Latest glass sleeve Tenders | Government glass sleeve Tenders

Central Government/Public Sector

CTN :45237791

20 Jun, 2026 NA

Patti - Punjab

Tender For bid to ras supply of clutch disc , clutch pressure plate , assy clutch release beraing , pilot bearing , gear shift lever assy , drive shaft top gear shaft , cylinder roller bearing , roller gauge drive shaft needle bearing , coller bush 4 th gear , needle gauge 1 st and 2 nd gear , needle gauge 3 rd and 4 th gear , sinchro cone 2 nd and 3 rd and 4th and 5 th gear , engaging gear 2nd and 3 rd speed , shifter sleeve 2 nd and 3 rd gear , sinchro ring 3 rd gear , sinchronising cone 1 st gear , retention spring , carrier , deep groov ball bearing , spacer thk 3 point 65 and 3 point 85 and 4 , tapper toller bearing counter shaft , shim counter shaft , gear box gasket set comp , shim main shaft , ptfe seal main shaft front oil sal , ptfe seal main shaft rear oil seal , hex nut main shaft , assy universal joint steering , steering spindle bottom , assy sleeve steering , clutch sleeve cylinder lower , propeller shaft u j cross , propeller shaft nut and bolt , propeller shaft bolt lock patti , w d 40 dust spray ) /bid number : gem/2026/b/7553459 * /dated: 18-05-2026 & & / bid document 1 / 27

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

Central Government/Public Sector

CTN :45604881

29 Jun, 2026 NA

Yamunanagar - Haryana

Tender For supply of hand brake shaft with standard washer and m-27 nut, sleeve & rivet 10 dia. drawing no. :- contr-9405-s/12, alt-10, item no-2,16 &19. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government / Public Sector

CTN :45449676

29 Jun, 2026 NA

Digboi - Assam

Tender For corrigendum : supply of item 10 shaft sleeve pn 18 cw pump , item 20 sleeve nut lock nut nde pn 05 cw pump , item 30 lock nut pn 38 cw pump , item 40 sleeve nut lock nut de pn 05 cw pump , item 50 oil seal de outr brg cover pn 39 , item 60 oil seal pn 45 cw pump , item 70 lock washer p n 37 cw pump , item 80 grub screw pn 19cw pump , item 90 gland half pn 30 cw pump , item 100 pump shaft pn 40 f 5822 500 400 , item 110 wrng rng casing pn 2 f 5822 500 400

State Government

CTN :45599690

21 Jun, 2026 NA

Rohtak - Haryana

Tender For rohtak town annual maintenance works for water supply. - repair of 50 hp horizontal pump set complete in all respect /repair of 50 hp horizental pump set including rematling of pump shaft making bearing sheet, impeller sheet, threading charges making of heavy duty gm sleeve, bronze chuck nut bearing, brass welding, ms chuck nut for impeller, greasing, mobil oil, opening and refitting with the help of chain pully, loading unloading and carriage charges / ex-post facto sanction for repair of 50 hp horizontal pump including rematling on pump shaft making bearing impeller seat & threading including making of heavy duty sleeve making bronze chuck nut, with heavy bearing seat with brass welding , greasing, glain dori, opening & refitting, loading, unloading, carriage complete job at jln canal for 2nd water works rohtak

State Government

CTN :45599694

21 Jun, 2026 NA

Rohtak - Haryana

Tender For rohtak town annual maintenance works for water supply - repair of 30 hp horizontal pump including rematling on pump shaft making bearing impeller seat & threading including making of heavy duty sleeve making bronze chuck nut, with heavy bearing seat with brass welding , greasing, glain dori, opening & refitting,loading,unloading,carriage complete job /repair of pump fitted with 30 hp horizontal motor / at jln canal for 2nd water works. rohtak

corporations/Associations/Others

CTN :45611373

03 Jul, 2026 22.04 Lacs

Jhansi - Uttar Pradesh

Tender For supply of lantern restrictor g11832c23 108ff ah , throat bush g8083 indure , frame plate liner insert for asp indure , bearing housing for asp 918321 , shaft sleeve ash slurry pump 108ff ah , shaft sleeve o ring 108ffah asp , pump shaft for asp 918321 , seal ring for ash slurry pump 918 321 , discharge seal ring for asp 918 321 , end cover for asp 918321 , impeller release collar for asp , stuffing box g073 g01 for asp , shaft spacer fam117e02 ash slurry pump , o ring for ash slurry pump

corporations/Associations/Others

CTN :45601972

02 Jul, 2026 25.01 Lacs

Bardhaman - West Bengal

Tender For supply of esp spares for dstps u2 overhauling d d - cerm shaft assy (1 set = shaft end 2 nos. + d 50 shaft 4 nos. + sleeve 4 nos. + set ring 4, nos.). esp type:- faa-10x 45h- 2x90140-2, for esp of 500mw. shaft-en-24, gd rapping shaft assembly for esp 500 mw (1 set = shaft end 1 no. + d50 shaft 2 nos. +, sleeve 2 nos. + set ring 2 nos) esp type:- faa-10x 45h- 2x90140-2, for esp of 500mw. shaft-, en-24, eerm vertical shaft assembly d-40 for esp 500 mw (1 set = shaft 3 nos) esp type:- faa-10x, 45h- 2x90140-2,for esp of 500mw. shaft-en-24, eerm d-50 shaft assembly for esp 500 mw(1 set =shaft 2 nos.+ sleeve 1nos. + set ring 2, nos. +key 1 nos.) esp type:- faa-10x 45h- 2x90140-2. for esp of 500mw. shaft-en-24, plain bearing,mat: c.i. gr-25 esp type:- faa-10x 45h- 2x90140-2, inner arm for cerm/eerm/gdrm outer arm hammers (2 half with all nuts and bolts;, flat - ms is 2062) esp type:- faa-10x 45h- 2x90140-2, outer arm for collecting rapping system, roller wheel- en-08, pin -en-24, arm and washer- ms is, 2062 esp type:- faa-10x 45h- 2x90140-2, outer arm for emitting rapping, mechanism, roller wheel- en-08, pin -en-24, arm and washer- ms is 2062esp, type:- faa-10x 45h-2x90140-2, pin wheel big for eerm 500 mw, material:c-45 & pin-en-24 esp type:- faa-, 10x 45h- 2x90140-2, pin wheel small for eerm 500 mw mat: plate (ms, is 2062), round teeth (en-24), esp type:- faa-10x 45h- 2x90140-2, shock pad, en-24 esp type:- faa-10x 45h- 2x90140-2, thrust pad (of thrust bearing) for eerm esp type:- faa-10x 45h- 2x90140-2, material: en-, 24, set ring, material: en-8 esp type:- faa-10x 45h- 2x90140-2, thrust bearing for eerm, esp type:- faa-10x 45h- 2x90140-2, material: en-24, seam for plain bearing adjustment(2 mm) esp type:- faa-10x 45h- 2x90140-2, round cross section. non asbestosrope of size 8 sqmm fors ealing/packingpurpose. capcity upto 250, degree celsius, square cross section. non asbestos rope of size 25 sq mm for sealing/packing purpose.capcity upto, 250 degree celsius, guide angle 75x50x6mm for esp shock bars, length 5000mm, u slot at 300mm is2062 e250a esp, type:- faa-10x 45h- 2x90140-2, m12×50mm hex head ht bolt and nut with washer for esp, high tensile hexagonal bolts (metric thread) and nut with washer, size- m16 x 50 (full, threaded) bolt grade- 10.9 as per is:1367 nut grade- 10 as per is:1367, high tensile hexagonal bolts (metric thread) and nut with washer, size- m16 x 100 (full, threaded) bolt grade- 10.9 as per is:1367 nut grade- 10 as per is:1367

Central Government/Public Sector

CTN :45601539

03 Jul, 2026 NA

Guna - Madhya Pradesh

Tender For supply of power water pump : : - casing , moc-a20 , part no.-1 , model- chp-st 3xi.5-6(sr. no.-69122) , p-1805 , bearing frame , moc- ci , part no.-19 , model- chp-st 3xi.5-6(sr. no.-69122) , p-1805 , shaft , moc- ss316 , part no.-6 , model- chp-st 3xi.5-6(sr. no.-69122) , p-1805 , shaft sleeve , moc- a20 , part no.-6 , model- chp-st 3xi.5-6(sr. no.-69122) , p-1805 , back pullout assembly in a20 shaft/sleeve in ss316/a20 with 21t7ga seal , model- chp-st 3xi.5-6(sr. no.-69122) , p-1805 , casing , moc-ss316 , part no.-1 , model- chp-st 3x1.5-8(sr. no.-15463) , 08-p-11 , impeller , moc- ss316 , part no.- 2 , model- chp-st 3x1.5-8(sr. no.-15463) , 08-p-11 , bearing frame , moc- ci , part no.-19 , model- chp-st 3x1.5-8(sr. no.-15463) , 08-p-11 , shaft , moc- 4140 , part no.-6 , model- chp-st 3x1.5-8(sr. no.-15463) , 08-p-11 , shaft sleeve , moc- ss316 , part no.-14 , model- chp-st 3x1.5-8(sr. no.-15463) , 08-p-11 , back pullout assembly in ss316 shaft/sleeve in 4140/ss316 gland packed arrangement , model-chp-st 3x1.5-8(sr. no.-15463) , 08-p-11

Central Government/Public Sector

CTN :45601782

29 Jun, 2026 NA

Guna - Madhya Pradesh

Tender For supply of spares for pump - ss plunger , moc- ss 304 , hard chrome plated , drg.no. nfv/a/m-130 , p-1701 , plunger p-1702 , moc- ss 304 , hard chrome plated , dimensions as per the drawing attached , shaft for p-2503 , moc- atsm a276 gr.316 , dimensions as per the drawing attached , impeller shaft trench pump cp1003 , moc- astm a276 gr.304 , dimensions as per the drawing attached , head shaft trench pump cp1003 , moc- astm a276 gr.304 , dimensions as per the drawing attached , shaft p1 dewatering pump , moc- astm a276 gr.304 , dimensions as per the drawing attached , shaft sleeve for p1 dewatering pump , moc- astm a 276 gr.304 , dimensions as per the drawing attached , owc system shaft along with keys & nuts , moc-astm a276 gr. 316 , dimensions as per the drawing attached

Glass Sleeve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors