% voids), crate :- excavation work in excavation by manual means for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts wells cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 m including the disposal of excavated earth upto 1 m from the cutting edge, disposed earth to be levelled and neatly dressed in all kinds of soil., hand-packing stones in wire-crates; excluding cost of crates and stones, supply of stones for wire-crates, filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m an

corporations/Associations/Others

CTN :42273540

10 Nov, 2025 2.09 Crore

Donimalai - Karnataka

Tender For construction of gabion toe wall and garland drain at ad 1 of kiom 2026 27 under r and r work

corporations/Associations/Others

CTN :42233625

07 Nov, 2025 82.80 Lacs

Donimalai - Karnataka

Tender For construction of loose boulder gabian toe wall and garland drain at pd-3 3w and ad-2 dump foot, diom under r andr work

CTN :42252191

17 Oct, 2025 1.11 Lacs

Salanpur - West Bengal

Tender For cleaning & cutting of garland drain at south side transporting road & near kashidanga electrical substation at g.beginia colliery under salanpur area.

CTN :42188159

07 Nov, 2025 10.00 Lacs

Shahdol - Madhya Pradesh

Tender For 1137/annual tender for rent of tent material (per day) - beam pandal 15x15 square feet , beam pandal 15x15 square feet , waterproof pandal 15x15 square feet , pipe pandal 15x15 , flower gate 12x15 , curtain 10x15 , light garland and large lights , color lights , between mats , dari 8x10 , mat 15x30 , foam mattress , print bedsheet , white bedsheet , pillow , carpet 5x30 , wooden table 2.5x5 , tin table , center table steel , center table glass , center table fiber , steel sofa , steel sofa , wooden sofa , chair fiber , chair steel , chair cover , craft 3x6 , craft 4x8 , switch box , loud speaker , sound system , 2 boxes, 1 amplifier 2 microphones , generator with 9 watt diesel , gul dasta , flower garland , pipe 12 , pipe 15 , pipe 17 , stage ladder , small cooler , large cooler , pekha , ferrata , drum 700 litres , led screen 10 x 10 with operator for broadcasting , third party equipment (third party equipment) , third party equipment (third party equipment) , double party equipment (third party equipment) , third party equipment (third party equipment) , 4 stage equipment (third party equipment) , five stage equipment (third party equipment) , any branch

CTN :42203175

06 Nov, 2025 19.77 Lacs

Santaldih - West Bengal

Tender For cleaning jungles, cutting long grasses, bushes, shrubs, dry trees etc. from different areas inside and outside of plant premises of stps

State Government

CTN :42164968

29 Oct, 2025 NA

Vadodara - Gujarat

Tender For supply of various size and types of conveyor belt carrying, impact & return rollers for chp & lhp at gtps, utps, stps, kltps, bltps, wtps and wtps-8 through annual rate contract order basis - carrying roller 114.3x200 mm for mrc 3,4,5, impact roller 165x200 mm,for mill reject conveyor :3,4and5, return roller 114.3x600 mm for mrc 3,4,5, carrying roller 139.7x315 mm for con.5,6,7,8,10 ab, impact roller 165x335 mm for con. 5,6,8,10 ab, return roller 114.3x950 mm,for 800 mm belt, carrying rollar 139.7x380 mm for con.2ab, impact roller of size 165x405 mm long for conv.2ab, return roller 114.3x1150 mm for con.2ab, troughing roller 152.4x465 mm (carrying roller), impact roller 190x465 mm for 1200 mm belt, return roller 152.4x1400 mm, troughing roller 152.4x530 mm (carryingroller), impact roller 190x530 mm for 1400 mm belt, return roller 152.4x1600 mm, heavy duty return roller 152.4x1400 mm, carring and return roller114.3x2400 for dribble con, frame for carrying rollers (ti) size 114.3 mm dia.x200 mm length., t i roller stand for belt 800 mm, t i roller stand for belt 1000 mm, t i roller stand for belt 1200 mm, t i roller stand for belt 1400 mm, impact roller stand for belt 1200 mm, impact roller stand for belt 1400 mm, self alignment t i roller stand for 1000 mm conveyor belt, self alignment return roller stand for 1000mm conveyor belt, self alignment t i roller stand for 1200 mm conveyor belt, self alignment return roller stand for 1200 mm conveyor belt, self alignment return roller stand for 1400 mm conveyor belt., self alignment t i roller stand for 1400 mm conveyor belt., ims belt -1 to 6 drive pulley size 660mm x 1250mm x 55mm, ims belt -1 to 6 end pulley size 660mm x 1250mm x 55mm, head end non drive pulley shaft dia 140mm, bearing dia 125mm,pulley dia 500mm, length 1400 mm for conv 18 ab tripper trolley, tail pulley having size 400 dia. x 1400mm face width, shaft dia. 120 mm.(bearing dia. 100 mm) with rubber lagging and bearing block but without bearing. drg. no. ko 1999/4 m/c no. co /1141/18 ab-, bend pulley having size 400 dia x 1400 mm face width shaft dia. 140 mm (bearing dia 125 mm) with rubber lagging and bearing block but without bearing mc no co/1141/13, snub pulley 110 mm shaft dia, bearing dia 100 mm, pulley dia 500 mm length 1400 mm for conveyor 16 ab and 17 ab, tail pulley having size 500 dia. x 1600 mm face width, shaft dia. 130 mm.(bearing dia. 115 mm) with rubber lagging and bearing block but without bearing. m/c no. co /1141/11 ab, tail pulley having size 400 dia.x1600 mm face width, shaft dia. 110 mm.(bearing dia. 90 mm) with rubber lagging and bearing block but without bearing. m/cno.co/1141/26 ab (for belt feeder 1 and 2, gravity bend pulley 800x1150 mm,shaft dia-115 mm, garland type carrying roller set of three nos. fitted with clamp, garland type return roller set of two nos. fitted with clamp, heavy duty return roller 152.4x1600 mm

Garland Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government