Latest gypsum board partition Tenders | Government gypsum board partition Tenders

State Government

CTN :45604145

22 Jun, 2026 NA

Pune - Maharashtra

Tender For supply of various material - acetylene , admixture , air hose , aldrop 30 cm , bamboo 25 mm , binding wire , brick , butt hinges iron 125 mm , cement (50kg bag) , coal tar paint , copper plate , copper water stopper 16 gauge , cotton waste , crushed sand (excluding royalty charges) , curing compound , delay detonator , diesel , drill rod , electric detonator , empty cement bag , epoxy paint , explosive kelvex-220 , fibre fibrillated polypropylene fibres (910) of any grade of concrete) gm/cum , first aid kit , fly ash , fuse coil , g.l.pipe 100 mm dia. , g.p. electrodes 4 mm , gelatin , geru , ggbs , 2 goggles , hand gloves , handle iron 125 mm. , hook iron & eye oxi 75 mm , hose pipe oxygen & da , j-bolt (for soldier fixing) , kerosene , lh.electrodes 4 mm , 2 latches 250 mm , metal size 40 mm & above (excluding royalty charges) , metal size less than 40 mm (excluding royalty charges) , 3 nails 4 cm , natural sand (excluding royalty charges) , neoprene pad , non teak wood , 7 nozzle-3/64 , nut bolts , nut bolts & washer , nylon rope , oil paint , 2 ordinary detonator , 3 , p.v.c. water stopper, 310 mm wide central , bulb type , painting brush 4" , pickaxe , pin header of standard size , plum bob , polyethylene film 200 gauge , primer , red oxide , rust cleaner , safety helmet , safety shoes , sand blast gun nozzle , shalitex super expansion pad-12 mm thick , spinning belt , spirit level 150 mm. , steel , stone (excluding royalty charges) , stone chips (excluding royalty charges) , super plasticizer , tower bolt irons 200 mm , tower bolt from 250 mm , tripod for chain pully block , turpentine , water , water proofing compound , welding cable 600 amp , welding holder , white glass , wire brush 8 , wire mesh 50 x 50-13 gauge , zinc base oil paint , zinc rich epoxy primer (90%) , gfrp rebar (6 to 16 mm diameter) , gfrp bent rabar (6 to 16 mm diameter) , high strength flexible geogrid (design strength 60 kn/m) , high strength flexible geogrid (design strength 120 kn/m) , high strength flexible geogrid (design strength 195 kn/m) , high strength flexible geogrid (design strength 260 kn/m) , high strength flexible geogrid (design strength 325 kn/m) , uv resistant needle punch non woven geotextile (150 gsm) , geosynthetic drainage composite , mechanically woven double twisted hexagonal shaped wire mesh gabion boxes (zine+pvccoated) , mechanically woven double twisted hexagonal shaped wire mesh gabion boxes (zinc+10% al alloy+pvc coated) , muchanically woven double twisted hesagnanal shaped wire mesh gabion boxes (zinc+high abrasion resistant polymer class a coated) , lacing wire

State Government

CTN :45511036

02 Jul, 2026 35.31 Crore

Yamunanagar - Haryana

Tender For strengthening of saharanpur-kurukshetra (sh-06) road (id 559) km.37.18 to 50.195 and 52.255 to 55.00) providing 115mm dbm plus 40mm bc along with geogrid in yamuna nagar district

CTN :45501726

22 Jun, 2026 12.21 Lacs

Bangalore - Karnataka

Tender For providing platform for cooling towers near main ac plant and gypsum board partition in various locations at isite campus, ursc marathahalli, bengaluru

State Government

CTN :45343214

04 Jun, 2026 56.93 Lacs

Daman - Gujarat

Tender For providing and supplying of auxiliary items for old collectorate, daman - civil works others, providing and fixing 25mm thick commercial grade plywood on ms structural framework, including fabrication and erection of necessary m.s. square/rectangular pipe structure, cutting, welding, grinding, primer painting, fixing of plywood with suitable screws, nuts, bolts and approved hardware fittings, complete with all labour, materials, tools & tackles, transportation, loading/unloading, scaffolding and finishing work as directed by the engineer-in-charge., providing and fixing 15mm thick engineered solid wood flooring of approved make such as mikasa or equivalent, comprising top uv coated wooden wear layer bonded on plywood base, in approved shade and pattern, including surface preparation, underlay wherever required, adhesive fixing, cutting, edge finishing, skirting/joint treatment, complete installation with all necessary accessories, labour, tools & tackles, transportation, loading/unloading and finishing work as directed by the engineer-in-charge., providing and fixing 15mm thick engineered solid wood flooring skirting and t-patti work in approved shade and finish, including 75mm / 50mm size matching wooden skirting, plywood base/patti as required, fixing with suitable adhesive, nails and hardware accessories, cutting, edge finishing, polishing and complete installation with all labour, materials, tools & tackles, transportation, loading/unloading and finishing work, complete as directed by the engineer-in-charge., providing and fixing 3mm thick underlay foam sheet below wooden flooring, of approved quality and make, including surface cleaning and preparation, laying with proper alignment and jointing as per manufacturer specifications, complete with all labour, materials, tools & tackles, transportation, loading/unloading and necessary finishing work, as directed by the engineer-in-charge., labour charges for laying and fixing wooden flooring, including application of approved adhesive/glue and liquid compound, proper cutting, fitting, alignment and finishing of flooring boards/tiles, complete with necessary labour, tools & tackles, handling, cleaning and all incidental works required for proper installation, as directed by the engineer-in-charge., providing and fixing gypsum board partition/wall panelling above bathroom wall area, using approved quality moisture resistant gypsum board fixed on g.i. framework with necessary channels, studs, screws and jointing compound, including cutting, finishing, taping of joints, surface preparation and complete installation with all labour, materials, tools & tackles, scaffolding, transportation, loading/unloading and finishing work, as directed by the engineer-in-charge., providing and fixing room carpet of approved quality, design, colour and make, suitable for indoor flooring application, including necessary underlay wherever required, cutting to required size, transportation, loading/unloading and all incidental charges, complete as directed by the engineer-in-charge., providing, testing & commissioning 40 litre capacity solid door thermo-electric mini bar/refrigerator of approved make and model, suitable for hotel/office/residential use, complete with adjustable shelves, temperature control system and all standard accessories, including transportation, loading/unloading, placement at site and testing & commissioning, complete as directed by the engineer-in-charge., providing and fixing hotel safety locker/safe of size 200 x 420 x 370 mm, black colour, with electronic digital locking system, suitable for hotel/office/residential use, complete with mounting accessories and standard fittings (battery not included), including transportation, loading/unloading, installation and testing, complete as directed by the engineer-in-charge., providing testing & commissioning double layer electric kettle, black colour, of approved make and capacity, with stainles

Central Government/Public Sector

CTN :45334809

25 Jun, 2026 NA

Solapur - Maharashtra

Tender For signalling work in connection with bcm work with geogrid and geo-textile method (tftr & tbr) in solapur division of central railway.

corporations/Associations/Others

CTN :45288535

15 Jun, 2026 1.05 Crore

Allahabad - Uttar Pradesh

Tender For providing design and drawing(iit vetted) of r.e. wall, earth work, pcc levlling pad, casting and erection assembling and joining of panel filling of fine sand including synthetic geogrid and geo composite drainage sheet with compaction including all

Central Government/Public Sector

CTN :45252446

10 Jun, 2026 NA

Vadodara - Gujarat

Tender For through formation treatment (tftr) with biaxial geogrid, geotextile and other track works under the jurisdiction of sr. den/south/brc.

corporations/Associations/Others

CTN :45069073

18 May, 2026 1.05 Crore

Allahabad - Uttar Pradesh

Tender For providing design and drawing(iit vetted) of r.e. wall, earth work, pcc levlling pad, casting and erection assembling and joining of panel filling of fine sand including synthetic geogrid and geo composite drainage sheet with compaction including all

State Government

CTN :44984814

14 May, 2026 35.31 Crore

Yamunanagar - Haryana

Tender For strengthening of saharanpur-kurukshetra (sh-06) road (id 559) km.37.18 to 50.195 and 52.255 to 55.00) providing 115mm dbm plus 40mm bc along with geogrid in yamuna nagar district

Central Government/Public Sector

CTN :44951741

02 May, 2026 63.63 Lacs

Hyderabad - Telangana

Tender For construction of full-scale field test sections for (i) pet geogrid-reinforced base/subbase layers, (ii) 2d/3d drainage geocomposites embedded gsb layers, (iii) asphalt-interlayer grids, and (iv) fly ash-geopolymer stabilized marginal aggregate bases at iit hyderabad (2nd call).

Gypsum Board Partition Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors