Latest gusset plate Tenders | Government gusset plate Tenders

Central Government/Public Sector

CTN :45547055

01 Jul, 2026 NA

Nagpur - Maharashtra

Tender For supply of electric point machine rotary locking type, high thrust 220 mm throw,ac immunity 160 v ac,non trailable to operate on 110v dc completed with lock detector slides, cable termination box as per rdso specification no.irs: s: 24-2025 rev 3.0 or latest amendment. 1.the point machine and ground connections are as per drawing no. mentioned in rdso's letter no. sts/e/pm/220 mm vol-1 dated 23.5 2019. ground connection shall be as per rdso drawing no. rdso/s-3454 alt.-a consisting of (i) 1 in 8.5 turn outs bg 60 kg on prestressed concrete sleepers fitted with irs point machine ( 220 mm throw) for independent switch locking and clamp point lock (160 mm throw of point) with p bracket as per drawing no. rdso/s- 3454 alt.-a (ii) facing point bg switch extension bracket/insulation plate left hand and right hand as per drawing no. rdso/s-3591-3592-3593 (iii) facing point bg detector rod far end/near end as per drawing no.rdso/s-3594-95 (iv) facing point bg lock rod far end /near end as per drawing no. rdso/s-3596-97 (v) detector rod lug and lock rod lug as per drawing no. rdso/s-3598 (vi) special ms plate for s&t fittings on psc sleepers as per drawing no. rdso/t-3901 (vii) clamp type lock 60kg (tws)-bg-bolt special head as per drawing no. rdso/s/3599 alteration if any are applicable. one set of tools in a suitable tool box shall be supplied along with every 5 nos. of point machines consisting of (i) m6/m8/m18/m22/m20 box spanners (ii) m10/12 spanners (iii) adjustable wrench (iv) screw driver 300 mm long. 1:8.5 turnout. [ warranty period: 30 months after the date of delivery ] ]

Corporations And Associations And Others

CTN :45475995

17 Jun, 2026 NA

Batala - Punjab

Tender For contract for supply of cane cutting knives - csm ajnala, make: zuper/imco/tfipl cane cutter knives as per drawing no. acsm 61 for cutter length 465 mm, make: zuper/imco/tfipl tips for cane cutter/cane chopper knives. size 8" x 25 mm approximate weight 1.52 kg, csm batala, make: zuper/imco/tfipl hardened up to 45-48 hrc double edge cane cutting knives duly hard faced to be done by n6006 moc: is-2062e 250 br size:- 25x525x160 mm as per drawing no. m126_0266e, csm bhogpur, make:- imco/tfipl cane cutting knives duly forged & tempered made from shock resistance ms plate 25mm thick confirming to is - 2062. hardness 56-58 hrc/550 bhn, tensile strength - 65kg/mm, yield strength 50 kgf/mm elongation 20 % min with proper heat treatment to avoid breaking the knives as per drawing no. mh-0303-r2 with hard facing., make:- imco/tfipl cane cutting knives dully forged & tempered made from shock resistance ms plate 25mm thick confirming to is-2062. hardness-56-58 hrc/550 bhn, tensile strenght-65 kg/mm, yield strength 50 kgf/mm elongation 20 % min with proper heat treatment to avoid breaking the knives as per drawing no. mh-0303-r3 with hard facing., csm budhewal, make:- zuper/imco/tfipl cane cutting knives for cane cutter as per drawing no. ce/87-12 (duly hard faced) made from 25 mm thick ms plate grade is-2062 make sail, csm fazilka, make:- zuper/imco/tfipl cane cutting knives without hard facing as per drawing no. 310r, csm gurdaspur, make:- zuper/imco/tfipl chopper knives material - is: 2062 e250 br, tip will be both side hardened upto 45-48 hrc as per is 8461 drawing no. m125-m0255a both side hard facing to be done by n6006 electrode, make:- zuper/imco/tfipl cane leveller knives material- is: 2062 e250 br, tip will be both side hardened upto 45-48 hrc as per is 8461 drawing no. m125-m0256a both side hard facing to be done by n6006 electrode, csm morinda, make zuper/imco swing knife type cane cutter knives with domite tips as per our existing size and design, csm nawanshahr, make:- zuper/imco/tfipl cane cutting knives as per drawing no. m-350 with hard facing, csm nakodar, make: zuper/imco/tfipl cane cutting knives (machine finished) without hard facing as per drawing no. sm89-336-3m, make: zuper/imco/tfipl cane cutting knives (machine finished) without hard facing as per drawing no. sm89-337-3m

Central Government/Public Sector

CTN :45469120

24 Jun, 2026 NA

Malanjahknd - Madhya Pradesh

Tender For supply of wear plate thickness 12mm (8mm ms base plate+ 4mm hard facing for wear resistance) as per drg no -1

CTN :45469879

17 Jun, 2026 NA

Amritsar - Punjab

Tender For supply of clutch facing kit , clutch cyl assy , sleeve cyl assy , drive assy pinion , clutch plate assy , tie rod end , clutch release brg , magnetic solenoid switch

CTN :45448929

15 Jun, 2026 NA

Amritsar - Punjab

Tender For supply of door lock assy rh , door lock lh , pressure plate assy , clutch facing kit , clutch release brg , cable assy comp , brush carrier plate

Central Government/Public Sector

CTN :45386466

09 Jun, 2026 49.41 Lacs

Visakhapatnam - Andhra Pradesh

Tender For running maintenance of technological equipment in converter shop of sms-1.- repair of technological structures in converter shop, mixer discharge spout door rope changing, lance oxygen and water hoses replacement and hose shifting , lance guide minor structural repairs during operation, assistance in removal of lance from thimble socket, converter tilt drive lube oil topping up in lube tank, minor structural repairs of ferro alloy chutes, hoppers and bulk material chutes during converter operation, shifting of stc, sptc&sdc, various running repairs of stc, sptc, sdc, and sample&service car, lime fines screw feeder jamming rectification by cleaning, shifting of mobile equipments like debricking m/c during breakdown in front of converter., tap hole drilling m/c drill bit hard facing, telescopic hoist rope changing/portable repair during relining of converter, well mix pipe changing in l.p bay, steel teeming ladle bell crank lever bracket/ trunnion collar changing, steel teeming ladle bottom purging adapter plate fixing, hot metal tilter /steel teeming ladle resting bracket repair, various minor structural and other repairs like dart pipe centering, tip cleaning and device locking etc in slag cut off device.replacement of charging crane/ mixer crane tilter hook, assistance in shifting jack car and telescopic hoist, minor repairs of lance carriage balancer during operation of converter, minor repairs of lance foldable platform &lance stands, minor repairs of dog house & dog house doors during operation, hot metal ladle spout repair, lub pump changing in revamped converters, shifting, jam cutting and other minor repairs of lance assemblies.

Central Government/Public Sector

CTN :45400845

10 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - released ms scrap after dismantling of old roh shed consisting of columns, miscellaneous ms materials, rails 82 lbs, isa gusset plates, valley gutter etc. (weight as per ss 11=40.105 mts approx).

Central Government / Public Sector

CTN :45374516

16 Jun, 2026 NA

Krishna - Andhra Pradesh

Tender For auction sale of others - flt material : between kondapalli and krishna canal ; pl no:98050047( hsn code-72042910)-cond and u/s ms scrap of flt( flood light towers-25 nos, in staging condition) of different spans ( 1x22.86-18 nos, 1x15-07nos). consisting of main angles of sizes-110x110x10, 90x90x6, 50x50x5, bracing angles of sizes-45x45x5, 40x40x5, bottem base brasing angles(110x110x10 & 130x130x10) , top platform bottom support angles(50x50x5), plat form horizontal angles (50x50x5), plateform vertical angles ( 50x50x5), top horizontal angles(50x50x5), top plate(10 mm thick),plate form plate 6mm thick, ladder 50x10, flat, ladder rods, main angles joining angles inside 90x90x6, out side joint plate connecting main angles, intermediate horizontal anghes 45x45x5, top gusset plate 25mm thick, trapezoidal etc. all the flt material of the lot qty-49.91 mt ( approx). available at wagon depot ( opp 12t crane shed), through yard(km no; ty/139-ty/144, ty/111-ty/106, ty/96-ty/92, ty/234-ty/230), west central cabin( ty/14-ty/11), near ipf up/yd office( near dy/1048), in side dls,( near dls/1028), near f-cabin( dy/112a-dy/109), area control office,( dy/1035-1039), pf no-10(dy/1004-1003), at ryps,( 574/13-574/16), ki hut 1&2( 569/c10-c9, 568/c14-11), els pit , els @km( ls/22-ls/15, ls/74-ls/98), kcc station yard( 423/28-26, 423/32-34), scrap depo/ryp, opposite to old c- substation, k i-end old weighting bridge, main electrial sub station( back side), beside a-substation, opposite to stripping shop, beside btc pump house, back side of 03 ward, back side of cpoh /depo, opp paint shop). near air compresser room, under control of sse/br-ii/bza. cutting/dismantling is permitted for loading perpose. note- extreme saftey precations should be taken during cutting/dismantle the flts without any obstructing to the ohe and traks, while cutting the all flts safty measures should be followed, cut parts should be shifted approx 50-70 meters near to road side which are away from ohe lines. note: if any damage occur to rly while entire processes firm is the responsible for that damage. diismantling is permitted in power blocks, and traffic block only. delivery on actual weight basis only. all weights are obtained by the certified ds-8 by the custodian, ds no:0244660001. dt.18.05.2026. note: 2) cutting permited up to ground level only. purchaser shall prepare a dismantling action plan along with abundant safty precautions and same to be apporved by custodian before start of any dismantling . partial delivery may be permitted subject to full bsv payment of the complete lot. it will be the responsibility of custodian sse/br-ii/bza to facilitate required power & traffic block to complete the delivery of lot smoothly.for easy loading and tranpotation purpose, only after ensuring sufficient safty measures againt fire hazards etc to avoid any mishap to any mishap to any person, railway material etc.

corporations/Associations/Others

CTN :44090557

02 Jun, 2026 NA

Cuddalore - Tamil Nadu

Tender For bid to ras supply of st010240722 mill beater plate 70mm with hard facing outer plate , st010240721 mill beater plate 100mm with hard facing inner plate

CTN :45063789

01 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For bid to ras supply of cgi sheet 10 ft x 3 point 5 ft x 0 pt 71 mm , pgi sheet 8 ft x 4 ft x 0 pt 50 mm , plywood size 8ft x 4 ft x 19 mm , plywood size 8 ft x4 ft x 06 mm , plywood size 8ft x 4 ft x 10 mm , plywood size 8ft x 4ft x 12 mm , scantling size 10 ft x 2inch x 2inch , scantling size 10 ft x 3inch x 2inch , scantling size 10 ft x 4 inch x 2 inch , planks size 10 ft x 10 inch x 1 point 25 inch , pvc pipe size 4 inch oblique 110 mm dia 06 mtr long , plain bend 4 inch dia , pvc bend 45 degree 4 inch dia , pvc collar 4 inch dia , clamp 4 inch dia , silicon tube 280 ml , downspout 3 inch x 6 inch x 4inch dia , pvc solvent 500 ml , nut and bolt with washer 0 pt 5 inch , screw 1pt 5 inch packet of 100 pcs , screw 1 inch packet of 100 , plastic gitti 1pt 5 inch pack of 100 pcs , ms nails 2 inch comma 3 inch comma 4 inch of 5 kg each , beading 10 ft x1pt 5 inch x 12 inch , self driving screw 2 pt 5 inch , sliding bolt size 12 inch with nut and bolt , sliding bolt size 8 inch with nut and bolt , sliding bolt size 6 inch with nut and bolt , tower bolt 6 inch , tower bolt 4 inch , handle 6 inch , handle 4 inch , ms hinges 3 inch , ms hinges 4 inch , cpvc tank nipple 3 by 4 inch dia , wc european type with cistern and all accessories , wash basin with fastener and all accessories , pvc connection pipe 18 inch length 1 by 2 inch dia , cpvc plain jali 5 inch , cpvc hole jali 5 inch , cpvc bib cock 15 mm , cpvc angle cock 15 mm , curtain rod 5 ft long , window glass size 6 ft x 4inch x 5 mm , daimond glass cutter 3 dash 12 mm , pvc pipe 10 ft x 4 inch tybe b , paint enamel po red pack 20 ltr pack , paint enamel bus green pack of 20 ltr , apex emulsion exterior paint , paint enamel white 04 ltr pack , violet stainer of 200 ml pack , paint black 04 ltr pack , wall putty 20 kgs pack , plaster of paris pop pack of 10 kgs , teracotta red pack of 04 ltr , metal oxide pack of 10 ltr , paint enamel silver 01 ltr pack , touch wood varnish 05 ltr pack , turkey amber polish pack of 400 gm , raw senna pack of 400 ml , lal mitti pack of 400 gm , regmar cloth 120 nos , regmar cloth 100 nos , regmar 80 nos , regmar paper 220 nos , regmar 60 nos , walnut stainer pack of 100 ml , black stainer pack of 50 ml , blue stainer pack of 50 ml , red stainer pack 50 ml , wood primer pack of 04 ltr , oil based distemper 10 ltr pack , yellow oxide stainer pack of 100 ml , fast yellow stainer pack of 50 ml , chowk mitti pack of 05 kgs , fevicol ddl pack of 1 kgs , black mitti pack of 01 kgs , paint enamel golden brown pack of 05 kgs , painting brush 2 inch , painting brush 3 inch , painting brush 4 inch , tarpin oil pack of 20 ltr , paint enamel oxford blue pack of 04 ltr , paint enamel choclate brown 04 ltr pack , paint enamel yellow 04 ltr pack , sprit pack of 05 ltr pack , thinner pack of 05 ltr , box section 40 mm x 30 mm x 4 mm qty 42 mtr , box section 50 mm x 30 mm x 3 mm length 5 mtr total qty 95 mtr , ms flat plate 25 mm x 3 mm total qty 150 mtr , polycarbonate fiber transparent sheet not less than 8mm thick , self drving screw 55mm , self drving screw 25mm , gusset plate 100 mm x 100 mm x 6 mm , aluminum door with glass partition size 1 pt 0 x 2 pt 1 mtr , hinges size 100 mm , aldrop set , light hanging 2 x 2 ft , led tube light 4 feet long 20w , led bulb 9 w 12 w , led concealed ceiling light 12 w square shape crompton , 1 pt 5 mm wire pvc single core copper roll of 100 mtr , 2 pt 5 mm wire pvc single core copper roll of 100 mtr , 05 amp switch module , 05 amp socket module , 15 amp switch module , 15 amp socket module , door bell ding dong and bird sound , angle holder , pvc tape roll pack of 12 pcs , plug top 5 amp , //bid details 2 / 85 plug top 15 amp , batten holder , pendant holder , flexible wire 01 sqmm roll of 100 mtr , mcb 16a , isolator dp 63a

Gusset Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

corporations/Associations/Others