Latest gusset plate Tenders | Government gusset plate Tenders

Central Government/Public Sector

CTN :45739663

15 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For 3008507 sh/pl, cheq pl, 900 x 5000 mm, 8mm , 3026918 - chequered plate 10mm thick , 3008624 - sh/pl, ms, 1000 x 6000 mm min, 50mm

Central Government/Public Sector

CTN :45731254

09 Jul, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of lifting tackle for bg locomotive wheel set assembly with bull gear, as per rdso drg. no. skdl- 4511 alt-1 or latest. set consisting of (1) base plate, qty- 01 no. (2) gusset plate, qty- 04 nos. (3) ms flat (30 x 10 mm thick), qty- 02 nos. (4) strengthening plate, qty- 02 nos. each set consists of 04 items 09 nos only. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45710554

08 Jul, 2026 NA

Haridwar - Uttarakhand

Tender For x/6620/2026/0341b/1 cutting of plates - gusset plate1, gusset plate2, gusset plate3, gusset plate4, gusset plate5, gusset plate6, gusset plate7, gusset plate8, gusset plate9, gusset plate10, gusset plate11, gusset plate12, short support plate1, short support plate2, long support plate1, long support plate2, short support plate3, short support plate4, long support plate3, long support plate4, support1, support2, plate, end plate1, end plate2

Central Government/Public Sector

CTN :45733184

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)

Central Government/Public Sector

CTN :45710527

08 Jul, 2026 NA

Multi City - Haryana

Tender For auction sale of depot ferrous scrap - scrap heavy-sheet of foot plate, gangway bridge, fall plates, gusset plate and heavy sheet (mixed material)of sorts and sizes with or w/o attachments us and ur. loc- lying at bin no. c-46 in scrap yard judw. remarks-(1)loading by purchaser. (2)private road crane allowed for loading purpose only. note- ferritic steel will be taken back if found in lot at the time of delivery.

State Government

CTN :45705895

30 Jun, 2026 NA

Pinjore - Haryana

Tender For cement plaster (in fine sand) 15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand) ,steel door/ window frames and shutters providing and fixing 1mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 1. using m.s. angels 40x40x6 mm for diagonal braces, sigle/built-up steel/tubular sections steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete,cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level a,brick work brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 1. cement mortar 1:4 (1 cement : 4 coarse sand)

Central Government And Public Sector

CTN :45704062

06 Jul, 2026 5.16 Lacs

Darbhanga - Bihar

Tender For supply of modernization of distribution infra 2x400 kva substation companybagh b b -dismantling and refurbishing of electrical distribution system , itc of existing load bank with static meter , itc of existing load bank , trimming and pruning of four trees , transportation of one dismantled lt panel darbhanga to mzp , removing of old faulty outlived mv panel , provision of structural iron channels mounting framework for the lt panel , re-furbishment of existing mv panel , brickwork for minor structural alterations near the lt panel support base , straight through joint 185 , straight through joint 50 , removing and relaying of existing cement interlocking bricks , laying of 1.1 kv grade of 35 sqmm to 185 sqmm direct in ground , dressing of cables , finishing of the lt bus bar box , 20w surface-mounted led tube light , a. horizontal type tpn db 8 way with double door , b. horizontal type tpn db 8 way single door , a. vertical type, 415 v, tpn db 8 way double door , dressing of dbs , a. single pole mcb 6 to 32 a , b. four pole isolator 63 a , c. four pole isolator 40 a , d. double pole isolator 40 a , e. tp mcb 63 a , f. 125 a tp mccb 16 ka , 3 pole mccb of 250a, 25 ka , itc of existing lt bus bar box , sitc wall mounted heavy-duty air circulators fans of 600mm metal blades , supplying and fixing of 5mm thick m.s.chequered plates , fixing of ms stand of pac outdoor unit , providing double coat spray painting , sign writting numbering on all panel proper marking of its connectivity , a. wiring for light point group-a , a. copper conductor, single core cable 2 x 1.5 sq. mm , a. medium class pvc conduit 20 mm , shifting re- installation of submersible pump staters , making opening of wall to suit the size of 380 mm sweep exhaust fan , supplying fixing of exhaust fan of 380 mm sweep heavy duty , a. blanking plate , b. 5 pin 15 a socket , c. 15 16 a piano type switch , d. 5 6 a piano type switch , e. 3 pin 5 6 a socket outlet , f. 3 pin 15 a top , g. wall fan , h. down rod for ceiling fan installation 3 ft length hook , a. 100 watt flood light , b. 24 w led rimless surface panel light , sitc of 100 a 3 phase neutral copper bus bar in sheet steel enclosure , dressing of existing distribution system of type ii staff qtr , itc of 100 a 3 phase neutral bus bar with 100 a mccb in sheet steel enclosure , supplying fixing of double pole spn mcb 32 a in the sheet steel enclosure , s l 2 1.5 sqmm copper conductor , removing the faulty lt cable of size 3.5 core 240 sq.mm , ms clamp on four pole structure for fixing the ht cable , extracting of spare main ht cable 11 kv 95 sq mm size from the soil , extracting of faulty spare ht cable 95 sq mm from the duct manual labour , fastners nut bolt, al lugs, socket, cu lugs socket, washers, screw, pvc clips , acrylic sheet of 2 mm thickness , hrc fuse of 200 a //bid details 2 / 49

Central Government/Public Sector

CTN :45702729

10 Jul, 2026 NA

Madurai - Tamil Nadu

Tender For auction sale of others - condemned, released & un-serviceable x frame angles gusset plate and rivets.-33.496mts.[ total-33.496mts] location-available at in front of sse/bri/mdu office. not for sale:-nil. note-[1] delivery to be made on ¿as is where is and actual weighment basis only.[2] in all cases, i.e. poclain/jcb//crane loading/ manual loading, the purchaser (by engaging his own labourers). cuttings are permitted to loadable sizes and hand over the non-ferrous (if any) and excess quantity to the custodian,[3]any other material in the lot other than the items earmarked for sale as per d.o. should be handed over to the custodian as nfs. s1539. udm lot no.089217-26-00053 dt.09.05.26 hsn code no. 72044900.

State Government

CTN :45341463

06 Jul, 2026 14.76 Lacs

Korba - Chhattisgarh

Tender For corrigendum : procurement of ms chequered plate for bmd-iii (ah&f), 1x500 mw, htps, korba west.

CTN :45666911

03 Jul, 2026 NA

Ambala - Haryana

Tender For supply of iron material m.s. plate is: 2062 e 250 br make: sail, m.s. channel is: 2062 e-250 br make: sail, m.s. angle is: 2062 e-250 br make: sail, m.s. beam is: 2062 e-250 br make: sail, m.s. chequered plate

Gusset Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors