Latest hammer mill Tenders | Government hammer mill Tenders

CTN :43083414

15 Dec, 2025 NA

Multi City - Gujarat

Tender For purchase of new mill roller shaft with shell completeassembly. (mill roller size 36 x 78)

corporations/Associations/Others

CTN :43064631

26 Dec, 2025 NA

Barsingsar - Rajasthan

Tender For supply of rotor bolt pin for hammer mill 650x45mm,skirt board top cover for 1000mm conveyor size 1500x850, 3.15mm thick,skirt board top cover for 1200mm conveyor size 1500x950, 3.15mm thick,u clamp m12x80, item includes with one u clamp 4nos hex nuts,counter weight rod, solid, size 2200x22, rod includes 2nos hex nuts

CTN :43075421

05 Jan, 2026 50.35 Lacs

Murshidabad - West Bengal

Tender For procurement of roller journal bearings for coal mill zgm123n at bm-1 department, stage-1,sgtpp.

Central Government/Public Sector

CTN :42933650

09 Dec, 2025 NA

Solapur - Maharashtra

Tender For corrigendum : procurement of mill hydraulic roller position feedback sensors for ntpcsolapur

Central Government/Public Sector

CTN :42566160

09 Dec, 2025 NA

Raipur - Chhattisgarh

Tender For corrigendum : procurement of limestone crusher hammer mill for fgd fm mm at ntpc kudgi

State Government

CTN :42966383

09 Dec, 2025 30.00 Lacs

Kota - Rajasthan

Tender For corrigendum : name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special a

CTN :43016254

09 Dec, 2025 7.71 Lacs

Belagavi - Karnataka

Tender For construction of metaling road from bhushan upadhyay house to nala from halaga village in belgaum taluk. from 1.12 km to 1.8 km - crushed stone chippings 13.2 mm.,, crushed stone course aggregate 53.,, caseii - unsurfaced gravelled road (add 10 % of cost of carriage to cover cost of loading and unloading), tipper 5 cum capacity,., front end loader 1 cum capacity,., generator 100 kva,., wet mix plant (pug mill),., grit / stone dust.,, fine aggregate/crushed sand 2.36mm - 75 micron at 30, fine aggregate 10mm ,., coarse aggreages 12 mm,.,, granite metal 20 mm.,, granite metal 40 mm.,, vibratory roller 8 tonne,., water tanker,, gravel 2.36 mm/murrum,, water.,., tractor - 40 hp.

CTN :43017644

09 Dec, 2025 35.29 Lacs

Belagavi - Karnataka

Tender For construction of metaling road from basarikatti chandanahosura road to sambrekar and desaivar s land in belgaum taluka - semi skilled,, fitter(grade1).,., fine aggregate 10mm ,., name ., binding wire,., tmt bars fe 500,., add handling loading and unloading at 2% on material.,, rcc pipes np2 900mm dia including collars., add 24% centering(since centering area increased), add watering charges at 1 % on material.,, mixer (concrete) - 1 cum capacity.,, portland cement,., broken stone aggregate 12 mm to 10 mm size,, broken stone aggregate 20 mm size,, broken stone aggregate 40 mm size,, coarse sand (zone iii),, boulders.,, crushed stone chippings 13.2 mm.,, crushed stone course aggregate 53.,, caseii - unsurfaced gravelled road (add 10 % of cost of carriage to cover cost of loading and unloading), tipper 5 cum capacity,., front end loader 1 cum capacity,., generator 100 kva,., wet mix plant (pug mill),., grit / stone dust.,, fine aggregate/crushed sand 2.36mm - 75 micron at 30, coarse aggreages 12 mm,.,, granite metal 20 mm.,, granite metal 40 mm.,, vibratory roller 8 tonne,., water tanker,, gravel 2.36 mm/murrum,, water.,., tractor - 40 hp.

CTN :43017659

09 Dec, 2025 36.00 Lacs

Belagavi - Karnataka

Tender For construction of metaling road from peejaar land to yallappa chikkalaki land near chalakate in tarihal village of belgaum taluk - semi skilled,, fitter(grade1).,., rcc pipes np2 750mm dia, binding wire,., tmt bars fe 500,., add handling loading and unloading at 2% on material.,, rcc pipes np2 900mm dia including collars., add 24 percent centering charges (since centering area increased), mixer (concrete) - 1 cum capacity.,, portland cement,., broken stone aggregate 12 mm to 10 mm size,, broken stone aggregate 40 mm size,, broken stone aggregate 20 mm size,, coarse sand (zone iii),, boulders.,, crushed stone chippings 13.2 mm.,, crushed stone course aggregate 53.,, tipper 5 cum capacity,., front end loader 1 cum capacity,., generator 100 kva,., wet mix plant (pug mill),., grit / stone dust.,, fine aggregate/crushed sand 2.36mm - 75 micron at 30, fine aggregate 10mm ,., coarse aggreages 12 mm,.,, granite metal 20 mm.,, granite metal 40 mm.,, vibratory roller 8 tonne,., water tanker,, gravel 2.36 mm/murrum,, water.,., tractor - 40 hp.

Central Government/Public Sector

CTN :43016572

24 Dec, 2025 NA

Izatnagar - Uttar Pradesh

Tender For supply of modern feed processing plant : : -modern feed processing plant , hammer mill screen , hammer set , bearing , bracket , adapter sleeve , hexbol full thread , guard plate , coupling tyre , pillow block bracket ucp 208 fk , hammer mill rod 1 set , buckets of bucket elevator , bucket bolt , flat belt 10 mtr

Hammer Mill Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector