Latest hammer mill Tenders | Government hammer mill Tenders

State Government

CTN :40534123

05 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of c.i./c.s. casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c

CTN :40528898

05 Jun, 2025 NA

Kheri - Uttar Pradesh

Tender For belrayan supply of rubber goods - neoprime rubber sheet for 200 degree hardness-70 different thickness, synthetic rubber sheet for exhaust valve of pan no.3 & 4 size od-440mm & thick-20mm, epdm rubber sheet for pan discharge valve no.6 & 7-as per drg.no.sscm-38, epdm rubber sheet for exhaust valve of pan no. 6&7 item no 03 as per drg no. sscm-42, epdm rubber sheet for pan no.8 exhaust valve as per drg no sscm-43, epdm rubber sheet for actuated butterfly valve system 12 , epdm rubber sheet for actuated butterfly valve system 6 , neoprime rubber sheet id-470mmxod-600mmxthickness-25mm, mud seal of triveni make juice clearifier of neoprime rubber as per drg.no.10/sscm, synthetic rubber v-seal ring for 1000 s/d machine as per drg.no. 49/sscm- part no.05, epdm rubber sheet for pan no. 1 to 4 discharge valve-as per drg.no. 07/sscm, synthetic rubber sheet for pan discharge valve heat resistance 200 digree for pan no. 1 & 2 as per drg. no. 50/sscm, synthetic rubber sheet for pan no. 3 & 4 vapour & exhaust valve heat resistnce 200 digree od-455mmxid-330mm & thickness-24mm, synthetic rubber sheet for pan no. 3 7 4 vapour & exhaust valve heat resistance 200 digree size-od-440mmxid-80mmxthick-22mm, synthetic rubber sheet angle valve heat resistance 200degree for for pan no 3 exhaust line 16 , synthetic rubber sheet angle valve heat resistance 200degree for for pan no 4 vapour line 16 , synthetic rubber sheet angle valve heat resistance 200degree for for pan no 3 vapour line 16 , synthetic rubber sheet for pan no. 5 & 8 heat resistance-200digree as per drg no 32/sscm, synthetic rubber sheet for pan no. 5 & 8 heat resistance-200digree as per drg no 32/sscm od-665mmxid-560mm x thick-25mm, synthetic rubber sheet for pan no.05 discharge valve heat resistance-200 digree, standard rubber bush- different sizes id x od x length, " x 7/8" x 1", 5/8" x 1" x 1.25", 5/8" x 1-1/8" x 1.5", " x 1-1/8" x 1.5", " x 1-1/4" x 1-3/4", 1" x 2" x 2", 7/8" x 1.5" x 1.5", " x 1.5" x 1.5", 5/8" x 1.5" x 1.5", 5/8" x 1.25" x 1.25", x 1 x 1 , x 2 x 2 , 30 x 60 x 60mm, 15 x 30 x 30mm, standard metallic brass linned rubber bush in different sizes, 21 x 40 x 40mm, 29 x 64 x 64mm, 13 x 25 x 22mm, 13 x 25 x 20mm, 12 x 25 x 20mm, 20 x 32 x 32mm, 25 x 32 x 42mm, 16 x 35 x 35mm, 20 x 38 x 50mm, 30 x 65 x 65mm, x 1 x 1 mm, 16 x 38 x 38mm, 20 x 45 x 45mm, 20 x 38 x 40mm, rubber oil seal for nk 1350kt c/f machine size-130x105x13mm, rubber v-seal ring for 1350 kt c/f m/c., rubber v-seal ring for sc-1100 c/f/m/c, rubber oil seal for sc-1100 c/f/m/c-size-120x100x13mm, rubber v-seal ring for nk-1503 c/f m/c pulley housing, rubber v-seal ring main bearing housing for nk1503 c/f,m/c., rubber o ring for 1350 kt c/f m/c, rubber o ring for 1350 kt c/f m/c size- 80x85mm, rubber o ring for sc-1100 c/f m/c, rubber o ring size- 409x395x07mm, ep rubber seat for discharge valve for 80 ton pan no 9 & 10 as pre drg., damping pad for nk1503 continious centrifugal machine, damping pad for 1350 kt/ng1250 c/f m/c., rubber u-tyre for nk1503/1350kt/nf1250 continous c/f m/c, rubber buffer for mill belt conveyor size-114x180x50mm as per sample., rubber seal for c/f air cylinder (as per sample) 40x22x10mm, rubber seal for c/f air cylinder (as per sample) 40x26x10mm, rubber bucket for ng 1250 c/f m/c plough in & out size-22x10x35mm, rubber bucket for ng 1250 c/f m/c plough up & down 22x60x25mm, rubber bucket for pug mill gate valve, hydraulic chevron packing for nhec make size-39"x78" size-70mm id x 400mm odx58mm-part no.5564/5565/5566 (one set of 5 packing), 10 arm p.u. rubber star ng-1250 c/f m/c, rubber bucket in & out size- 22x139x40mm, rubber bucket for syrup separator cylinder mrmp-02675, rubber bucket for flap valve 125x74x30, neoprime rubber belt for ng-1503 c/f m/c sie-06x60x5400mm, rubber taper plug for quad suitable for 42mm id tube, rubber taper plug for quad suitable for 90/96mm id tube, antivibration damping pad for sc-1100 c/f m/c

CTN :40468643

14 Jun, 2025 1.22 Lacs

Panchkula - Haryana

Tender For supply of cnc machines tool holders - er32 set of collet dia 2mm to 20mm ref code 32ers000m (kenametal) , bt40 er32 collet chuck with wrench bt40er32070m , bt40 er32 collet chuck with wrench bt40er32120m , bt40 er16 collet chuck with wrench bt40er16060m (widia) , er16 collet dia 01 mm er16010m (widia) for collet chuck item 4 , bt40 er32 collet chuck gl120 with wrench bt40er32120m , bt40 er32 collet dia 6 mm 32er060m , drill adopter for holding shank mt1 bt40mt1 1050m (widia) , drill adopter for holding shank mt2 bt40mt2 2050m (widia) , drill adopter for holding shank mt3 bt40mt3 3070m (widia) , drill adopter for holding shank mt4 bt40mt4 4095m (widia) , key less drill chuck range dia 01-13mm (widia) , bt40 end mill holder dia 20 bt40bem20063m (widia) , bt40 end mill holder dia 25 bt40bem25090m( widia) , bt40 end mill holder dia 40 bt40wn40105ad (widia)

Central Government/Public Sector

CTN :39926264

26 May, 2025 NA

Durg - Chhattisgarh

Tender For bid to ras procurement of drawings based fasteners bolts and studs - high tensile stud with two bright nuts m20 x 250 mm as per drg no m by p by 289 by 14 , high tensile stud with two bright nuts m20 x 300 mm as per drg no m by p by 289 by 15 , high tensile stud with two bright nuts m24 x 320 mm as per drg no m by p by 290 by 6 , high tensile stud with two bright nuts m24 x 300 mm as per drg no m by p by 290 by 5 , high tensile stud with two bright nuts m30 x 300 mm as per drg no m by p by 290 by 8 by 3 , high tensile stud with two bright nuts m30 x 250 mm as per drg no m by p by 290 by 8 by 2 , high tensile stud with two bright nuts m30 x 350 mm as per drg no m by p by 290 by 8 by 4 , high tensile stud with two bright nuts m16 x 60 mm as per drg no m by m by 289 by 3 , high tensile stud with two bright nuts m16 x 70 mm as per drgno m by m by 289 by 4 , high tensile stud with two bright nuts m16 x 80 mm as per drg no m by m by 289 by 5 , high tensile stud with two bright nuts m16 x 90 mm as per drg no m by p by 289 by 7 , high tensile stud with two bright nuts m16 x 100 mm as per drg no m by p by 289 by 9 , high tensile stud with two bright nuts m16 x 110 mm as per drg no m by p by 289 by 9 , high tensile stud with two bright nuts m16 x 120 mm as per drg no m by p by 289 by 9 , bucket bolt for bucket elevator 55mm long with nut and washer as per drg no m by m by 013 item 3 , bucket bolt for bucket elevator 45mm long with nut and washer as per drg no m by m by 013 item 3 , high tensile machine bolt with nylock nut for housing of dds screens as per drg no m by m by 321 item 4 , coupling bolt for eot cranes and hoists as per drg no m by m by 70 item c and d , coupling bolt with hex nut and spring washer as per drg no m by m by 517 by item 2 , liner bolt with 2 nuts and washer for tube mill basic and silica as per drg no m by m by 053 by 3c , liner bolt with 2 nuts and washer for tube mill basic and silica as per drg no m by m by 053 by 3d , adjusting screw assembly hanger assembly as per drg no m by m by 513

Central Government/Public Sector

CTN :40362619

30 May, 2025 NA

Panipat - Haryana

Tender For supply of feed roll end cover liner as per sr. no. 1 of buyer specification document , thrust plate rc feeder bowl mill xrs-603 as per item sr. no. 2 of buyer specification document , stub for coal pipe(pf line) as per item sr. no. 3 of buyer specification document

Central Government And Public Sector

CTN :40383455

28 May, 2025 NA

Kalpakkam - Tamil Nadu

Tender For supply of to cryogenic ultrta low heat treatment size 1 by 2 inch x 6 inch long x 10 percentage cobalt , item no. 33-hss cutting tool bits square ends harderned ground to cryogenic ultrta low heat treatment size 5 by 8 inchx 6inch long x 10 percentage cobalt , item no. 34-wheel grinding silicon carbide 150 x 25 x31.75 mm 4200 rpm fine , item no. 35-wheel grinding silicon carbide 150 x 25 x31.75 mm 4200 rpm rough , item no. 36-threading die nut 1 by 2 inch bsw , item no. 37- threading die nut 7 by 8 inch bsw , item no. 38-threading die nut 3 by 4inch bsw , item no. 39- revoling center mt 5 , item no. 40-carbide tipped bar turning tools116 gradep30-rh-1212. , item no. 41-carbide tipped bar turning tools 116 gradep30-lh-1212. , item no. 42-carbide tipped cranked round noseturning tools 115 grade p30-rh-1212 , item no. 43-miranda make carbide tipped straightround nose turning tools 113 gradep30-1616 , item no. 44- carbide tipped cranked turning and facingtools conforming to iso 2 111gradep30-lh-1212 , item no. 45-carbide tipped cranked turning and facingtools conforming to iso2 111gradep30-lh-1616 , item no. 46-parallel shank end mill cutter size 3mm dia x 10mm length x 42mm overall length , item no. 47- straight shank end mill cutters 6mm dia , item no. 48-end mill cutter 8 mm , item no. 49-hss straight shank end mill cuttersaddision 5 mm dia with 5 mm parallel , item no. 50-hss parallel shank end mill cutter stdseries , item no. 51-addison hss parallel shank end millcutters , item no.52- twist drill 3mm dia 2 flutes straightshank micrograin solid carbide coatedwith titanium aluminium nitride tialn , item no.53-twist drill 6mm dia 2 flutes straightshank micrograin solid carbide coatedwith titanium aluminium nitride tialn , item no. 54-twist drill 12mm dia 2 flutes straightshank micrograin solid carbide coatedwith titanium aluminium nitride tialn , item no. 55-twist drill 10mm dia 2 flutes straightshank micrograin solid carbide coatedwith titanium aluminium nitride tialn , item no. 56-end mill cutter 4 mm dia , item no.57- 1parallel shank cutter hss end mill as perbs 122 1953 is 6353-1991 , item no.58-bimetal band saw blade , item no. 59- miranda make bimetal band saw blade coil

Central Government/Public Sector

CTN :40216609

29 May, 2025 NA

Asansol - West Bengal

Tender For corrigendum : design, engineering, manufacture, supply, supervision of erection, testing, commissioning and conducting performance guarantee tests etc. of 2 sets secondary crushers of hammer mill type alongwith other equipment required on behalf of m/s sms_i_ for coal handling facilities for stamp charged cob-12 site of iisco steel plant _sail-isp_ at burnpur, asansol _wb_.

Central Government/Public Sector

CTN :40213393

29 May, 2025 NA

Burnpur - West Bengal

Tender For corrigendum : design, engineering, manufacture, supply, supervision of erection, testing, commissioning and conducting performance guarantee tests etc. of 2 sets secondary crushers of hammer mill type alongwith other equipment required on behalf of m/s sms

Central Government And Public Sector

CTN :40419543

11 Jun, 2025 NA

Multi City - Multi State

Tender For liner assembly for pug mill as per rwf drawing no: 701091610500. one set of liner plates c onsists of item no 1 = 4 no, item no 2 = 8 no, item no 3 = 2 no, item no 4 = 2 no, item no 5 = 2 no, item no 6 = 2 no, item no 7 = 2 no and item no 8 = 2 no. note: a) mtc should be accompanied along with the suppl y, b) material should be guaranteed for a minimum period of 12 months from the date of fitment or 18 mon ths from the date of supply whichever is earlier. [ warranty period: 18 months after the date of delivery ]

Corporations And Associations And Others

CTN :40300747

22 May, 2025 NA

Karnal - Haryana

Tender For corrigendum : casting items - casting items & trash plate, cast steel trash plate mill no. 1 drg. no. ss0124-05252501-011-0004 material:- is: 1030 gr- 280/520w, cast steel trash plate mill no. 02 drg. no. ss0124-05252501-011-0005 material:- is: 1030 gr-280/520w, cast steel trash plate mill no. 03 drg. no. ss0124-05252501-011-0006 material:- is:1030 gr. 280/520w, cast steel trash plate mill no. 04 drg. no.ss0124-05252501-011-0007 material:- is:1030 gr. 280/520w, top half to top roller bearing liner drg. no. ss 0124-05251501-011-0027 qty-01 no., feed/discharge roller bearing liner material leaded bronze (bs en 1982, 2008 gr cc495 k, table 28) qty- 2 drg no. ss0124-5251501-011-0034, bush for fibrizer hammer item code mlett 109 material phosphorus bronze bsen 1982:2008, size od 80mm, id 70mm, 56 mm width qty- 128 nos as per drg. no. ss0124-05152001-011-0005 (approx. weight- 172 kg), fibrizer hammer material grade e250a, is2062-2011 made from 56 mm plate with g.m bush fitted & duly hard faced finish wt. 225 kgs as per drg no. ss0124-05152001-011-005, cast steel scrapper mill no. 1&2 top material:- is:1030 gr, 280/520w, drg. no. ss0124-05250532-011-0054, cast steel scrapper mill no. 3&4 top material:- is:1030 gr 280/520 w, drg. no.:-ss0124-05250532-011-0055, cast steel scrapper mill no. 1, bottom material:- is:1030 gr 280/520w, drg. no.:-ss0124-05250532-011-0060, cast steel scrapper mill no. 2, bottom material:- is:1030 gr280/520w, drg.no.:-ss0124-05250532-011-0061, cast steel scraper mill no.3, bottom material:-is:1030 gr280/520w, drg.no.:-ss0124-05250532-011-0062, cast steel scraper mill no.4, bottom material:-is:1030 gr280/520w, drg.no.:-ss0124-05250532-011-0064

Hammer Mill Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors